From: <qii.wang@mediatek.com>
To: <robh+dt@kernel.org>
Cc: <matthias.bgg@gmail.com>, <mark.rutland@arm.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
<qii.wang@mediatek.com>
Subject: [PATCH] arm64: dts: mt8183: add I2C nodes
Date: Thu, 22 Aug 2019 20:35:16 +0800 [thread overview]
Message-ID: <1566477316-13245-1-git-send-email-qii.wang@mediatek.com> (raw)
From: Qii Wang <qii.wang@mediatek.com>
Add i2c nodes to mt8183 and mt8183-evb.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 96 ++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 189 ++++++++++++++++++++++++++++
2 files changed, 285 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index d8e555c..1fb195c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -30,7 +30,103 @@
status = "okay";
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_0>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_1>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_2>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_3>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_4>;
+ status = "okay";
+ clock-frequency = <1000000>;
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_5>;
+ status = "okay";
+ clock-frequency = <1000000>;
+};
+
&pio {
+ i2c_pins_0: i2c0{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+ <PINMUX_GPIO83__FUNC_SCL0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
+ i2c_pins_1: i2c1{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+ <PINMUX_GPIO84__FUNC_SCL1>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
+ i2c_pins_2: i2c2{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+ <PINMUX_GPIO104__FUNC_SDA2>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
+ i2c_pins_3: i2c3{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+ <PINMUX_GPIO51__FUNC_SDA3>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
+ i2c_pins_4: i2c4{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+ <PINMUX_GPIO106__FUNC_SDA4>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
+ i2c_pins_5: i2c5{
+ pins_i2c{
+ pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+ <PINMUX_GPIO49__FUNC_SDA5>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ };
+ };
+
spi_pins_0: spi0{
pins_spi{
pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c2749c4..ab71291 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -16,6 +16,21 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -294,6 +309,64 @@
status = "disabled";
};
+ i2c6: i2c@11005000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11005000 0 0x1000>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C6>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11007000 0 0x1000>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C0>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11008000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11008000 0 0x1000>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma","arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11009000 0 0x1000>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi0: spi@1100a000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -307,6 +380,20 @@
status = "disabled";
};
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1100f000 0 0x1000>,
+ <0 0x11000400 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C3>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -320,6 +407,20 @@
status = "disabled";
};
+ i2c1: i2c@11011000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11011000 0 0x1000>,
+ <0 0x11000480 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C4>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi2: spi@11012000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -346,6 +447,66 @@
status = "disabled";
};
+ i2c9: i2c@11014000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11014000 0 0x1000>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C1_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@11015000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11015000 0 0x1000>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C2_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11016000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11016000 0 0x1000>,
+ <0 0x11000500 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@11017000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x11017000 0 0x1000>,
+ <0 0x11000580 0 0x80>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+ <&infracfg CLK_INFRA_AP_DMA>,
+ <&infracfg CLK_INFRA_I2C5_ARBITER>;
+ clock-names = "main", "dma", "arb";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi4: spi@11018000 {
compatible = "mediatek,mt8183-spi";
#address-cells = <1>;
@@ -372,6 +533,34 @@
status = "disabled";
};
+ i2c7: i2c@1101a000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101a000 0 0x1000>,
+ <0 0x11000680 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C7>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@1101b000 {
+ compatible = "mediatek,mt8183-i2c";
+ reg = <0 0x1101b000 0 0x1000>,
+ <0 0x11000700 0 0x80>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_I2C8>,
+ <&infracfg CLK_INFRA_AP_DMA>;
+ clock-names = "main", "dma";
+ clock-div = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
1.9.1
next reply other threads:[~2019-08-22 12:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-22 12:35 qii.wang [this message]
2019-08-22 13:21 ` [PATCH] arm64: dts: mt8183: add I2C nodes Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566477316-13245-1-git-send-email-qii.wang@mediatek.com \
--to=qii.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=leilk.liu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).