From: Robin van der Gracht <robin@protonic.nl>
To: Robin van der Gracht <robin@protonic.nl>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Robin Gong <yibin.gong@nxp.com>, Adam Ford <aford173@gmail.com>
Subject: [PATCH] input: keyboard: snvs_pwrkey: Send press and release event for i.MX6 S,DL and Q
Date: Fri, 23 Aug 2019 14:30:02 +0200 [thread overview]
Message-ID: <20190823123002.10448-1-robin@protonic.nl> (raw)
The older generation i.MX6 processors send a powerdown request interrupt if
the powerkey is released before a hard shutdown (5 second press). This should
allow software to bring down the SoC safely.
For this driver to work as a regular powerkey with the older SoCs, we need to
send a keypress AND release when we get the powerdown request interrupt.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---
arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
arch/arm/boot/dts/imx6sll.dtsi | 2 +-
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
arch/arm/boot/dts/imx7s.dtsi | 2 +-
drivers/input/keyboard/Kconfig | 2 +-
drivers/input/keyboard/snvs_pwrkey.c | 59 +++++++++++++++++++++++-----
7 files changed, 56 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bcf00d51..c10d12658743c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -836,7 +836,7 @@
};
snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
+ compatible = "fsl,imx6qdl-sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f0fcded..91c7d5bdcc359 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -571,7 +571,7 @@
};
snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
+ compatible = "fsl,imx6sx-sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index b16a123990a26..b6736db65350f 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -733,7 +733,7 @@
};
snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
+ compatible = "fsl,imx6sx-sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index a7f6d1d58e20d..d4678c52b55db 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -644,7 +644,7 @@
};
snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
+ compatible = "fsl,imx6sx-sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 106711d2c01b0..bb68c23beb199 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -604,7 +604,7 @@
};
snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
+ compatible = "fsl,imx6sx-sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f19dab34fd..937e58da5ce17 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
depends on OF
help
This is the snvs powerkey driver for the Freescale i.MX application
- processors that are newer than i.MX6 SX.
+ processors.
To compile this driver as a module, choose M here; the
module will be called snvs_pwrkey.
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 5342d8d45f811..c321e5f2d1087 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -29,6 +29,11 @@
#define DEBOUNCE_TIME 30
#define REPEAT_INTERVAL 60
+enum imx_snvs_hwtype {
+ IMX6SX_SNVS, /* i.MX6 SoloX and newer */
+ IMX6QDL_SNVS, /* i.MX6 Solo, DualLite adn Quad */
+};
+
struct pwrkey_drv_data {
struct regmap *snvs;
int irq;
@@ -37,6 +42,19 @@ struct pwrkey_drv_data {
int wakeup;
struct timer_list check_timer;
struct input_dev *input;
+ enum imx_snvs_hwtype hwtype;
+};
+
+static const struct platform_device_id imx_snvs_devtype[] = {
+ {
+ .name = "imx6sx-snvs-pwrkey",
+ .driver_data = IMX6SX_SNVS,
+ }, {
+ .name = "imx6qdl-snvs-pwrkey",
+ .driver_data = IMX6QDL_SNVS,
+ }, {
+ /* sentinel */
+ }
};
static void imx_imx_snvs_check_for_events(struct timer_list *t)
@@ -67,13 +85,23 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+ struct input_dev *input = pdata->input;
u32 lp_status;
- pm_wakeup_event(pdata->input->dev.parent, 0);
+ pm_wakeup_event(input->dev.parent, 0);
regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
- if (lp_status & SNVS_LPSR_SPO)
- mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+ if (lp_status & SNVS_LPSR_SPO) {
+ if (pdata->hwtype == IMX6QDL_SNVS) {
+ input_report_key(input, pdata->keycode, 1);
+ input_report_key(input, pdata->keycode, 0);
+ input_sync(input);
+ pm_relax(input->dev.parent);
+ } else {
+ mod_timer(&pdata->check_timer,
+ jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+ }
+ }
/* clear SPO status */
regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
@@ -88,11 +116,24 @@ static void imx_snvs_pwrkey_act(void *pdata)
del_timer_sync(&pd->check_timer);
}
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+ {
+ .compatible = "fsl,imx6sx-sec-v4.0-pwrkey",
+ .data = &imx_snvs_devtype[IMX6SX_SNVS],
+ }, {
+ .compatible = "fsl,imx6qdl-sec-v4.0-pwrkey",
+ .data = &imx_snvs_devtype[IMX6QDL_SNVS],
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
{
struct pwrkey_drv_data *pdata = NULL;
struct input_dev *input = NULL;
struct device_node *np;
+ const struct of_device_id *of_id;
int error;
/* Get SNVS register Page */
@@ -100,6 +141,11 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
if (!np)
return -ENODEV;
+ of_id = of_match_node(imx_snvs_pwrkey_ids, np);
+ if (!of_id)
+ return -ENODEV;
+ pdev->id_entry = of_id->data;
+
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
@@ -116,6 +162,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
}
pdata->wakeup = of_property_read_bool(np, "wakeup-source");
+ pdata->hwtype = pdev->id_entry->driver_data;
pdata->irq = platform_get_irq(pdev, 0);
if (pdata->irq < 0) {
@@ -175,12 +222,6 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id imx_snvs_pwrkey_ids[] = {
- { .compatible = "fsl,sec-v4.0-pwrkey" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
-
static struct platform_driver imx_snvs_pwrkey_driver = {
.driver = {
.name = "snvs_pwrkey",
--
2.20.1
next reply other threads:[~2019-08-23 12:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 12:30 Robin van der Gracht [this message]
2019-08-25 7:10 ` [PATCH] input: keyboard: snvs_pwrkey: Send press and release event for i.MX6 S,DL and Q Shawn Guo
2019-08-27 6:17 ` Robin Gong
2019-08-27 7:55 ` robin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190823123002.10448-1-robin@protonic.nl \
--to=robin@protonic.nl \
--cc=aford173@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).