From: Fancy Fang <chen.fang@nxp.com>
To: "mturquette@baylibre.com" <mturquette@baylibre.com>,
"sboyd@kernel.org" <sboyd@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
Abel Vesa <abel.vesa@nxp.com>,
"kernel@pengutronix.de" <kernel@pengutronix.de>
Cc: LnxRevLi <LnxRevLi@nxp.com>, Jana Build <jana.build@nxp.com>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Anson Huang <anson.huang@nxp.com>,
Aisheng Dong <aisheng.dong@nxp.com>,
"festevam@gmail.com" <festevam@gmail.com>,
dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH 1/2] ARM: dts: imx7ulp: remove mipi pll clock node
Date: Fri, 23 Aug 2019 00:37:30 +0000 [thread overview]
Message-ID: <20190823003600.8317-1-chen.fang@nxp.com> (raw)
According to the IMX7ULP reference manual, the mipi pll
clock comes from the MIPI PHY PLL output. So it should
not be defined as a fixed clock. So remove this clock
node and all the references to it.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
---
arch/arm/boot/dts/imx7ulp.dtsi | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 6859a3a83750..a7e4004bf428 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -87,13 +87,6 @@
#clock-cells = <0>;
};
- mpll: clock-mpll {
- compatible = "fixed-clock";
- clock-frequency = <480000000>;
- clock-output-names = "mpll";
- #clock-cells = <0>;
- };
-
ahbbridge0: bus@40000000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -258,9 +251,9 @@
compatible = "fsl,imx7ulp-scg1";
reg = <0x403e0000 0x10000>;
clocks = <&rosc>, <&sosc>, <&sirc>,
- <&firc>, <&upll>, <&mpll>;
+ <&firc>, <&upll>;
clock-names = "rosc", "sosc", "sirc",
- "firc", "upll", "mpll";
+ "firc", "upll";
#clock-cells = <1>;
};
@@ -276,13 +269,12 @@
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
<&scg1 IMX7ULP_CLK_UPLL>,
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
- <&scg1 IMX7ULP_CLK_MIPI_PLL>,
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_ROSC>,
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
"apll_pfd2", "apll_pfd1", "apll_pfd0",
- "upll", "sosc_bus_clk", "mpll",
+ "upll", "sosc_bus_clk",
"firc_bus_clk", "rosc", "spll_bus_clk";
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
@@ -309,13 +301,12 @@
<&scg1 IMX7ULP_CLK_APLL_PFD0>,
<&scg1 IMX7ULP_CLK_UPLL>,
<&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
- <&scg1 IMX7ULP_CLK_MIPI_PLL>,
<&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
<&scg1 IMX7ULP_CLK_ROSC>,
<&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
"apll_pfd2", "apll_pfd1", "apll_pfd0",
- "upll", "sosc_bus_clk", "mpll",
+ "upll", "sosc_bus_clk",
"firc_bus_clk", "rosc", "spll_bus_clk";
};
};
--
2.17.1
next reply other threads:[~2019-08-23 0:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 0:37 Fancy Fang [this message]
2019-08-23 0:37 ` [PATCH 2/2] clk: imx7ulp: remove IMX7ULP_CLK_MIPI_PLL clock Fancy Fang
2019-09-11 6:45 ` Shawn Guo
2019-09-11 6:42 ` [PATCH 1/2] ARM: dts: imx7ulp: remove mipi pll clock node Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190823003600.8317-1-chen.fang@nxp.com \
--to=chen.fang@nxp.com \
--cc=LnxRevLi@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=anson.huang@nxp.com \
--cc=festevam@gmail.com \
--cc=jana.build@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).