[PATCH v14 03/10] dt-binding: gce: add binding for gce client reg property

From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: Jassi Brar <jassisinghbrar@gmail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, CK HU <ck.hu@mediatek.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>,
	Houlong Wei <houlong.wei@mediatek.com>,
	Bibby Hsieh <bibby.hsieh@mediatek.com>
Subject: [PATCH v14 03/10] dt-binding: gce: add binding for gce client reg property
Date: Thu, 29 Aug 2019 09:48:09 +0800	[thread overview]
Message-ID: <20190829014817.25482-4-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20190829014817.25482-1-bibby.hsieh@mediatek.com>

cmdq driver provide a function that get the relationship
of sub system number from device node for client.
add specification for #subsys-cells, mediatek,gce-client-reg.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt      | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 1f7f8f2a3f49..7b13787ab13d 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -25,8 +25,16 @@ Required properties:
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
   property and list of phandle, mailbox specifiers.
-- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
-  to the register address.
+Optional properties for a client device:
+- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
+  to the register address, it should have this property and list of phandle,
+  sub-system specifiers.
+  <&phandle subsys_number start_offset size>
+  phandle: Label name of a gce node.
+  subsys_number: specify the sub-system id which is corresponding
+                 to the register address.
+  start_offset: the start offset of register address that GCE can access.
+  size: the total size of register address that GCE can access.
 
 Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
 or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -48,9 +56,9 @@ Example for a client device:
 		compatible = "mediatek,mt8173-mmsys";
 		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
 			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
 		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
 				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
+					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
 		...
 	};
-- 
2.18.0

