From: Vivek Goyal <vgoyal@redhat.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-nvdimm@lists.01.org
Cc: virtio-fs@redhat.com, vgoyal@redhat.com, miklos@szeredi.hu,
stefanha@redhat.com, dgilbert@redhat.com
Subject: [PATCH 19/19] fuse: Take inode lock for dax inode truncation
Date: Wed, 21 Aug 2019 13:57:20 -0400 [thread overview]
Message-ID: <20190821175720.25901-20-vgoyal@redhat.com> (raw)
In-Reply-To: <20190821175720.25901-1-vgoyal@redhat.com>
When a file is opened with O_TRUNC, we need to make sure that any other
DAX operation is not in progress. DAX expects i_size to be stable.
In fuse_iomap_begin() we check for i_size at multiple places and we expect
i_size to not change.
Another problem is, if we setup a mapping in fuse_iomap_begin(), and
file gets truncated and dax read/write happens, KVM currently hangs.
It tries to fault in a page which does not exist on host (file got
truncated). It probably requries fixing in KVM.
So for now, take inode lock. Once KVM is fixed, we might have to
have a look at it again.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
fs/fuse/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index e369a1f92d85..794c55131bd0 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -524,7 +524,7 @@ int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
int err;
bool lock_inode = (file->f_flags & O_TRUNC) &&
fc->atomic_o_trunc &&
- fc->writeback_cache;
+ (fc->writeback_cache || IS_DAX(inode));
err = generic_file_open(inode, file);
if (err)
--
2.20.1
prev parent reply other threads:[~2019-08-21 17:57 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 17:57 [PATCH v3 00/19][RFC] virtio-fs: Enable DAX support Vivek Goyal
2019-08-21 17:57 ` [PATCH 01/19] dax: remove block device dependencies Vivek Goyal
2019-08-26 11:51 ` Christoph Hellwig
2019-08-27 16:38 ` Vivek Goyal
2019-08-28 6:58 ` Christoph Hellwig
2019-08-28 17:58 ` Vivek Goyal
2019-08-28 22:53 ` Dave Chinner
2019-08-29 0:04 ` Dan Williams
2019-08-29 9:32 ` Christoph Hellwig
2019-12-16 18:10 ` Vivek Goyal
2020-01-07 12:51 ` Christoph Hellwig
2020-01-07 14:22 ` Dan Williams
2020-01-07 17:07 ` Darrick J. Wong
2020-01-07 17:29 ` Dan Williams
2020-01-07 18:01 ` Vivek Goyal
2020-01-07 18:07 ` Dan Williams
2020-01-07 18:33 ` Vivek Goyal
2020-01-07 18:49 ` Dan Williams
2020-01-07 19:02 ` Darrick J. Wong
2020-01-07 19:46 ` Dan Williams
2020-01-07 23:38 ` Dan Williams
2020-01-09 11:24 ` Jan Kara
2020-01-09 20:03 ` Dan Williams
2020-01-10 12:36 ` Christoph Hellwig
2020-01-14 20:31 ` Vivek Goyal
2020-01-14 20:39 ` Dan Williams
2020-01-14 21:28 ` Vivek Goyal
2020-01-14 22:23 ` Dan Williams
2020-01-15 19:56 ` Vivek Goyal
2020-01-15 20:17 ` Dan Williams
2020-01-15 21:08 ` Jeff Moyer
2020-01-16 18:09 ` Dan Williams
2020-01-16 18:39 ` Vivek Goyal
2020-01-16 19:09 ` Dan Williams
2020-01-16 19:23 ` Vivek Goyal
2020-02-11 17:33 ` Vivek Goyal
2020-01-15 9:03 ` Jan Kara
2019-08-21 17:57 ` [PATCH 02/19] dax: Pass dax_dev to dax_writeback_mapping_range() Vivek Goyal
2019-08-26 11:53 ` Christoph Hellwig
2019-08-26 20:33 ` Vivek Goyal
2019-08-26 20:58 ` Vivek Goyal
2019-08-26 21:33 ` Dan Williams
2019-08-28 6:58 ` Christoph Hellwig
2020-01-03 14:12 ` Vivek Goyal
2020-01-03 18:12 ` Dan Williams
2020-01-03 18:18 ` Dan Williams
2020-01-03 18:33 ` Vivek Goyal
2020-01-03 19:30 ` Dan Williams
2020-01-03 18:43 ` Vivek Goyal
2019-08-27 13:45 ` Jan Kara
2019-08-21 17:57 ` [PATCH 03/19] virtio: Add get_shm_region method Vivek Goyal
2019-08-21 17:57 ` [PATCH 04/19] virtio: Implement get_shm_region for PCI transport Vivek Goyal
2019-08-26 1:43 ` [Virtio-fs] " piaojun
2019-08-26 13:06 ` Vivek Goyal
2019-08-27 9:41 ` piaojun
2019-08-27 8:34 ` Cornelia Huck
2019-08-27 8:46 ` Cornelia Huck
2019-08-27 11:53 ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 05/19] virtio: Implement get_shm_region for MMIO transport Vivek Goyal
2019-08-27 8:39 ` Cornelia Huck
2019-08-27 11:54 ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 06/19] fuse, dax: add fuse_conn->dax_dev field Vivek Goyal
2019-08-21 17:57 ` [PATCH 07/19] virtio_fs, dax: Set up virtio_fs dax_device Vivek Goyal
2019-08-21 17:57 ` [PATCH 08/19] fuse: Keep a list of free dax memory ranges Vivek Goyal
2019-08-21 17:57 ` [PATCH 09/19] fuse: implement FUSE_INIT map_alignment field Vivek Goyal
2019-08-21 17:57 ` [PATCH 10/19] fuse: Introduce setupmapping/removemapping commands Vivek Goyal
2019-08-21 17:57 ` [PATCH 11/19] fuse, dax: Implement dax read/write operations Vivek Goyal
2019-08-21 19:49 ` Liu Bo
2019-08-22 12:59 ` Vivek Goyal
2019-08-21 17:57 ` [PATCH 12/19] fuse, dax: add DAX mmap support Vivek Goyal
2019-08-21 17:57 ` [PATCH 13/19] fuse: Define dax address space operations Vivek Goyal
2019-08-21 17:57 ` [PATCH 14/19] fuse, dax: Take ->i_mmap_sem lock during dax page fault Vivek Goyal
2019-08-21 17:57 ` [PATCH 15/19] fuse: Maintain a list of busy elements Vivek Goyal
2019-08-21 17:57 ` [PATCH 16/19] dax: Create a range version of dax_layout_busy_page() Vivek Goyal
2019-08-21 17:57 ` [PATCH 17/19] fuse: Add logic to free up a memory range Vivek Goyal
2019-08-21 17:57 ` [PATCH 18/19] fuse: Release file in process context Vivek Goyal
2019-08-21 17:57 ` Vivek Goyal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821175720.25901-20-vgoyal@redhat.com \
--to=vgoyal@redhat.com \
--cc=dgilbert@redhat.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=miklos@szeredi.hu \
--cc=stefanha@redhat.com \
--cc=virtio-fs@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).