From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, jbrunet@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
Date: Mon, 26 Aug 2019 09:25:37 +0200 [thread overview]
Message-ID: <20190826072539.27725-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190826072539.27725-1-narmstrong@baylibre.com>
The Amlogic SM1 DynamIQ Shared Unit has a dedicated clock tree similar to the
CPU clock tree with a supplementaty mux to select the CPU0 clock instead.
Leave this as read-only since it's set up by the early boot stages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 184 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 15 +++-
2 files changed, 198 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 34dfac4b4dc6..e00df17f800a 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -676,6 +676,172 @@ static struct clk_regmap g12b_cpub_clk = {
},
};
+static struct clk_regmap sm1_gp1_pll;
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap sm1_dsu_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap sm1_dsu_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "Mux0_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap sm1_dsu_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw,
+ &sm1_dsu_clk_mux0_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap sm1_dsu_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw,
+ &sm1_dsu_clk_mux1_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap sm1_dsu_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_postmux0.hw,
+ &sm1_dsu_clk_postmux1.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap sm1_dsu_final_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_final",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_dyn.hw,
+ &g12a_sys_pll.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 4 */
+static struct clk_regmap sm1_dsu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 27,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ &sm1_dsu_final_clk.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
static int g12a_cpu_clk_mux_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -4401,6 +4567,15 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_TS] = &g12a_ts.hw,
[CLKID_GP1_PLL_DCO] = &sm1_gp1_pll_dco.hw,
[CLKID_GP1_PLL] = &sm1_gp1_pll.hw,
+ [CLKID_DSU_CLK_DYN0_SEL] = &sm1_dsu_clk_premux0.hw,
+ [CLKID_DSU_CLK_DYN0_DIV] = &sm1_dsu_clk_premux1.hw,
+ [CLKID_DSU_CLK_DYN0] = &sm1_dsu_clk_mux0_div.hw,
+ [CLKID_DSU_CLK_DYN1_SEL] = &sm1_dsu_clk_postmux0.hw,
+ [CLKID_DSU_CLK_DYN1_DIV] = &sm1_dsu_clk_mux1_div.hw,
+ [CLKID_DSU_CLK_DYN1] = &sm1_dsu_clk_postmux1.hw,
+ [CLKID_DSU_CLK_DYN] = &sm1_dsu_clk_dyn.hw,
+ [CLKID_DSU_CLK_FINAL] = &sm1_dsu_final_clk.hw,
+ [CLKID_DSU_CLK] = &sm1_dsu_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4623,6 +4798,15 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12b_cpub_clk_trace,
&sm1_gp1_pll_dco,
&sm1_gp1_pll,
+ &sm1_dsu_clk_premux0,
+ &sm1_dsu_clk_premux1,
+ &sm1_dsu_clk_mux0_div,
+ &sm1_dsu_clk_postmux0,
+ &sm1_dsu_clk_mux1_div,
+ &sm1_dsu_clk_postmux1,
+ &sm1_dsu_clk_dyn,
+ &sm1_dsu_final_clk,
+ &sm1_dsu_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index e426b4121b7a..6804fcced6b5 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -80,6 +80,11 @@
#define HHI_SYS_CPUB_CLK_CNTL1 0x200
#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
+#define HHI_SYS_CPU_CLK_CNTL2 0x210
+#define HHI_SYS_CPU_CLK_CNTL3 0x214
+#define HHI_SYS_CPU_CLK_CNTL4 0x218
+#define HHI_SYS_CPU_CLK_CNTL5 0x21c
+#define HHI_SYS_CPU_CLK_CNTL6 0x220
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
#define HHI_MIPIDSI_PHY_CLK_CNTL 0x254
@@ -242,8 +247,16 @@
#define CLKID_CPUB_CLK_TRACE_SEL 240
#define CLKID_CPUB_CLK_TRACE 241
#define CLKID_GP1_PLL_DCO 242
+#define CLKID_DSU_CLK_DYN0_SEL 244
+#define CLKID_DSU_CLK_DYN0_DIV 245
+#define CLKID_DSU_CLK_DYN0 246
+#define CLKID_DSU_CLK_DYN1_SEL 247
+#define CLKID_DSU_CLK_DYN1_DIV 248
+#define CLKID_DSU_CLK_DYN1 249
+#define CLKID_DSU_CLK_DYN 250
+#define CLKID_DSU_CLK_FINAL 251
-#define NR_CLKS 244
+#define NR_CLKS 253
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.22.0
next prev parent reply other threads:[~2019-08-26 7:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 7:25 [PATCH v2 0/5] 0/6] arm64: meson-sm1: add support for DVFS Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 1/5] dt-bindings: clk: meson: add sm1 periph clock controller bindings Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 2/5] clk: meson: g12a: add support for SM1 GP1 PLL Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong [this message]
2019-08-26 7:25 ` [PATCH v2 4/5] clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: enable DVFS Neil Armstrong
2019-08-26 7:26 ` Neil Armstrong
2019-08-26 10:38 ` [PATCH v2 0/5] 0/6] arm64: meson-sm1: add support for DVFS Jerome Brunet
2019-08-27 19:12 ` Kevin Hilman
2019-08-27 22:35 ` Kevin Hilman
2019-08-28 8:11 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826072539.27725-4-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).