[PATCH V8 1/3] mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name

From: "Shirley Her (SC)" <shirley.her@bayhubtech.com>
To: "adrian.hunter@intel.com" <adrian.hunter@intel.com>,
	"ulf.hansson@linaro.org" <ulf.hansson@linaro.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "Chevron Li (WH)" <chevron.li@bayhubtech.com>,
	"Shaper Liu (WH)" <shaper.liu@bayhubtech.com>,
	"Louis Lu (TP)" <louis.lu@bayhubtech.com>,
	"Max Huang (SC)" <max.huang@bayhubtech.com>,
	"Shirley Her (SC)" <shirley.her@bayhubtech.com>
Subject: [PATCH V8 1/3] mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name
Date: Wed, 21 Aug 2019 18:38:30 +0000	[thread overview]
Message-ID: <1566412708-6130-1-git-send-email-shirley.her@bayhubtech.com> (raw)

Change O2 Host PLL and DLL register name

Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
---
change in V8:
 1. fix patch format error

change in V7:
 1. change subject

change in V6:
 1. change subject and commit message to match the patch
 2. change register name O2_PLL_WDT_CONTROL1 to O2_PLL_DLL_WDT_CONTROL1

change in V5:
 1. split 2 patches into 3 patches
 2. make dll_adjust_count start from 0
 3. fix ret overwritten issue
 4. use break instead of goto

change in V4:
 1. add a bug fix for V3

change in V3:
 1. add more explanation in dll_recovery and execute_tuning function
 2. move dll_adjust_count to O2_host struct
 3. fix some coding style error
 4. renaming O2_PLL_WDT_CONTROL1 TO O2_PLL_DLL_WDT_CONTROL1

change in V2:
 1. use usleep_range instead of udelay
 2. move dll_adjust_count to sdhci-pci-o2micro.c

chagne in V1:
 1. add error recovery function to relock DLL with correct phase
 2. retuning HS200 after DLL locked
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 9dc4548..b3a33d9 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -51,7 +51,7 @@
 #define O2_SD_VENDOR_SETTING2	0x1C8
 #define O2_SD_HW_TUNING_DISABLE	BIT(4)
 
-#define O2_PLL_WDT_CONTROL1	0x1CC
+#define O2_PLL_DLL_WDT_CONTROL1	0x1CC
 #define  O2_PLL_FORCE_ACTIVE	BIT(18)
 #define  O2_PLL_LOCK_STATUS	BIT(14)
 #define  O2_PLL_SOFT_RESET	BIT(12)
@@ -316,23 +316,23 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
 	u32 scratch32;
 
 	/* PLL software reset */
-	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
+	scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
 	scratch32 |= O2_PLL_SOFT_RESET;
-	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
 	udelay(1);
 	scratch32 &= ~(O2_PLL_SOFT_RESET);
-	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
 
 	/* PLL force active */
 	scratch32 |= O2_PLL_FORCE_ACTIVE;
-	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
 
 	/* Wait max 20 ms */
 	timeout = ktime_add_ms(ktime_get(), 20);
 	while (1) {
 		bool timedout = ktime_after(ktime_get(), timeout);
 
-		scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
+		scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
 		if (scratch & O2_PLL_LOCK_STATUS)
 			break;
 		if (timedout) {
@@ -350,9 +350,9 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
 
 out:
 	/* Cancel PLL force active */
-	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
+	scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
 	scratch32 &= ~O2_PLL_FORCE_ACTIVE;
-	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
+	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
 }
 
 static int sdhci_o2_get_cd(struct mmc_host *mmc)
-- 
2.7.4

