From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <tony@atomide.com>,
<sre@kernel.org>, <nekit1000@gmail.com>, <mpartap@gmx.net>,
<merlijn@wizzup.org>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v3 2/5] leds: lm3532: Change the define for the fs current register
Date: Tue, 20 Aug 2019 14:53:04 -0500 [thread overview]
Message-ID: <20190820195307.27590-2-dmurphy@ti.com> (raw)
In-Reply-To: <20190820195307.27590-1-dmurphy@ti.com>
Change the define name of the full scale current registers.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v3 - New patch - https://lore.kernel.org/patchwork/patch/1114542/
drivers/leds/leds-lm3532.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 8132d05f7add..0c3d67671ab2 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -23,11 +23,11 @@
#define LM3532_REG_PWM_B_CFG 0x14
#define LM3532_REG_PWM_C_CFG 0x15
#define LM3532_REG_ZONE_CFG_A 0x16
-#define LM3532_REG_CTRL_A_BRT 0x17
+#define LM3532_REG_CTRL_A_FS_CURR 0x17
#define LM3532_REG_ZONE_CFG_B 0x18
-#define LM3532_REG_CTRL_B_BRT 0x19
+#define LM3532_REG_CTRL_B_FS_CURR 0x19
#define LM3532_REG_ZONE_CFG_C 0x1a
-#define LM3532_REG_CTRL_C_BRT 0x1b
+#define LM3532_REG_CTRL_C_FS_CURR 0x1b
#define LM3532_REG_ENABLE 0x1d
#define LM3532_ALS_CONFIG 0x23
#define LM3532_REG_ZN_0_HI 0x60
@@ -173,11 +173,11 @@ static const struct reg_default lm3532_reg_defs[] = {
{LM3532_REG_PWM_B_CFG, 0x82},
{LM3532_REG_PWM_C_CFG, 0x82},
{LM3532_REG_ZONE_CFG_A, 0xf1},
- {LM3532_REG_CTRL_A_BRT, 0xf3},
+ {LM3532_REG_CTRL_A_FS_CURR, 0xf3},
{LM3532_REG_ZONE_CFG_B, 0xf1},
- {LM3532_REG_CTRL_B_BRT, 0xf3},
+ {LM3532_REG_CTRL_B_FS_CURR, 0xf3},
{LM3532_REG_ZONE_CFG_C, 0xf1},
- {LM3532_REG_CTRL_C_BRT, 0xf3},
+ {LM3532_REG_CTRL_C_FS_CURR, 0xf3},
{LM3532_REG_ENABLE, 0xf8},
{LM3532_ALS_CONFIG, 0x44},
{LM3532_REG_ZN_0_HI, 0x35},
--
2.22.0.214.g8dca754b1e
next prev parent reply other threads:[~2019-08-20 19:53 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 19:53 [PATCH v3 1/5] leds: lm3532: Fix brightness control for i2c mode Dan Murphy
2019-08-20 19:53 ` Dan Murphy [this message]
2019-08-25 9:32 ` [PATCH v3 2/5] leds: lm3532: Change the define for the fs current register Pavel Machek
2019-08-27 21:33 ` Jacek Anaszewski
2019-08-27 21:37 ` Jacek Anaszewski
2019-08-20 19:53 ` [PATCH v3 3/5] leds: lm3532: Fixes for the driver for stability Dan Murphy
2019-08-20 19:53 ` [PATCH v3 4/5] dt: lm3532: Add property for full scale current Dan Murphy
2019-08-20 19:53 ` [PATCH v3 5/5] leds: lm3532: Add full scale current configuration Dan Murphy
2019-08-25 10:50 ` [PATCH v3 1/5] leds: lm3532: Fix brightness control for i2c mode Jacek Anaszewski
2019-08-26 21:58 ` Tony Lindgren
2019-08-26 22:14 ` Pavel Machek
2019-08-26 22:44 ` Tony Lindgren
2019-08-27 12:03 ` Dan Murphy
2019-08-27 12:18 ` Pavel Machek
2019-08-27 12:44 ` Dan Murphy
2019-08-27 13:01 ` Dan Murphy
2019-08-27 16:04 ` Tony Lindgren
2019-08-27 16:19 ` Dan Murphy
2019-08-27 16:45 ` Tony Lindgren
2019-08-27 21:14 ` Jacek Anaszewski
2019-08-28 15:28 ` Dan Murphy
2019-08-28 20:37 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820195307.27590-2-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=mpartap@gmx.net \
--cc=nekit1000@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).