linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <marek.vasut@gmail.com>, <vigneshr@ti.com>,
	<boris.brezillon@collabora.com>, <miquel.raynal@bootlin.com>,
	<richard@nod.at>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <Tudor.Ambarus@microchip.com>
Subject: [PATCH 1/5] mtd: spi-nor: Regroup flash parameter and settings
Date: Fri, 23 Aug 2019 15:53:35 +0000	[thread overview]
Message-ID: <20190823155325.13459-2-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190823155325.13459-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

The scope is to move all [FLASH-SPECIFIC] parameters and settings
from 'struct spi_nor' to 'struct spi_nor_flash_parameter'.

'struct spi_nor_flash_parameter' describes the hardware capabilities
and associated settings of the SPI NOR flash memory. It includes
legacy flash parameters and settings that can be overwritten by the
spi_nor_fixups hooks, or dynamically when parsing the JESD216
Serial Flash Discoverable Parameters (SFDP) tables. All SFDP params
and settings will fit inside 'struct spi_nor_flash_parameter'.

Move spi_nor_hwcaps related code to avoid forward declarations.
Add a forward declaration that we can't avoid: 'struct spi_nor' will
be used in 'struct spi_nor_flash_parameter'.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spi-nor.c |  65 ------------
 include/linux/mtd/spi-nor.h   | 239 +++++++++++++++++++++++++++++-------------
 2 files changed, 164 insertions(+), 140 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 0597cb8257b0..d35dc6a97521 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -40,71 +40,6 @@
 #define SPI_NOR_MAX_ID_LEN	6
 #define SPI_NOR_MAX_ADDR_WIDTH	4
 
-struct spi_nor_read_command {
-	u8			num_mode_clocks;
-	u8			num_wait_states;
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-struct spi_nor_pp_command {
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-enum spi_nor_read_command_index {
-	SNOR_CMD_READ,
-	SNOR_CMD_READ_FAST,
-	SNOR_CMD_READ_1_1_1_DTR,
-
-	/* Dual SPI */
-	SNOR_CMD_READ_1_1_2,
-	SNOR_CMD_READ_1_2_2,
-	SNOR_CMD_READ_2_2_2,
-	SNOR_CMD_READ_1_2_2_DTR,
-
-	/* Quad SPI */
-	SNOR_CMD_READ_1_1_4,
-	SNOR_CMD_READ_1_4_4,
-	SNOR_CMD_READ_4_4_4,
-	SNOR_CMD_READ_1_4_4_DTR,
-
-	/* Octal SPI */
-	SNOR_CMD_READ_1_1_8,
-	SNOR_CMD_READ_1_8_8,
-	SNOR_CMD_READ_8_8_8,
-	SNOR_CMD_READ_1_8_8_DTR,
-
-	SNOR_CMD_READ_MAX
-};
-
-enum spi_nor_pp_command_index {
-	SNOR_CMD_PP,
-
-	/* Quad SPI */
-	SNOR_CMD_PP_1_1_4,
-	SNOR_CMD_PP_1_4_4,
-	SNOR_CMD_PP_4_4_4,
-
-	/* Octal SPI */
-	SNOR_CMD_PP_1_1_8,
-	SNOR_CMD_PP_1_8_8,
-	SNOR_CMD_PP_8_8_8,
-
-	SNOR_CMD_PP_MAX
-};
-
-struct spi_nor_flash_parameter {
-	u64				size;
-	u32				page_size;
-
-	struct spi_nor_hwcaps		hwcaps;
-	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
-	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
-
-	int (*quad_enable)(struct spi_nor *nor);
-};
-
 struct sfdp_parameter_header {
 	u8		id_lsb;
 	u8		minor;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 3075ac73b171..77ba692d9348 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -334,6 +334,165 @@ struct spi_nor_erase_map {
 };
 
