From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org
Cc: khilman@baylibre.com, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 1/2] drm/meson: dw_hdmi: add resume/suspend hooks
Date: Tue, 27 Aug 2019 11:58:24 +0200 [thread overview]
Message-ID: <20190827095825.21015-2-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190827095825.21015-1-narmstrong@baylibre.com>
Add the suspens and resume hooks to:
- reset the whole HDMI glue and HDMI controller on suspend
- re-init the HDMI glue and HDMI controller on resume
The HDMI glue init is refactored to be re-used from the resume hook.
It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 110 ++++++++++++++++++--------
1 file changed, 76 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index df3f9ddd2234..a722ddbfbede 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -799,6 +799,47 @@ static bool meson_hdmi_connector_is_available(struct device *dev)
return false;
}
+static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
+{
+ struct meson_drm *priv = meson_dw_hdmi->priv;
+
+ /* Enable clocks */
+ regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
+
+ /* Bring HDMITX MEM output of power down */
+ regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0);
+
+ /* Reset HDMITX APB & TX & PHY */
+ reset_control_reset(meson_dw_hdmi->hdmitx_apb);
+ reset_control_reset(meson_dw_hdmi->hdmitx_ctrl);
+ reset_control_reset(meson_dw_hdmi->hdmitx_phy);
+
+ /* Enable APB3 fail on error */
+ if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ writel_bits_relaxed(BIT(15), BIT(15),
+ meson_dw_hdmi->hdmitx + HDMITX_TOP_CTRL_REG);
+ writel_bits_relaxed(BIT(15), BIT(15),
+ meson_dw_hdmi->hdmitx + HDMITX_DWC_CTRL_REG);
+ }
+
+ /* Bring out of reset */
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi,
+ HDMITX_TOP_SW_RESET, 0);
+
+ msleep(20);
+
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi,
+ HDMITX_TOP_CLK_CNTL, 0xff);
+
+ /* Enable HDMI-TX Interrupt */
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
+ HDMITX_TOP_INTR_CORE);
+
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_MASKN,
+ HDMITX_TOP_INTR_CORE);
+
+}
+
static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
void *data)
{
@@ -922,40 +963,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
DRM_DEBUG_DRIVER("encoder initialized\n");
- /* Enable clocks */
- regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
-
- /* Bring HDMITX MEM output of power down */
- regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0);
-
- /* Reset HDMITX APB & TX & PHY */
- reset_control_reset(meson_dw_hdmi->hdmitx_apb);
- reset_control_reset(meson_dw_hdmi->hdmitx_ctrl);
- reset_control_reset(meson_dw_hdmi->hdmitx_phy);
-
- /* Enable APB3 fail on error */
- if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
- writel_bits_relaxed(BIT(15), BIT(15),
- meson_dw_hdmi->hdmitx + HDMITX_TOP_CTRL_REG);
- writel_bits_relaxed(BIT(15), BIT(15),
- meson_dw_hdmi->hdmitx + HDMITX_DWC_CTRL_REG);
- }
-
- /* Bring out of reset */
- meson_dw_hdmi->data->top_write(meson_dw_hdmi,
- HDMITX_TOP_SW_RESET, 0);
-
- msleep(20);
-
- meson_dw_hdmi->data->top_write(meson_dw_hdmi,
- HDMITX_TOP_CLK_CNTL, 0xff);
-
- /* Enable HDMI-TX Interrupt */
- meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
- HDMITX_TOP_INTR_CORE);
-
- meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_MASKN,
- HDMITX_TOP_INTR_CORE);
+ meson_dw_hdmi_init(meson_dw_hdmi);
/* Bridge / Connector */
@@ -991,6 +999,34 @@ static const struct component_ops meson_dw_hdmi_ops = {
.unbind = meson_dw_hdmi_unbind,
};
+static int __maybe_unused meson_dw_hdmi_pm_suspend(struct device *dev)
+{
+ struct meson_dw_hdmi *meson_dw_hdmi = dev_get_drvdata(dev);
+
+ if (!meson_dw_hdmi)
+ return 0;
+
+ /* Reset TOP */
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi,
+ HDMITX_TOP_SW_RESET, 0);
+
+ return 0;
+}
+
+static int __maybe_unused meson_dw_hdmi_pm_resume(struct device *dev)
+{
+ struct meson_dw_hdmi *meson_dw_hdmi = dev_get_drvdata(dev);
+
+ if (!meson_dw_hdmi)
+ return 0;
+
+ meson_dw_hdmi_init(meson_dw_hdmi);
+
+ dw_hdmi_resume(meson_dw_hdmi->hdmi);
+
+ return 0;
+}
+
static int meson_dw_hdmi_probe(struct platform_device *pdev)
{
return component_add(&pdev->dev, &meson_dw_hdmi_ops);
@@ -1003,6 +1039,11 @@ static int meson_dw_hdmi_remove(struct platform_device *pdev)
return 0;
}
+static const struct dev_pm_ops meson_dw_hdmi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(meson_dw_hdmi_pm_suspend,
+ meson_dw_hdmi_pm_resume)
+};
+
static const struct of_device_id meson_dw_hdmi_of_table[] = {
{ .compatible = "amlogic,meson-gxbb-dw-hdmi",
.data = &meson_dw_hdmi_gx_data },
@@ -1022,6 +1063,7 @@ static struct platform_driver meson_dw_hdmi_platform_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = meson_dw_hdmi_of_table,
+ .pm = &meson_dw_hdmi_pm_ops,
},
};
module_platform_driver(meson_dw_hdmi_platform_driver);
--
2.22.0
next prev parent reply other threads:[~2019-08-27 9:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 9:58 [PATCH 0/2] drm/meson: add resume/suspend hooks Neil Armstrong
2019-08-27 9:58 ` Neil Armstrong [this message]
2019-08-27 9:58 ` [PATCH 2/2] " Neil Armstrong
2019-08-27 16:44 ` [PATCH 0/2] " Daniel Vetter
2019-08-27 19:17 ` Kevin Hilman
2019-08-28 8:05 ` Neil Armstrong
2019-08-28 15:12 ` Kevin Hilman
2019-08-28 15:14 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827095825.21015-2-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).