[01/15] arm64: dts: meson-g12a-sei510: add keep-power-in-suspend property in SDIO node
diff mbox series

Message ID 20190829152342.27794-2-narmstrong@baylibre.com
State New, archived
Headers show
  • arm64: dts: meson: add keep-power-in-suspend property in boards SDIO nodes
Related show

Commit Message

Neil Armstrong Aug. 29, 2019, 3:23 p.m. UTC
The WiFi firmware requires that the power is kept enabled while in
suspend mode. Add the keep-power-in-suspend property in the SDIO node
to specify that the power must be kept when entering in a system wide
suspend state.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 3 +++
 1 file changed, 3 insertions(+)

diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 35d2ebbd6d4e..b31502727d4a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -508,6 +508,9 @@ 
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vmmc-supply = <&vddao_3v3>;