 /**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask:		the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+	u32	mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octal SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK		GENMASK(14, 0)
+#define SNOR_HWCAPS_READ		BIT(0)
+#define SNOR_HWCAPS_READ_FAST		BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR	BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL		GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2		BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2		BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2		BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR	BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD		GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4		BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4		BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4		BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR	BIT(10)
+
+#define SNOR_HWCAPS_READ_OCTAL		GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8		BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8		BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8		BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR	BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK	GENMASK(22, 16)
+#define SNOR_HWCAPS_PP		BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD	GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4	BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4	BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4	BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTAL	GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8	BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8	BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8	BIT(22)
+
+#define SNOR_HWCAPS_X_X_X	(SNOR_HWCAPS_READ_2_2_2 |	\
+				 SNOR_HWCAPS_READ_4_4_4 |	\
+				 SNOR_HWCAPS_READ_8_8_8 |	\
+				 SNOR_HWCAPS_PP_4_4_4 |		\
+				 SNOR_HWCAPS_PP_8_8_8)
+
+#define SNOR_HWCAPS_DTR		(SNOR_HWCAPS_READ_1_1_1_DTR |	\
+				 SNOR_HWCAPS_READ_1_2_2_DTR |	\
+				 SNOR_HWCAPS_READ_1_4_4_DTR |	\
+				 SNOR_HWCAPS_READ_1_8_8_DTR)
+
+#define SNOR_HWCAPS_ALL		(SNOR_HWCAPS_READ_MASK |	\
+				 SNOR_HWCAPS_PP_MASK)
+
+struct spi_nor_read_command {
+	u8			num_mode_clocks;
+	u8			num_wait_states;
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+struct spi_nor_pp_command {
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+enum spi_nor_read_command_index {
+	SNOR_CMD_READ,
+	SNOR_CMD_READ_FAST,
+	SNOR_CMD_READ_1_1_1_DTR,
+
+	/* Dual SPI */
+	SNOR_CMD_READ_1_1_2,
+	SNOR_CMD_READ_1_2_2,
+	SNOR_CMD_READ_2_2_2,
+	SNOR_CMD_READ_1_2_2_DTR,
+
+	/* Quad SPI */
+	SNOR_CMD_READ_1_1_4,
+	SNOR_CMD_READ_1_4_4,
+	SNOR_CMD_READ_4_4_4,
+	SNOR_CMD_READ_1_4_4_DTR,
+
+	/* Octal SPI */
+	SNOR_CMD_READ_1_1_8,
+	SNOR_CMD_READ_1_8_8,
+	SNOR_CMD_READ_8_8_8,
+	SNOR_CMD_READ_1_8_8_DTR,
+
+	SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+	SNOR_CMD_PP,
+
+	/* Quad SPI */
+	SNOR_CMD_PP_1_1_4,
+	SNOR_CMD_PP_1_4_4,
+	SNOR_CMD_PP_4_4_4,
+
+	/* Octal SPI */
+	SNOR_CMD_PP_1_1_8,
+	SNOR_CMD_PP_1_8_8,
+	SNOR_CMD_PP_8_8_8,
+
+	SNOR_CMD_PP_MAX
+};
+
+/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
+struct spi_nor;
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @size:		the flash memory density in bytes.
+ * @page_size:		the page size of the SPI NOR flash memory.
+ * @hwcaps:		describes the read and page program hardware
+ *			capabilities.
+ * @reads:		read capabilities ordered by priority: the higher index
+ *                      in the array, the higher priority.
+ * @page_programs:	page program capabilities ordered by priority: the
+ *                      higher index in the array, the higher priority.
+ * @quad_enable:	enables SPI NOR quad mode.
+ */
+struct spi_nor_flash_parameter {
+	u64				size;
+	u32				page_size;
+
+	struct spi_nor_hwcaps		hwcaps;
+	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
+	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
+
+	int (*quad_enable)(struct spi_nor *nor);
+};
+
+/**
  * struct flash_info - Forward declaration of a structure used internally by
  *		       spi_nor_scan()
  */
@@ -379,6 +538,10 @@ struct flash_info;
  * @quad_enable:	[FLASH-SPECIFIC] enables SPI NOR quad mode
  * @clear_sr_bp:	[FLASH-SPECIFIC] clears the Block Protection Bits from
  *			the SPI NOR Status Register.
+ * @params:		[FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
+ *                      The structure includes legacy flash parameters and
+ *                      settings that can be overwritten by the spi_nor_fixups
+ *                      hooks, or dynamically when parsing the SFDP tables.
  * @priv:		the private data
  */
 struct spi_nor {
@@ -418,6 +581,7 @@ struct spi_nor {
 	int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 	int (*quad_enable)(struct spi_nor *nor);
 	int (*clear_sr_bp)(struct spi_nor *nor);
+	struct spi_nor_flash_parameter params;
 
 	void *priv;
 };
@@ -463,81 +627,6 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
 }
 
