linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <marek.vasut@gmail.com>,
	<vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: <boris.brezillon@bootlin.com>, <Tudor.Ambarus@microchip.com>
Subject: [PATCH v2 5/7] mtd: spi-nor: Create a ->set_4byte() method
Date: Sat, 24 Aug 2019 12:00:45 +0000	[thread overview]
Message-ID: <20190824120027.14452-6-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190824120027.14452-1-tudor.ambarus@microchip.com>

From: Boris Brezillon <boris.brezillon@bootlin.com>

The procedure used to enable 4 byte addressing mode depends on the NOR
device, so let's provide a hook so that manufacturer specific handling
can be implemented in a sane way.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[tudor.ambarus@microchip.com: use nor->params.set_4byte() instead of
nor->set_4byte()]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 76 ++++++++++++++++++++++---------------------
 include/linux/mtd/spi-nor.h   |  2 ++
 2 files changed, 41 insertions(+), 37 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 93424f914159..1629584be30e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -633,6 +633,17 @@ static int macronix_set_4byte(struct spi_nor *nor, bool enable)
 			      NULL, 0);
 }
 
+static int st_micron_set_4byte(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	write_enable(nor);
+	ret = macronix_set_4byte(nor, enable);
+	write_disable(nor);
+
+	return ret;
+}
+
 static int spansion_set_4byte(struct spi_nor *nor, bool enable)
 {
 	nor->bouncebuf[0] = enable << 7;
@@ -667,45 +678,24 @@ static int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
 	return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1);
 }
 
-/* Enable/disable 4-byte addressing mode. */
-static int set_4byte(struct spi_nor *nor, bool enable)
+static int winbond_set_4byte(struct spi_nor *nor, bool enable)
 {
-	int status;
-	bool need_wren = false;
-
-	switch (JEDEC_MFR(nor->info)) {
-	case SNOR_MFR_ST:
-	case SNOR_MFR_MICRON:
-		/* Some Micron need WREN command; all will accept it */
-		need_wren = true;
-		/* fall through */
-	case SNOR_MFR_MACRONIX:
-	case SNOR_MFR_WINBOND:
-		if (need_wren)
-			write_enable(nor);
+	int ret;
 
-		status = macronix_set_4byte(nor, enable);
-		if (need_wren)
-			write_disable(nor);
+	ret = macronix_set_4byte(nor, enable);
+	if (ret || enable)
+		return ret;
 
-		if (!status && !enable &&
-		    JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) {
-			/*
-			 * On Winbond W25Q256FV, leaving 4byte mode causes
-			 * the Extended Address Register to be set to 1, so all
-			 * 3-byte-address reads come from the second 16M.
-			 * We must clear the register to enable normal behavior.
-			 */
-			write_enable(nor);
-			spi_nor_write_ear(nor, 0);
-			write_disable(nor);
-		}
+	/*
+	 * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
+	 * Register to be set to 1, so all 3-byte-address reads come from the
+	 * second 16M. We must clear the register to enable normal behavior.
+	 */
+	write_enable(nor);
+	ret = spi_nor_write_ear(nor, 0);
+	write_disable(nor);
 
-		return status;
-	default:
-		/* Spansion style */
-		return spansion_set_4byte(nor, enable);
-	}
+	return ret;
 }
 
 static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
@@ -4153,11 +4143,18 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
 static void macronix_set_default_init(struct spi_nor *nor)
 {
 	nor->params.quad_enable = macronix_quad_enable;
+	nor->params.set_4byte = macronix_set_4byte;
 }
 
 static void st_micron_set_default_init(struct spi_nor *nor)
 {
 	nor->params.quad_enable = NULL;
+	nor->params.set_4byte = st_micron_set_4byte;
+}
+
+static void winbond_set_default_init(struct spi_nor *nor)
+{
+	nor->params.set_4byte = winbond_set_4byte;
 }
 
 /**
@@ -4178,6 +4175,10 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 		st_micron_set_default_init(nor);
 		break;
 
+	case SNOR_MFR_WINBOND:
+		winbond_set_default_init(nor);
+		break;
+
 	default:
 		break;
 	}
@@ -4222,6 +4223,7 @@ static void spi_nor_legacy_init_params(struct spi_nor *nor)
 
 	/* Initialize legacy flash parameters and settings. */
 	params->quad_enable = spansion_quad_enable;
+	params->set_4byte = spansion_set_4byte;
 
 	/* Set SPI NOR sizes. */
 	params->size = (u64)info->sector_size * info->n_sectors;
@@ -4610,7 +4612,7 @@ static int spi_nor_init(struct spi_nor *nor)
 		 */
 		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
 			  "enabling reset hack; may not recover from unexpected reboots\n");
-		set_4byte(nor, true);
+		nor->params.set_4byte(nor, true);
 	}
 
 	return 0;
@@ -4634,7 +4636,7 @@ void spi_nor_restore(struct spi_nor *nor)
 	/* restore the addressing mode */
 	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
 	    nor->flags & SNOR_F_BROKEN_RESET)
-		set_4byte(nor, false);
+		nor->params.set_4byte(nor, false);
 }
 EXPORT_SYMBOL_GPL(spi_nor_restore);
 
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index a3a765c21edc..012731ad339f 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -482,6 +482,7 @@ struct spi_nor;
  * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
  *                      Table.
  * @quad_enable:	enables SPI NOR quad mode.
+ * @set_4byte:		puts the SPI NOR in 4 byte addressing mode.
  * @disable_block_protection: disables block protection during power-up.
  */
 struct spi_nor_flash_parameter {
@@ -495,6 +496,7 @@ struct spi_nor_flash_parameter {
 	struct spi_nor_erase_map        erase_map;
 
 	int (*quad_enable)(struct spi_nor *nor);
+	int (*set_4byte)(struct spi_nor *nor, bool enable);
 	int (*disable_block_protection)(struct spi_nor *nor);
 };
 
-- 
2.9.5


  parent reply	other threads:[~2019-08-24 12:00 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-24 12:00 [PATCH v2 0/7] mtd: spi-nor: move manuf out of the core - batch 1 Tudor.Ambarus
2019-08-24 12:00 ` [PATCH v2 1/7] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-24 12:00 ` [PATCH v2 2/7] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-24 12:00 ` [PATCH v2 3/7] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-25 11:47   ` Boris Brezillon
2019-08-25 13:08     ` Tudor.Ambarus
2019-08-24 12:00 ` [PATCH v2 4/7] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-25 12:03   ` Boris Brezillon
2019-08-25 12:23     ` Tudor.Ambarus
2019-08-25 12:51       ` Boris Brezillon
2019-08-24 12:00 ` Tudor.Ambarus [this message]
2019-08-24 12:00 ` [PATCH v2 6/7] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-25 12:26   ` Boris Brezillon
2019-08-25 13:10     ` Tudor.Ambarus
2019-08-24 12:00 ` [PATCH v2 7/7] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-25 12:24   ` Boris Brezillon
2019-08-25 12:57     ` Tudor.Ambarus
2019-08-25 13:22       ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190824120027.14452-6-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).