linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
	<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
	<rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<jiada_wang@mentor.com>
Subject: [PATCH v3 47/49] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data
Date: Tue, 17 Sep 2019 18:43:17 +0900	[thread overview]
Message-ID: <20190917094319.18996-4-jiada_wang@mentor.com> (raw)
In-Reply-To: <20190917094319.18996-1-jiada_wang@mentor.com>

From: Naveen Chakka <Naveen.Chakka@in.bosch.com>

Atmel touch controller contains T38 object where a user can store its own
data of length 64 bytes. T38 data will not be part of checksum
calculation on executing T6 BACKUP command.

format used to update the T38 data is given below:

<offset> <length> <actual_data>

offset: offset address of the data to be written in the t38 object
	(in decimal)

length: length of the data to be written into the t38 object(in decimal)

data: actual data bytes to be written into the t38 object
      (values should be in hex)

Ex:
1. 0 2 10 20
updates first two bytes of the t38 data with values 10 and 20

2. 19 6 10 2f 30 4a 50 60
updates 6 bytes of t38 data from the index 19-24 with hex values

Signed-off-by: Naveen Chakka <Naveen.Chakka@in.bosch.com>
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 102 +++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e67c29f0e0ca..db4ad3b82650 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4027,6 +4027,106 @@ static ssize_t mxt_touch_device_status(struct device *dev, struct
 	return ret;
 }
 
+static ssize_t mxt_t38_data_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	size_t count = 0, size;
+	u8 i, *t38_buf;
+
+	if (!data->object_table)
+		return -ENXIO;
+
+	object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+	size = mxt_obj_size(object);
+
+	/* Pre-allocate buffer large enough to hold max size of t38 object.*/
+	t38_buf = kmalloc(size, GFP_KERNEL);
+	if (!t38_buf)
+		return -ENOMEM;
+
+	count = __mxt_read_reg(data->client, object->start_address,
+			       size, t38_buf);
+	if (count)
+		goto end;
+
+	for (i = 0; i < size; i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "[%2u]: %02x\n", i, t38_buf[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+end:
+	kfree(t38_buf);
+	return count;
+}
+
+static ssize_t mxt_t38_data_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	ssize_t ret = 0, pos, offset;
+	unsigned int i, len, index;
+	u8 *t38_buf;
+
+	if (!data->object_table)
+		return -ENXIO;
+
+	object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+
+	/* Pre-allocate buffer large enough to hold max size of t38 object.*/
+	t38_buf = kmalloc(mxt_obj_size(object), GFP_KERNEL);
+	if (!t38_buf)
+		return -ENOMEM;
+
+	ret = sscanf(buf, "%zd %d%zd", &offset, &len, &pos);
+	if (ret != 2) {
+		dev_err(dev, "Bad format: Invalid parameter to update t38\n");
+		ret = -EINVAL;
+		goto end;
+	}
+
+	if (len == 0) {
+		dev_err(dev,
+			"Bad format: Data length should not be equal to 0\n");
+		ret = -EINVAL;
+		goto end;
+	}
+
+	if (offset < 0 || ((offset + len) > 64)) {
+		dev_err(dev, "Invalid offset value to update t38\n");
+		ret = -EINVAL;
+		goto end;
+	}
+
+	index = pos;
+	for (i = 0; i < len; i++) {
+		ret = sscanf(buf + index, "%hhx%zd", t38_buf + i, &pos);
+		if (ret != 1) {
+			dev_err(dev, "Bad format: Invalid Data\n");
+			ret = -EINVAL;
+			goto end;
+		}
+		index += pos;
+	}
+
+	ret = __mxt_write_reg(data->client, object->start_address + offset,
+			      len, t38_buf);
+	if (ret)
+		goto end;
+
+	ret = mxt_t6_command(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE,
+			     true);
+	if (ret)
+		dev_err(dev, "backup command failed\n");
+	else
+		ret = count;
+end:
+	kfree(t38_buf);
+	return ret;
+}
+
 static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
 static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
@@ -4039,6 +4139,7 @@ static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
 static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
 static DEVICE_ATTR(t25, 0600, mxt_t25_selftest_show, mxt_t25_selftest_store);
 static DEVICE_ATTR(touch_dev_stat, 0444, mxt_touch_device_status, NULL);
+static DEVICE_ATTR(t38_data, 0600, mxt_t38_data_show, mxt_t38_data_store);
 
 static struct attribute *mxt_attrs[] = {
 	&dev_attr_fw_version.attr,
@@ -4051,6 +4152,7 @@ static struct attribute *mxt_attrs[] = {
 	&dev_attr_debug_notify.attr,
 	&dev_attr_t25.attr,
 	&dev_attr_touch_dev_stat.attr,
+	&dev_attr_t38_data.attr,
 	NULL
 };
 
-- 
2.19.2


  parent reply	other threads:[~2019-09-17  9:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-17  9:43 [PATCH v3 44/49] Input: Atmel: use T44 object to process T5 messages Jiada Wang
2019-09-17  9:43 ` [PATCH v3 45/49] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2019-09-17  9:43 ` [PATCH v3 46/49] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2019-09-17  9:43 ` Jiada Wang [this message]
2019-09-17  9:43 ` [PATCH v3 48/49] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190917094319.18996-4-jiada_wang@mentor.com \
    --to=jiada_wang@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).