From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan @ agner . ch" <stefan@agner.ch>,
"devicetree @ vger . kernel . org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
Oleksandr Suvorov <oleksandr.suvorov@toradex.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH v5 11/13] ARM: dts: imx6ull: improve can templates
Date: Tue, 27 Aug 2019 13:18:38 +0000 [thread overview]
Message-ID: <20190827131806.6816-12-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190827131806.6816-1-philippe.schenker@toradex.com>
From: Max Krummenacher <max.krummenacher@toradex.com>
Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63
and move the inactive flexcan nodes to imx6ull-colibri-eval-v3.dtsi
where they belong.
Note that this commit does not enable flexcan functionality, but rather
eases the effort needed to do so.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---
Changes in v5:
- Added Olek's Reviewed-by
Changes in v4:
- Move can nodes to module deviceteree include imx6ull-colibri.dtsi
Changes in v3: None
Changes in v2: None
.../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 28 +++++++++++++++++--
3 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index fb213bec4654..95a11b8bcbdb 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -15,7 +15,7 @@
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
- &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>;
+ &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
};
&iomuxc_snvs {
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 038d8c90f6df..a0545431b3dc 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -26,7 +26,7 @@
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
- &pinctrl_gpio4 &pinctrl_gpio5>;
+ &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index e3220298dd6f..6d850d997e1e 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -54,6 +54,18 @@
vref-supply = <®_module_3v3_avdd>;
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
/* Colibri SPI */
&ecspi1 {
cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
@@ -256,6 +268,13 @@
>;
};
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
+ >;
+ };
+
pinctrl_flexcan2: flexcan2-grp {
fsl,pins = <
MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
@@ -271,8 +290,6 @@
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */
- MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */
MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */
MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */
@@ -325,6 +342,13 @@
>;
};
+ pinctrl_gpio7: gpio7-grp { /* CAN1 */
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */
+ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_gpmi_nand: gpmi-nand-grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
--
2.23.0
next prev parent reply other threads:[~2019-08-27 13:18 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 13:18 [PATCH v5 00/13] Common patches from downstream development Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 01/13] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 02/13] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 03/13] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 04/13] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 05/13] ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 06/13] ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 07/13] ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 08/13] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 09/13] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 10/13] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-08-27 13:18 ` Philippe Schenker [this message]
2019-08-27 13:18 ` [PATCH v5 12/13] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-08-27 13:18 ` [PATCH v5 13/13] ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board Philippe Schenker
2019-09-14 2:30 ` [PATCH v5 00/13] Common patches from downstream development Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827131806.6816-12-philippe.schenker@toradex.com \
--to=philippe.schenker@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=michal.vokac@ysoft.com \
--cc=oleksandr.suvorov@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).