From: YueHaibing <yuehaibing@huawei.com>
To: <avifishman70@gmail.com>, <tmaimon77@gmail.com>,
<tali.perry1@gmail.com>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <mturquette@baylibre.com>,
<sboyd@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<openbmc@lists.ozlabs.org>, YueHaibing <yuehaibing@huawei.com>
Subject: [PATCH -next] clk: npcm7xx: remove unused code
Date: Fri, 16 Aug 2019 22:11:32 +0800 [thread overview]
Message-ID: <20190816141132.55060-1-yuehaibing@huawei.com> (raw)
drivers/clk/clk-npcm7xx.c:365:48: warning:
npcm7xx_divs_fx defined but not used [-Wunused-const-variable=]
drivers/clk/clk-npcm7xx.c:438:43: warning:
npcm7xx_gates defined but not used [-Wunused-const-variable=]
The two variables are never used, so remove them,
also remove related type declarations.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
drivers/clk/clk-npcm7xx.c | 157 ----------------------------------------------
1 file changed, 157 deletions(-)
diff --git a/drivers/clk/clk-npcm7xx.c b/drivers/clk/clk-npcm7xx.c
index 27a86b7..9c5390c 100644
--- a/drivers/clk/clk-npcm7xx.c
+++ b/drivers/clk/clk-npcm7xx.c
@@ -100,9 +100,6 @@ npcm7xx_clk_register_pll(void __iomem *pllcon, const char *name,
return hw;
}
-#define NPCM7XX_CLKEN1 (0x00)
-#define NPCM7XX_CLKEN2 (0x28)
-#define NPCM7XX_CLKEN3 (0x30)
#define NPCM7XX_CLKSEL (0x04)
#define NPCM7XX_CLKDIV1 (0x08)
#define NPCM7XX_CLKDIV2 (0x2C)
@@ -110,38 +107,7 @@ npcm7xx_clk_register_pll(void __iomem *pllcon, const char *name,
#define NPCM7XX_PLLCON0 (0x0C)
#define NPCM7XX_PLLCON1 (0x10)
#define NPCM7XX_PLLCON2 (0x54)
-#define NPCM7XX_SWRSTR (0x14)
-#define NPCM7XX_IRQWAKECON (0x18)
-#define NPCM7XX_IRQWAKEFLAG (0x1C)
-#define NPCM7XX_IPSRST1 (0x20)
-#define NPCM7XX_IPSRST2 (0x24)
-#define NPCM7XX_IPSRST3 (0x34)
-#define NPCM7XX_WD0RCR (0x38)
-#define NPCM7XX_WD1RCR (0x3C)
-#define NPCM7XX_WD2RCR (0x40)
-#define NPCM7XX_SWRSTC1 (0x44)
-#define NPCM7XX_SWRSTC2 (0x48)
-#define NPCM7XX_SWRSTC3 (0x4C)
-#define NPCM7XX_SWRSTC4 (0x50)
-#define NPCM7XX_CORSTC (0x5C)
#define NPCM7XX_PLLCONG (0x60)
-#define NPCM7XX_AHBCKFI (0x64)
-#define NPCM7XX_SECCNT (0x68)
-#define NPCM7XX_CNTR25M (0x6C)
-
-struct npcm7xx_clk_gate_data {
- u32 reg;
- u8 bit_idx;
- const char *name;
- const char *parent_name;
- unsigned long flags;
- /*
- * If this clock is exported via DT, set onecell_idx to constant
- * defined in include/dt-bindings/clock/nuvoton, NPCM7XX-clock.h for
- * this specific clock. Otherwise, set to -1.
- */
- int onecell_idx;
-};
struct npcm7xx_clk_mux_data {
u8 shift;
@@ -160,21 +126,6 @@ struct npcm7xx_clk_mux_data {
};
-struct npcm7xx_clk_div_fixed_data {
- u8 mult;
- u8 div;
- const char *name;
- const char *parent_name;
- u8 clk_divider_flags;
- /*
- * If this clock is exported via DT, set onecell_idx to constant
- * defined in include/dt-bindings/clock/nuvoton, NPCM7XX-clock.h for
- * this specific clock. Otherwise, set to -1.
