From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com,
kieran.bingham+renesas@ideasonboard.com, geert@linux-m68k.org,
horms@verge.net.au, uli@fpond.eu, airlied@linux.ie,
daniel@ffwll.ch
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
koji.matsuoka.xm@renesas.com, muroya@ksk.co.jp,
VenkataRajesh.Kalakodima@in.bosch.com,
Harsha.ManjulaMallikarjun@in.bosch.com,
linux-renesas-soc@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 10/14] drm: rcar-du: kms: Collect CMM instances
Date: Sun, 25 Aug 2019 15:51:50 +0200 [thread overview]
Message-ID: <20190825135154.11488-11-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190825135154.11488-1-jacopo+renesas@jmondi.org>
Implement device tree parsing to collect the available CMM instances
described by the 'cmms' property. Associate CMMs with CRTCs and store a
mask of active CMMs in the DU group for later enablement.
Enforce the suspend/resume ordering of DU and CMM by creating a
stateless device link between the two to make sure the CMM supplier
device suspends after and resumes before the DU consumer.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 6 +++
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 2 +
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 3 ++
drivers/gpu/drm/rcar-du/rcar_du_group.h | 2 +
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 63 +++++++++++++++++++++++++
5 files changed, 76 insertions(+)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 2da46e3dc4ae..23f1d6cc1719 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -1194,6 +1194,12 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
if (ret < 0)
return ret;
+ /* CMM might be disabled for this CRTC. */
+ if (rcdu->cmms[swindex]) {
+ rcrtc->cmm = rcdu->cmms[swindex];
+ rgrp->cmms_mask |= BIT(hwindex % 2);
+ }
+
drm_crtc_helper_add(crtc, &crtc_helper_funcs);
/* Start with vertical blanking interrupt reporting disabled. */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 3b7fc668996f..5f2940c42225 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -39,6 +39,7 @@ struct rcar_du_vsp;
* @vblank_wait: wait queue used to signal vertical blanking
* @vblank_count: number of vertical blanking interrupts to wait for
* @group: CRTC group this CRTC belongs to
+ * @cmm: CMM associated with this CRTC
* @vsp: VSP feeding video to this CRTC
* @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
* @writeback: the writeback connector
@@ -64,6 +65,7 @@ struct rcar_du_crtc {
unsigned int vblank_count;
struct rcar_du_group *group;
+ struct platform_device *cmm;
struct rcar_du_vsp *vsp;
unsigned int vsp_pipe;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index a00dccc447aa..300ec60ba31b 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/wait.h>
+#include "rcar_cmm.h"
#include "rcar_du_crtc.h"
#include "rcar_du_group.h"
#include "rcar_du_vsp.h"
@@ -70,6 +71,7 @@ struct rcar_du_device_info {
#define RCAR_DU_MAX_CRTCS 4
#define RCAR_DU_MAX_GROUPS DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
+#define RCAR_DU_MAX_CMMS 4
#define RCAR_DU_MAX_VSPS 4
struct rcar_du_device {
@@ -86,6 +88,7 @@ struct rcar_du_device {
struct rcar_du_encoder *encoders[RCAR_DU_OUTPUT_MAX];
struct rcar_du_group groups[RCAR_DU_MAX_GROUPS];
+ struct platform_device *cmms[RCAR_DU_MAX_CMMS];
struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
struct {
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.h b/drivers/gpu/drm/rcar-du/rcar_du_group.h
index 87950c1f6a52..e9906609c635 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.h
@@ -22,6 +22,7 @@ struct rcar_du_device;
* @mmio_offset: registers offset in the device memory map
* @index: group index
* @channels_mask: bitmask of populated DU channels in this group
+ * @cmms_mask: bitmask of available CMMs in this group
* @num_crtcs: number of CRTCs in this group (1 or 2)
* @use_count: number of users of the group (rcar_du_group_(get|put))
* @used_crtcs: number of CRTCs currently in use
@@ -37,6 +38,7 @@ struct rcar_du_group {
unsigned int index;
unsigned int channels_mask;
+ unsigned int cmms_mask;
unsigned int num_crtcs;
unsigned int use_count;
unsigned int used_crtcs;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 2dc9caee8767..61ca1d3c379a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -17,7 +17,9 @@
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
+#include <linux/device.h>
#include <linux/of_graph.h>
+#include <linux/of_platform.h>
#include <linux/wait.h>
#include "rcar_du_crtc.h"
@@ -614,6 +616,62 @@ static int rcar_du_vsps_init(struct rcar_du_device *rcdu)
return ret;
}
+static int rcar_du_cmm_init(struct rcar_du_device *rcdu)
+{
+ const struct device_node *np = rcdu->dev->of_node;
