[PATCH v2 5/6] arm: dts: Change PCIe INTx mapping for HR2

From: Srinath Mannam <srinath.mannam@broadcom.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: bcm-kernel-feedback-list@broadcom.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Ray Jui <ray.jui@broadcom.com>,
	Srinath Mannam <srinath.mannam@broadcom.com>
Subject: [PATCH v2 5/6] arm: dts: Change PCIe INTx mapping for HR2
Date: Wed, 28 Aug 2019 14:24:47 +0530	[thread overview]
Message-ID: <1566982488-9673-6-git-send-email-srinath.mannam@broadcom.com> (raw)
In-Reply-To: <1566982488-9673-1-git-send-email-srinath.mannam@broadcom.com>

From: Ray Jui <ray.jui@broadcom.com>

Change the PCIe INTx mapping to model the 4 INTx interrupts in the
IRQ domain of the iProc PCIe controller itself

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e4d4973..eb449d0 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -299,8 +299,11 @@
 		reg = <0x18012000 0x1000>;
 
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 1>,
+				<0 0 0 2 &pcie0_intc 2>,
+				<0 0 0 3 &pcie0_intc 3>,
+				<0 0 0 4 &pcie0_intc 4>;
 
 		linux,pci-domain = <0>;
 
@@ -328,6 +331,14 @@
 				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
+
+		pcie0_intc: interrupt-controller {
+			compatible = "brcm,iproc-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	pcie1: pcie@18013000 {
@@ -335,8 +346,11 @@
 		reg = <0x18013000 0x1000>;
 
 		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+				<0 0 0 2 &pcie1_intc 2>,
+				<0 0 0 3 &pcie1_intc 3>,
+				<0 0 0 4 &pcie1_intc 4>;
 
 		linux,pci-domain = <1>;
 
@@ -364,5 +378,13 @@
 				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
+
+		pcie1_intc: interrupt-controller {
+			compatible = "brcm,iproc-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
-- 
2.7.4

