From: Christoph Hellwig <hch@lst.de>
To: Palmer Dabbelt <palmer@sifive.com>,
Paul Walmsley <paul.walmsley@sifive.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Atish Patra <atish.patra@wdc.com>
Subject: [PATCH 06/20] riscv: don't use the rdtime(h) pseudo-instructions
Date: Tue, 3 Sep 2019 11:32:25 +0200 [thread overview]
Message-ID: <20190903093239.21278-7-hch@lst.de> (raw)
In-Reply-To: <20190903093239.21278-1-hch@lst.de>
If we just use the CSRs that these map to directly the code is simpler
and doesn't require extra inline assembly code. Also fix up the top-level
comment in timer-riscv.c to not talk about the cycle count or mention
details of the clocksource interface, of which this file is just a
consumer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
---
arch/riscv/include/asm/timex.h | 44 +++++++++++++++----------------
drivers/clocksource/timer-riscv.c | 17 +++---------
2 files changed, 25 insertions(+), 36 deletions(-)
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index 6a703ec9d796..c7ef131b9e4c 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -6,43 +6,41 @@
#ifndef _ASM_RISCV_TIMEX_H
#define _ASM_RISCV_TIMEX_H
-#include <asm/param.h>
+#include <asm/csr.h>
typedef unsigned long cycles_t;
-static inline cycles_t get_cycles_inline(void)
+static inline cycles_t get_cycles(void)
{
- cycles_t n;
-
- __asm__ __volatile__ (
- "rdtime %0"
- : "=r" (n));
- return n;
+ return csr_read(CSR_TIME);
}
-#define get_cycles get_cycles_inline
+#define get_cycles get_cycles
#ifdef CONFIG_64BIT
-static inline uint64_t get_cycles64(void)
+static inline u64 get_cycles64(void)
+{
+ return get_cycles();
+}
+#else /* CONFIG_64BIT */
+static inline u32 get_cycles_hi(void)
{
- return get_cycles();
+ return csr_read(CSR_TIMEH);
}
-#else
-static inline uint64_t get_cycles64(void)
+
+static inline u64 get_cycles64(void)
{
- u32 lo, hi, tmp;
- __asm__ __volatile__ (
- "1:\n"
- "rdtimeh %0\n"
- "rdtime %1\n"
- "rdtimeh %2\n"
- "bne %0, %2, 1b"
- : "=&r" (hi), "=&r" (lo), "=&r" (tmp));
+ u32 hi, lo;
+
+ do {
+ hi = get_cycles_hi();
+ lo = get_cycles();
+ } while (hi != get_cycles_hi());
+
return ((u64)hi << 32) | lo;
}
-#endif
+#endif /* CONFIG_64BIT */
#define ARCH_HAS_READ_CURRENT_TIMER
-
static inline int read_current_timer(unsigned long *timer_val)
{
*timer_val = get_cycles();
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 09e031176bc6..470c7ef02ea4 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -2,6 +2,10 @@
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
+ *
+ * All RISC-V systems have a timer attached to every hart. These timers can be
+ * read from the "time" and "timeh" CSRs, and can use the SBI to setup
+ * events.
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@@ -12,19 +16,6 @@
#include <asm/smp.h>
#include <asm/sbi.h>
-/*
- * All RISC-V systems have a timer attached to every hart. These timers can be
- * read by the 'rdcycle' pseudo instruction, and can use the SBI to setup
- * events. In order to abstract the architecture-specific timer reading and
- * setting functions away from the clock event insertion code, we provide
- * function pointers to the clockevent subsystem that perform two basic
- * operations: rdtime() reads the timer on the current CPU, and
- * next_event(delta) sets the next timer event to 'delta' cycles in the future.
- * As the timers are inherently a per-cpu resource, these callbacks perform
- * operations on the current hart. There is guaranteed to be exactly one timer
- * per hart on all RISC-V systems.
- */
-
static int riscv_clock_next_event(unsigned long delta,
struct clock_event_device *ce)
{
--
2.20.1
next prev parent reply other threads:[~2019-09-03 9:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-03 9:32 RISC-V nommu support v4 Christoph Hellwig
2019-09-03 9:32 ` [PATCH 01/20] irqchip/sifive-plic: set max threshold for ignored handlers Christoph Hellwig
2019-09-03 9:32 ` [PATCH 02/20] riscv: refactor the IPI code Christoph Hellwig
2019-09-03 9:32 ` [PATCH 03/20] riscv: cleanup send_ipi_mask Christoph Hellwig
2019-09-03 9:32 ` [PATCH 04/20] riscv: optimize send_ipi_single Christoph Hellwig
2019-09-03 9:32 ` [PATCH 05/20] riscv: cleanup riscv_cpuid_to_hartid_mask Christoph Hellwig
2019-09-03 9:32 ` Christoph Hellwig [this message]
2019-09-03 9:32 ` [PATCH 07/20] riscv: move the TLB flush logic out of line Christoph Hellwig
2019-09-03 9:32 ` [PATCH 08/20] riscv: abstract out CSR names for supervisor vs machine mode Christoph Hellwig
2019-10-16 2:07 ` Paul Walmsley
2019-10-17 16:20 ` Christoph Hellwig
2019-09-03 9:32 ` [PATCH 09/20] riscv: don't allow selecting SBI based drivers for M-mode Christoph Hellwig
2019-09-03 9:32 ` [PATCH 10/20] riscv: poison SBI calls " Christoph Hellwig
2019-09-03 9:32 ` [PATCH 11/20] riscv: cleanup the default power off implementation Christoph Hellwig
2019-09-03 9:32 ` [PATCH 12/20] riscv: implement remote sfence.i using IPIs Christoph Hellwig
2019-09-03 9:32 ` [PATCH 13/20] riscv: add support for MMIO access to the timer registers Christoph Hellwig
2019-09-03 9:32 ` [PATCH 14/20] riscv: provide native clint access for M-mode Christoph Hellwig
2019-09-03 9:32 ` [PATCH 15/20] riscv: read the hart ID from mhartid on boot Christoph Hellwig
2019-09-03 9:32 ` [PATCH 16/20] riscv: use the correct interrupt levels for M-mode Christoph Hellwig
2019-09-03 9:32 ` [PATCH 17/20] riscv: clear the instruction cache and all registers when booting Christoph Hellwig
2019-09-03 9:32 ` [PATCH 18/20] riscv: add nommu support Christoph Hellwig
2019-09-03 9:32 ` [PATCH 19/20] riscv: provide a flat image loader Christoph Hellwig
2019-09-03 9:32 ` [PATCH 20/20] riscv: disable the EFI PECOFF header for M-mode Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190903093239.21278-7-hch@lst.de \
--to=hch@lst.de \
--cc=atish.patra@wdc.com \
--cc=damien.lemoal@wdc.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).