[v1,51/63] input: Atmel: limit the max bytes transferred while reading T5 messages
diff mbox series

Message ID 20190816083757.19449-2-jiada_wang@mentor.com
State Superseded
Headers show
Series
  • atmel_mxt_ts misc
Related show

Commit Message

Jiada Wang Aug. 16, 2019, 8:37 a.m. UTC
From: Deepak Das <deepak_das@mentor.com>

"a008387 Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c
transaction" limited the Max bytes transferred in i2c transaction while
reading T5 message in mxt_process_messages_until_invalid().

mxt_process_messages_t44() reads the T44 message which contains the
pending T5 message count. If the number of pending T5 messages returned
by T44 message is too high then there is a risk of i2c transaction
timeout while reading T5 messages in mxt_process_messages_t44().

To avoid i2c transaction timeout, this commit limits the max bytes
transferred in a single transaction while reading T5 messages in
mxt_process_messages_t44() depending on the property 'atmel,mtu'.
This improvement is created based on the commit "a008387 Input:
atmel_mxt_ts: Limit the max bytes transferred in an i2c
transaction"

Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 73 ++++++++++++++----------
 1 file changed, 44 insertions(+), 29 deletions(-)

Patch
diff mbox series

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2041a82a4551..47c1e72152de 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1472,11 +1472,32 @@  static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
 	return num_valid;
 }
 
+static u8 mxt_max_msg_read_count(struct mxt_data *data, u8 max_T5_msg_count)
+{
+	u8 T5_msg_count_limit = data->mtu / data->T5_msg_size;
+
+	if (!data->mtu)
+		return max_T5_msg_count;
+
+	if (data->mtu < data->T5_msg_size) {
+		WARN(1, "mtu set is lesser than the T5 message size\n");
+		/* Return count of 1, as fallback */
+		return 1;
+	}
+	/*
+	 * Return maximum number of T5 messages in single i2c transaction
+	 * based on "atmel,mtu" property.
+	 */
+	return min(T5_msg_count_limit, max_T5_msg_count);
+}
+
 static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int ret;
-	u8 count, num_left;
+	u8 T5_msg_count, total_pending;
+	u8 total_processed = 0;
+	u8 processed_valid = 0;
 
 	/* Read T44 and T5 together */
 	ret = __mxt_read_reg(data->client, data->T44_address,
@@ -1486,18 +1507,19 @@  static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 		return IRQ_NONE;
 	}
 
-	count = data->msg_buf[0];
+	T5_msg_count = data->msg_buf[0];
 
 	/*
 	 * This condition may be caused by the CHG line being configured in
 	 * Mode 0. It results in unnecessary I2C operations but it is benign.
 	 */
-	if (count == 0)
+	if (!T5_msg_count)
 		return IRQ_NONE;
 
-	if (count > data->max_reportid) {
-		dev_warn(dev, "T44 count %d exceeded max report id\n", count);
-		count = data->max_reportid;
+	if (T5_msg_count > data->max_reportid) {
+		dev_warn(dev, "T44 count %d exceeded max report id\n",
+			 T5_msg_count);
+		T5_msg_count = data->max_reportid;
 	}
 
 	/* Process first message */
@@ -1507,16 +1529,25 @@  static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 		return IRQ_NONE;
 	}
 
-	num_left = count - 1;
+	total_pending = T5_msg_count - 1;
+	if (!total_pending)
+		goto end;
 
 	/* Process remaining messages if necessary */
-	if (num_left) {
-		ret = mxt_read_and_process_messages(data, num_left);
+	T5_msg_count = mxt_max_msg_read_count(data, total_pending);
+
+	do {
+		if ((total_pending - total_processed) < T5_msg_count)
+			T5_msg_count = total_pending - total_processed;
+		ret = mxt_read_and_process_messages(data, T5_msg_count);
 		if (ret < 0)
 			goto end;
-		else if (ret != num_left)
-			dev_warn(dev, "Unexpected invalid message\n");
-	}
+		total_processed += T5_msg_count;
+		processed_valid += ret;
+	} while (total_processed < total_pending);
+
+	if (processed_valid != total_pending)
+		dev_warn(dev, "Unexpected invalid message\n");
 
 end:
 	if (data->update_input) {
@@ -1527,29 +1558,13 @@  static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 	return IRQ_HANDLED;
 }
 
-static u8 mxt_max_msg_read_count(struct mxt_data *data)
-{
-	u8 count_limit = data->mtu / data->T5_msg_size;
-
-	if (!data->mtu)
-		return data->max_reportid;
-
-	if (data->mtu < data->T5_msg_size) {
-		WARN(1, "mtu set is lesser than the T5 message size\n");
-		/* Return count of 1, as fallback */
-		return 1;
-	}
-
-	return min(count_limit, data->max_reportid);
-}
-
 static int mxt_process_messages_until_invalid(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int count, read;
 	int tries;
 
-	count = mxt_max_msg_read_count(data);
+	count = mxt_max_msg_read_count(data, data->max_reportid);
 	tries = (data->max_reportid / count) + 1;
 
 	/* Read messages until we force an invalid */