From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jiada_wang@mentor.com>, <george_davis@mentor.com>
Subject: [PATCH v1 37/63] input: atmel_mxt_ts: export GPIO reset line via sysfs
Date: Fri, 16 Aug 2019 17:34:59 +0900 [thread overview]
Message-ID: <20190816083525.19071-3-jiada_wang@mentor.com> (raw)
In-Reply-To: <20190816083525.19071-1-jiada_wang@mentor.com>
From: "George G. Davis" <george_davis@mentor.com>
N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will
cause problems with normal driver operation. This feature is provided
as a diagnostic debug aid. It does not take into consideration any
pending operations which may be in progress. Modifying the atmel_mxt_ts
GPIO reset line at any time will inevitably cause the driver to fail.
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a8e2b927bb12..def9f94d73ef 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4240,6 +4240,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
+ if (data->reset_gpio) {
+ error = gpiod_export(data->reset_gpio, 0);
+ if (error)
+ return error;
+
+ error = gpiod_export_link(&client->dev, "reset",
+ data->reset_gpio);
+ if (error) {
+ gpiod_unexport(data->reset_gpio);
+ return error;
+ }
+ }
+
if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
error = mxt_acquire_irq(data);
if (error)
@@ -4273,6 +4286,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
mxt_free_input_device(data);
mxt_free_object_table(data);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
return error;
}
@@ -4282,6 +4299,10 @@ static int mxt_remove(struct i2c_client *client)
disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
--
2.19.2
next prev parent reply other threads:[~2019-08-16 8:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 8:34 [PATCH v1 35/63] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2019-08-16 8:34 ` [PATCH v1 36/63] Input: atmel_mxt_ts - configure and use gpios as real gpios Jiada Wang
2019-08-16 17:24 ` Dmitry Torokhov
2019-08-23 5:16 ` Jiada Wang
2019-08-16 8:34 ` Jiada Wang [this message]
2019-08-16 8:35 ` [PATCH v1 38/63] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2019-08-16 8:35 ` [PATCH v1 39/63] Input: touchscreen: Atmel: Add device tree support for T15 key array objects Jiada Wang
2019-08-16 17:25 ` Dmitry Torokhov
2019-08-22 7:57 ` Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816083525.19071-3-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=dmitry.torokhov@gmail.com \
--cc=george_davis@mentor.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).