From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jiada_wang@mentor.com>
Subject: [PATCH v3 17/49] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
Date: Tue, 17 Sep 2019 18:37:34 +0900 [thread overview]
Message-ID: <20190917093806.18538-3-jiada_wang@mentor.com> (raw)
In-Reply-To: <20190917093806.18538-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
There may be multiple maXTouch chips on a single device which will require
different configuration files. Add a platform data value for the
configuration filename.
Add sysfs entry to write configuration file if the platform data is not
set.
Split out the object initialisation code from mxt_initialize() into
mxt_configure_objects() to allow this.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 71a2a4d1954460b949a16b607f72bafab294ca79)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fix from Vladimir Zapolskiy:
- Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
---
Notes:
- Squash fix from Vladimir Zapolskiy:
+ Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()
Fail in mxt_update_cfg() is critical, because the driver state machine
is broken and it can not be safely used afterwards.
[jiada: Squash fix from ndyer/linux/for-upstream commit c909ada856861f305653b127db3ea0fa60264331
- Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync()]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
.../bindings/input/atmel,maxtouch.txt | 3 +
drivers/input/touchscreen/atmel_mxt_ts.c | 109 +++++++++++++++---
2 files changed, 97 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index e28139ce3cae..713ce870805c 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -37,6 +37,9 @@ Optional properties for main touchpad device:
MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+- atmel,cfg_name: Provide name of configuration file in OBP_RAW format. This
+ will be downloaded from the firmware loader on probe to the device.
+
Example:
touch@4b {
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8d898855923e..c09ef7689f6a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -34,7 +34,6 @@
#include <dt-bindings/input/atmel_mxt_ts.h>
/* Configuration file */
-#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"
/* Registers */
@@ -335,6 +334,8 @@ struct mxt_data {
struct regulator *reg_vdd;
struct regulator *reg_avdd;
char *fw_name;
+ char *cfg_name;
+ const char *pcfg_name;
/* Cached parameters from object table */
u16 T5_address;
@@ -377,6 +378,9 @@ struct mxt_data {
/* Indicates whether device is in suspend */
bool suspended;
+
+ /* Indicates whether device is updating configuration */
+ bool updating_config;
};
struct mxt_vb2_buffer {
@@ -833,9 +837,11 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
static void mxt_input_sync(struct mxt_data *data)
{
- input_mt_report_pointer_emulation(data->input_dev,
- data->t19_num_keys);
- input_sync(data->input_dev);
+ if (data->input_dev) {
+ input_mt_report_pointer_emulation(data->input_dev,
+ data->t19_num_keys);
+ input_sync(data->input_dev);
+ }
}
static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
@@ -2578,13 +2584,21 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;
- error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
- &client->dev, GFP_KERNEL, data,
- mxt_config_cb);
- if (error) {
- dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
- error);
- goto err_free_sysfs;
+ if (data->cfg_name) {
+ error = request_firmware_nowait(THIS_MODULE, true,
+ data->cfg_name,
+ &client->dev,
+ GFP_KERNEL, data,
+ mxt_config_cb);
+ if (error) {
+ dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+ error);
+ goto err_free_sysfs;
+ }
+ } else {
+ error = mxt_configure_objects(data, NULL);
+ if (error)
+ goto err_free_sysfs;
}
return 0;
@@ -3081,19 +3095,21 @@ static int mxt_configure_objects(struct mxt_data *data,
error = mxt_init_t7_power_cfg(data);
if (error) {
dev_err(dev, "Failed to initialize power cfg\n");
- return error;
+ goto err_free_object_table;
}
if (cfg) {
error = mxt_update_cfg(data, cfg);
- if (error)
+ if (error) {
dev_warn(dev, "Error %d updating config\n", error);
+ goto err_free_object_table;
+ }
}
if (data->multitouch) {
error = mxt_initialize_input_device(data);
if (error)
- return error;
+ goto err_free_object_table;
} else {
dev_warn(dev, "No touch object detected\n");
}
@@ -3101,6 +3117,10 @@ static int mxt_configure_objects(struct mxt_data *data,
mxt_debug_init(data);
return 0;
+
+err_free_object_table:
+ mxt_free_object_table(data);
+ return error;
}
/* Firmware Version is returned as Major.Minor.Build */
@@ -3392,6 +3412,55 @@ static ssize_t mxt_update_fw_store(struct device *dev,
return count;
}
+static ssize_t mxt_update_cfg_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ const struct firmware *cfg;
+ int ret;
+
+ ret = mxt_update_file_name(dev, &data->cfg_name, buf, count);
+ if (ret)
+ return ret;
+
+ ret = request_firmware(&cfg, data->cfg_name, dev);
+ if (ret < 0) {
+ dev_err(dev, "Failure to request config file %s\n",
+ data->cfg_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ data->updating_config = true;
+
+ mxt_free_input_device(data);
+
+ if (data->suspended) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ } else if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP) {
+ mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ mxt_acquire_irq(data);
+ }
+
+ data->suspended = false;
+ }
+
+ ret = mxt_configure_objects(data, cfg);
+ if (ret)
+ goto release;
+
+ ret = count;
+
+release:
+ release_firmware(cfg);
+out:
+ data->updating_config = false;
+ return ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_fw_attrs[] = {
@@ -3406,11 +3475,13 @@ static const struct attribute_group mxt_fw_attr_group = {
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
+ &dev_attr_update_cfg.attr,
NULL
};
@@ -3511,7 +3582,7 @@ static int mxt_stop(struct mxt_data *data)
{
int ret;
- if (data->suspended || data->in_bootloader)
+ if (data->suspended || data->in_bootloader || data->updating_config)
return 0;
switch (data->suspend_mode) {
@@ -3580,6 +3651,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
int n_keys;
int error;
+ device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);
+
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
@@ -3705,6 +3778,12 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (error)
return error;
+ if (data->pcfg_name)
+ mxt_update_file_name(&data->client->dev,
+ &data->cfg_name,
+ data->pcfg_name,
+ strlen(data->pcfg_name));
+
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
--
2.19.2
next prev parent reply other threads:[~2019-09-17 9:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 9:37 [PATCH v3 15/49] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2019-09-17 9:37 ` [PATCH v3 16/49] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2019-09-17 9:37 ` Jiada Wang [this message]
2019-09-17 9:37 ` [PATCH v3 18/49] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2019-09-17 9:37 ` [PATCH v3 19/49] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917093806.18538-3-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).