linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<jiada_wang@mentor.com>, <george_davis@mentor.com>
Subject: [PATCH v1 56/63] Input: atmel_mxt_ts: Use complete when in_bootloader true
Date: Fri, 16 Aug 2019 17:38:23 +0900	[thread overview]
Message-ID: <20190816083830.19553-2-jiada_wang@mentor.com> (raw)
In-Reply-To: <20190816083830.19553-1-jiada_wang@mentor.com>

From: Dean Jenkins <Dean_Jenkins@mentor.com>

In mxt_interrupt(), complete(&data->chg_completion) was
called everytime mxt_interrupt() ran which is unnecessary.

mxt_regulator_enable() sets data->in_bootloader to true and
waits for the completion indication for data->chg_completion
to be set by mxt_interrupt().

mxt_interrupt() already has a test for data->in_bootloader
being true so move complete(&data->chg_completion) inside
that test.

Here is some analysis of some old commits relating to the
usage of complete(&data->chg_completion):

e6c4b6160d2 ("Input: atmel_mxt_ts - rename bl_completion to
chg_completion")

This old commit moved the "complete" statement from inside a
test for data->in_bootloader being true to run everytime
mxt_interrupt() executed. It is unclear why this was done.

This new commit reverses that modification back to the original
implementation.

4c814dd5c6ae ("Input: atmel_mxt_ts - make bootloader interrupt
driven")

This old commit modified mxt_load_fw() to no longer use the
data->chg_completion solution so only mxt_regulator_enable()
uses the data->chg_completion solution.

Therefore, only mxt_regulator_enable() now needs to be
supported by the data->chg_completion solution.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 40263ef79e8e..64a1a6815d56 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1631,9 +1631,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 	struct mxt_data *data = dev_id;
 	int ret;
 
-	complete(&data->chg_completion);
-
 	if (data->in_bootloader) {
+		complete(&data->chg_completion);
+
 		if (data->flash && &data->flash->work)
 			cancel_delayed_work_sync(&data->flash->work);
 
-- 
2.19.2


  reply	other threads:[~2019-08-16  8:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16  8:38 [PATCH v1 55/63] Input: atmel_mxt_ts: Use msecs_to_jiffies() instead of HZ Jiada Wang
2019-08-16  8:38 ` Jiada Wang [this message]
2019-08-16  8:38 ` [PATCH v1 57/63] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2019-08-16  8:38 ` [PATCH v1 58/63] Input: atmel_mxt_ts: Remove sysfs attributes during driver detach Jiada Wang
2019-08-16  8:38 ` [PATCH v1 59/63] Input: atmel_mxt_ts: Prevent crash due to freeing of input device Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816083830.19553-2-jiada_wang@mentor.com \
    --to=jiada_wang@mentor.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=george_davis@mentor.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).