 /**
- * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
- * supported by the SPI controller (bus master).
- * @mask:		the bitmask listing all the supported hw capabilies
- */
-struct spi_nor_hwcaps {
-	u32	mask;
-};
-
-/*
- *(Fast) Read capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * As a matter of performances, it is relevant to use Octal SPI protocols first,
- * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
- * (Slow) Read.
- */
-#define SNOR_HWCAPS_READ_MASK		GENMASK(14, 0)
-#define SNOR_HWCAPS_READ		BIT(0)
-#define SNOR_HWCAPS_READ_FAST		BIT(1)
-#define SNOR_HWCAPS_READ_1_1_1_DTR	BIT(2)
-
-#define SNOR_HWCAPS_READ_DUAL		GENMASK(6, 3)
-#define SNOR_HWCAPS_READ_1_1_2		BIT(3)
-#define SNOR_HWCAPS_READ_1_2_2		BIT(4)
-#define SNOR_HWCAPS_READ_2_2_2		BIT(5)
-#define SNOR_HWCAPS_READ_1_2_2_DTR	BIT(6)
-
-#define SNOR_HWCAPS_READ_QUAD		GENMASK(10, 7)
-#define SNOR_HWCAPS_READ_1_1_4		BIT(7)
-#define SNOR_HWCAPS_READ_1_4_4		BIT(8)
-#define SNOR_HWCAPS_READ_4_4_4		BIT(9)
-#define SNOR_HWCAPS_READ_1_4_4_DTR	BIT(10)
-
-#define SNOR_HWCAPS_READ_OCTAL		GENMASK(14, 11)
-#define SNOR_HWCAPS_READ_1_1_8		BIT(11)
-#define SNOR_HWCAPS_READ_1_8_8		BIT(12)
-#define SNOR_HWCAPS_READ_8_8_8		BIT(13)
-#define SNOR_HWCAPS_READ_1_8_8_DTR	BIT(14)
-
-/*
- * Page Program capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
- * legacy SPI 1-1-1 protocol.
- * Note that Dual Page Programs are not supported because there is no existing
- * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
- * implements such commands.
- */
-#define SNOR_HWCAPS_PP_MASK	GENMASK(22, 16)
-#define SNOR_HWCAPS_PP		BIT(16)
-
-#define SNOR_HWCAPS_PP_QUAD	GENMASK(19, 17)
-#define SNOR_HWCAPS_PP_1_1_4	BIT(17)
-#define SNOR_HWCAPS_PP_1_4_4	BIT(18)
-#define SNOR_HWCAPS_PP_4_4_4	BIT(19)
-
-#define SNOR_HWCAPS_PP_OCTAL	GENMASK(22, 20)
-#define SNOR_HWCAPS_PP_1_1_8	BIT(20)
-#define SNOR_HWCAPS_PP_1_8_8	BIT(21)
-#define SNOR_HWCAPS_PP_8_8_8	BIT(22)
-
-#define SNOR_HWCAPS_X_X_X	(SNOR_HWCAPS_READ_2_2_2 |	\
-				 SNOR_HWCAPS_READ_4_4_4 |	\
-				 SNOR_HWCAPS_READ_8_8_8 |	\
-				 SNOR_HWCAPS_PP_4_4_4 |		\
-				 SNOR_HWCAPS_PP_8_8_8)
-
-#define SNOR_HWCAPS_DTR		(SNOR_HWCAPS_READ_1_1_1_DTR |	\
-				 SNOR_HWCAPS_READ_1_2_2_DTR |	\
-				 SNOR_HWCAPS_READ_1_4_4_DTR |	\
-				 SNOR_HWCAPS_READ_1_8_8_DTR)
-
-#define SNOR_HWCAPS_ALL		(SNOR_HWCAPS_READ_MASK |	\
-				 SNOR_HWCAPS_PP_MASK)
-
-/**
  * spi_nor_scan() - scan the SPI NOR
  * @nor:	the spi_nor structure
  * @name:	the chip type name
-- 
2.9.5


  reply	other threads:[~2019-08-23 15:53 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 15:53 [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Tudor.Ambarus
2019-08-23 15:53 ` Tudor.Ambarus [this message]
2019-08-25 11:32   ` [PATCH 1/5] mtd: spi-nor: Regroup flash parameter and settings Boris Brezillon
2019-08-23 15:53 ` [PATCH 2/5] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-25 11:31   ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 3/5] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-25 11:32   ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 4/5] mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-24  3:53   ` Tudor.Ambarus
2019-08-25 11:33   ` Boris Brezillon
2019-08-25 13:09   ` Boris Brezillon
2019-08-25 13:19     ` Tudor.Ambarus
2019-08-25 13:28       ` Boris Brezillon
2019-08-23 15:53 ` [PATCH 5/5] mtd: spi-nor: Move erase_map " Tudor.Ambarus
2019-08-25 11:34   ` Boris Brezillon
2019-08-25 11:38 ` [PATCH 0/5] mtd: spi-nor: move manuf out of the core - batch 0 Boris Brezillon
2019-08-25 13:02   ` Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823155325.13459-2-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).