linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: stable@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-mtd@lists.infradead.org
Subject: [BACKPORT 4.14.y 06/18] ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes
Date: Thu,  5 Sep 2019 10:17:47 -0600	[thread overview]
Message-ID: <20190905161759.28036-7-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20190905161759.28036-1-mathieu.poirier@linaro.org>

From: "Andrew F. Davis" <afd@ti.com>

commit dcb407b257af06fa58b0544ec01ec9e0d3927e02 upstream

Currently BCLK inverting is only handled when the DAI format is
DSP, but the BCLK may be inverted in any supported mode. Without
this using this CODEC in any other mode than DSP with the BCLK
inverted leads to bad sampling timing and very poor audio quality.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 sound/soc/codecs/tlv320aic31xx.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 54a87a905eb6..d3bd0bf15ddb 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -924,6 +924,18 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface_reg2 |= AIC31XX_BCLKINV_MASK;
+		break;
+	default:
+		dev_err(codec->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
@@ -931,16 +943,12 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_DSP_A:
 		dsp_a_val = 0x1;
 	case SND_SOC_DAIFMT_DSP_B:
-		/* NOTE: BCLKINV bit value 1 equas NB and 0 equals IB */
-		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-		case SND_SOC_DAIFMT_NB_NF:
-			iface_reg2 |= AIC31XX_BCLKINV_MASK;
-			break;
-		case SND_SOC_DAIFMT_IB_NF:
-			break;
-		default:
-			return -EINVAL;
-		}
+		/*
+		 * NOTE: This CODEC samples on the falling edge of BCLK in
+		 * DSP mode, this is inverted compared to what most DAIs
+		 * expect, so we invert for this mode
+		 */
+		iface_reg2 ^= AIC31XX_BCLKINV_MASK;
 		iface_reg1 |= (AIC31XX_DSP_MODE <<
 			       AIC31XX_IFACE1_DATATYPE_SHIFT);
 		break;
-- 
2.17.1


  parent reply	other threads:[~2019-09-05 16:19 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-05 16:17 [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 01/18] PCI: designware-ep: Fix find_first_zero_bit() usage Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 02/18] PCI: dra7xx: Fix legacy INTD IRQ handling Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver Mathieu Poirier
2019-09-10 14:34   ` Greg KH
2019-09-11 11:48     ` Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround Mathieu Poirier
2019-09-10 14:36   ` Greg KH
2019-09-11 14:01     ` Mathieu Poirier
2019-11-11  9:16       ` Greg KH
2019-09-05 16:17 ` [BACKPORT 4.14.y 05/18] mfd: palmas: Assign the right powerhold mask for tps65917 Mathieu Poirier
2019-09-05 16:17 ` Mathieu Poirier [this message]
2019-09-05 16:17 ` [BACKPORT 4.14.y 07/18] mtd: spi-nor: enable 4B opcodes for mx66l51235l Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 08/18] mtd: spi-nor: cadence-quadspi: add a delay in write sequence Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 09/18] misc: pci_endpoint_test: Prevent some integer overflows Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 10/18] PCI: dra7xx: Add shutdown handler to cleanly turn off clocks Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 11/18] misc: pci_endpoint_test: Fix BUG_ON error during pci_disable_msi() Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 12/18] mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 13/18] ASoC: tlv320dac31xx: mark expected switch fall-through Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 14/18] ASoC: davinci-mcasp: Handle return value of devm_kasprintf Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 15/18] ASoC: davinci: Kill BUG_ON() usage Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 16/18] ASoC: davinci-mcasp: Fix an error handling path in 'davinci_mcasp_probe()' Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 17/18] i2c: omap: Trigger bus recovery in lockup case Mathieu Poirier
2019-09-05 16:17 ` [BACKPORT 4.14.y 18/18] cpufreq: ti-cpufreq: add missing of_node_put() Mathieu Poirier
2019-09-05 16:24 ` [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190905161759.28036-7-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).