- */
- int onecell_idx;
-};
-
-
struct npcm7xx_clk_div_data {
u32 reg;
u8 shift;
@@ -361,13 +312,6 @@ static const struct npcm7xx_clk_mux_data npcm7xx_muxes[] __initconst = {
dvcssel_mux_parents, ARRAY_SIZE(dvcssel_mux_parents), 0, -1},
};
-/* fixed ratio dividers (no register): */
-static const struct npcm7xx_clk_div_fixed_data npcm7xx_divs_fx[] __initconst = {
- { 1, 2, NPCM7XX_CLK_S_MC, NPCM7XX_CLK_S_MC_MUX, 0, NPCM7XX_CLK_MC},
- { 1, 2, NPCM7XX_CLK_S_PLL1_DIV2, NPCM7XX_CLK_S_PLL1, 0, -1},
- { 1, 2, NPCM7XX_CLK_S_PLL2_DIV2, NPCM7XX_CLK_S_PLL2, 0, -1},
-};
-
/* configurable dividers: */
static const struct npcm7xx_clk_div_data npcm7xx_divs[] __initconst = {
{NPCM7XX_CLKDIV1, 28, 3, NPCM7XX_CLK_S_ADC,
@@ -435,107 +379,6 @@ static const struct npcm7xx_clk_div_data npcm7xx_divs[] __initconst = {
};
-static const struct npcm7xx_clk_gate_data npcm7xx_gates[] __initconst = {
- {NPCM7XX_CLKEN1, 31, "smb1-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 30, "smb0-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 29, "smb7-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 28, "smb6-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 27, "adc-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 26, "wdt-gate", NPCM7XX_CLK_S_TIMER, 0},
- {NPCM7XX_CLKEN1, 25, "usbdev3-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 24, "usbdev6-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 23, "usbdev5-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 22, "usbdev4-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 21, "emc2-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 20, "timer5_9-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 19, "timer0_4-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 18, "pwmm0-gate", NPCM7XX_CLK_S_APB3, 0},
- {NPCM7XX_CLKEN1, 17, "huart-gate", NPCM7XX_CLK_S_UART, 0},
- {NPCM7XX_CLKEN1, 16, "smb5-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 15, "smb4-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 14, "smb3-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 13, "smb2-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN1, 12, "mc-gate", NPCM7XX_CLK_S_MC, 0},
- {NPCM7XX_CLKEN1, 11, "uart01-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 10, "aes-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 9, "peci-gate", NPCM7XX_CLK_S_APB3, 0},
- {NPCM7XX_CLKEN1, 8, "usbdev2-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 7, "uart23-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 6, "emc1-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 5, "usbdev1-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 4, "shm-gate", NPCM7XX_CLK_S_AHB, 0},
- /* bit 3 is reserved */
- {NPCM7XX_CLKEN1, 2, "kcs-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN1, 1, "spi3-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN1, 0, "spi0-gate", NPCM7XX_CLK_S_AHB, 0},
-
- {NPCM7XX_CLKEN2, 31, "cp-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 30, "tock-gate", NPCM7XX_CLK_S_TOCK, 0},
- /* bit 29 is reserved */
- {NPCM7XX_CLKEN2, 28, "gmac1-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 27, "usbif-gate", NPCM7XX_CLK_S_USBIF, 0},
- {NPCM7XX_CLKEN2, 26, "usbhost-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 25, "gmac2-gate", NPCM7XX_CLK_S_AHB, 0},
- /* bit 24 is reserved */
- {NPCM7XX_CLKEN2, 23, "pspi2-gate", NPCM7XX_CLK_S_APB5, 0},
- {NPCM7XX_CLKEN2, 22, "pspi1-gate", NPCM7XX_CLK_S_APB5, 0},
- {NPCM7XX_CLKEN2, 21, "3des-gate", NPCM7XX_CLK_S_AHB, 0},
- /* bit 20 is reserved */
- {NPCM7XX_CLKEN2, 19, "siox2-gate", NPCM7XX_CLK_S_APB3, 0},
- {NPCM7XX_CLKEN2, 18, "siox1-gate", NPCM7XX_CLK_S_APB3, 0},
- /* bit 17 is reserved */
- {NPCM7XX_CLKEN2, 16, "fuse-gate", NPCM7XX_CLK_S_APB4, 0},
- /* bit 15 is reserved */
- {NPCM7XX_CLKEN2, 14, "vcd-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 13, "ece-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 12, "vdma-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 11, "ahbpcibrg-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 10, "gfxsys-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN2, 9, "sdhc-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 8, "mmc-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN2, 7, "mft7-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 6, "mft6-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 5, "mft5-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 4, "mft4-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 3, "mft3-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 2, "mft2-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 1, "mft1-gate", NPCM7XX_CLK_S_APB4, 0},
- {NPCM7XX_CLKEN2, 0, "mft0-gate", NPCM7XX_CLK_S_APB4, 0},
-
- {NPCM7XX_CLKEN3, 31, "gpiom7-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 30, "gpiom6-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 29, "gpiom5-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 28, "gpiom4-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 27, "gpiom3-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 26, "gpiom2-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 25, "gpiom1-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 24, "gpiom0-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 23, "espi-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 22, "smb11-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 21, "smb10-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 20, "smb9-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 19, "smb8-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 18, "smb15-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 17, "rng-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 16, "timer10_14-gate", NPCM7XX_CLK_S_APB1, 0},
- {NPCM7XX_CLKEN3, 15, "pcirc-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 14, "sececc-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 13, "sha-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 12, "smb14-gate", NPCM7XX_CLK_S_APB2, 0},
- /* bit 11 is reserved */
- /* bit 10 is reserved */
- {NPCM7XX_CLKEN3, 9, "pcimbx-gate", NPCM7XX_CLK_S_AHB, 0},
- /* bit 8 is reserved */
- {NPCM7XX_CLKEN3, 7, "usbdev9-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 6, "usbdev8-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 5, "usbdev7-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 4, "usbdev0-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 3, "smb13-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 2, "spix-gate", NPCM7XX_CLK_S_AHB, 0},
- {NPCM7XX_CLKEN3, 1, "smb12-gate", NPCM7XX_CLK_S_APB2, 0},
- {NPCM7XX_CLKEN3, 0, "pwmm1-gate", NPCM7XX_CLK_S_APB3, 0},
-};
-
static DEFINE_SPINLOCK(npcm7xx_clk_lock);
static void __init npcm7xx_clk_init(struct device_node *clk_np)
--
2.7.4
next reply other threads:[~2019-08-16 14:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 14:11 YueHaibing [this message]
2019-08-16 17:33 ` [PATCH -next] clk: npcm7xx: remove unused code Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816141132.55060-1-yuehaibing@huawei.com \
--to=yuehaibing@huawei.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=openbmc@lists.ozlabs.org \
--cc=sboyd@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).