+ unsigned int i;
+ int cells;
+
+ cells = of_property_count_u32_elems(np, "cmms");
+ if (cells == -EINVAL)
+ return 0;
+
+ if (cells > RCAR_DU_MAX_CMMS || cells > rcdu->num_crtcs) {
+ dev_err(rcdu->dev,
+ "Invalid number of entries in 'cmms' property\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cells; ++i) {
+ struct platform_device *pdev;
+ struct device_link *link;
+ struct device_node *cmm;
+
+ cmm = of_parse_phandle(np, "cmms", i);
+ if (IS_ERR(cmm)) {
+ dev_err(rcdu->dev, "Failed to parse 'cmms' property\n");
+ return PTR_ERR(cmm);
+ }
+
+ if (!of_device_is_available(cmm)) {
+ /* It's fine to have a phandle to a non-enabled CMM. */
+ of_node_put(cmm);
+ continue;
+ }
+
+ pdev = of_find_device_by_node(cmm);
+ if (IS_ERR(pdev)) {
+ dev_err(rcdu->dev, "No device found for CMM%u\n", i);
+ of_node_put(cmm);
+ return PTR_ERR(pdev);
+ }
+
+ of_node_put(cmm);
+
+ link = device_link_add(rcdu->dev, &pdev->dev,
+ DL_FLAG_STATELESS);
+ if (!link) {
+ dev_err(rcdu->dev,
+ "Failed to create device link to CMM%u\n", i);
+ return -EINVAL;
+ }
+
+ rcdu->cmms[i] = pdev;
+ }
+
+ return 0;
+}
+
int rcar_du_modeset_init(struct rcar_du_device *rcdu)
{
static const unsigned int mmio_offsets[] = {
@@ -704,6 +762,11 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
return ret;
}
+ /* Initialize the Color Management Modules. */
+ ret = rcar_du_cmm_init(rcdu);
+ if (ret)
+ return ret;
+
/* Create the CRTCs. */
for (swindex = 0, hwindex = 0; swindex < rcdu->num_crtcs; ++hwindex) {
struct rcar_du_group *rgrp;
--
2.22.0
next prev parent reply other threads:[~2019-08-25 13:51 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-25 13:51 [PATCH v3 00/14] drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-08-25 13:51 ` [PATCH v3 01/14] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-08-26 7:34 ` Geert Uytterhoeven
2019-08-26 7:59 ` Jacopo Mondi
2019-08-26 8:38 ` Geert Uytterhoeven
2019-08-26 10:15 ` Laurent Pinchart
2019-08-30 18:01 ` Jacopo Mondi
2019-09-05 11:50 ` Laurent Pinchart
2019-09-05 12:05 ` Geert Uytterhoeven
2019-09-05 12:20 ` Laurent Pinchart
2019-09-05 13:28 ` Jacopo Mondi
2019-08-25 13:51 ` [PATCH v3 02/14] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-08-27 20:29 ` Rob Herring
2019-08-28 7:32 ` Geert Uytterhoeven
2019-08-28 8:28 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 03/14] arm64: dts: renesas: r8a7796: Add CMM units Jacopo Mondi
2019-08-26 7:28 ` Geert Uytterhoeven
2019-08-26 8:00 ` Jacopo Mondi
2019-08-26 22:43 ` Laurent Pinchart
2019-08-27 9:55 ` Jacopo Mondi
2019-08-27 10:12 ` Geert Uytterhoeven
2019-08-25 13:51 ` [PATCH v3 04/14] arm64: dts: renesas: r8a7795: " Jacopo Mondi
2019-08-26 22:45 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 05/14] arm64: dts: renesas: r8a77965: " Jacopo Mondi
2019-08-26 22:45 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 06/14] arm64: dts: renesas: r8a77990: " Jacopo Mondi
2019-08-26 22:47 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 07/14] arm64: dts: renesas: r8a77995: " Jacopo Mondi
2019-08-26 22:47 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 08/14] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-08-26 7:31 ` Geert Uytterhoeven
2019-08-26 8:02 ` Jacopo Mondi
2019-08-27 0:24 ` Laurent Pinchart
2019-08-27 14:56 ` Jacopo Mondi
2019-08-27 15:48 ` Jacopo Mondi
2019-08-27 16:34 ` Laurent Pinchart
2019-09-05 9:57 ` Jacopo Mondi
2019-09-05 11:17 ` Laurent Pinchart
2019-09-05 13:14 ` Jacopo Mondi
2019-09-05 13:39 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 09/14] drm: rcar-du: Claim CMM support for Gen3 SoCs Jacopo Mondi
2019-08-25 13:51 ` Jacopo Mondi [this message]
2019-08-26 23:51 ` [PATCH v3 10/14] drm: rcar-du: kms: Collect CMM instances Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 11/14] drm: rcar-du: crtc: Enable and disable CMMs Jacopo Mondi
2019-08-25 13:51 ` [PATCH v3 12/14] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-08-25 13:51 ` [PATCH v3 13/14] drm: rcar-du: kms: Update CMM in atomic commit tail Jacopo Mondi
2019-08-27 0:00 ` Laurent Pinchart
2019-08-27 0:19 ` Laurent Pinchart
2019-08-27 14:44 ` Jacopo Mondi
2019-08-27 16:38 ` Laurent Pinchart
2019-08-25 13:51 ` [PATCH v3 14/14] drm: rcar-du: Force CMM enablement when resuming Jacopo Mondi
2019-08-27 0:05 ` Laurent Pinchart
2019-09-05 10:58 ` Jacopo Mondi
2019-09-05 11:25 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190825135154.11488-11-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=Harsha.ManjulaMallikarjun@in.bosch.com \
--cc=VenkataRajesh.Kalakodima@in.bosch.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=muroya@ksk.co.jp \
--cc=uli@fpond.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).