From: Marco Felsch <m.felsch@pengutronix.de>
To: support.opensource@diasemi.com, lee.jones@linaro.org,
robh+dt@kernel.org, lgirdwood@gmail.com, broonie@kernel.org,
stwiss.opensource@diasemi.com
Cc: kernel@pengutronix.de, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] dt-bindings: mfd: da9062: add regulator gpio enable/disable documentation
Date: Tue, 17 Sep 2019 14:42:45 +0200 [thread overview]
Message-ID: <20190917124246.11732-5-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20190917124246.11732-1-m.felsch@pengutronix.de>
At the gpio-based regulator enable/disable documentation. This property
can be applied to each subnode within the 'regulators' node so each
regulator can be configured differently.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Documentation/devicetree/bindings/mfd/da9062.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index 9d9820d8177d..3d4b90bf8ea6 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -75,6 +75,13 @@ Sub-nodes:
same. Also the gpio phandle must refer to to the dlg,da9062-gpio device
other gpios are not allowed and make no sense.
+ - dlg,ena-sense-gpios : The GPIO reference which should be used by the
+ regulator to enable/disable the output. If the signal is active the
+ regulator is on else it is off. Attention: Sharing the same gpio for other
+ purposes or across multiple regulators is possible but the gpio settings
+ must be the same. Also the gpio phandle must refer to to the
+ dlg,da9062-gpio device other gpios are not allowed and make no sense.
+
- rtc : This node defines settings required for the Real-Time Clock associated
with the DA9062. There are currently no entries in this binding, however
compatible = "dlg,da9062-rtc" should be added if a node is created.
--
2.20.1
next prev parent reply other threads:[~2019-09-17 12:43 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 12:42 [PATCH 0/5] DA9062 PMIC fixes and features Marco Felsch
2019-09-17 12:42 ` [PATCH 1/5] regulator: da9062: fix suspend_enable/disable preparation Marco Felsch
2019-09-18 12:41 ` Adam Thomson
2019-09-18 15:05 ` Marco Felsch
2019-09-23 16:03 ` Adam Thomson
2019-09-23 22:02 ` Marco Felsch
2019-09-24 8:58 ` Adam Thomson
2019-09-23 21:23 ` Applied "regulator: da9062: fix suspend_enable/disable preparation" to the regulator tree Mark Brown
2019-09-17 12:42 ` [PATCH 2/5] dt-bindings: mfd: da9062: add regulator voltage selection documentation Marco Felsch
2019-09-24 9:23 ` Adam Thomson
2019-09-25 15:51 ` Marco Felsch
2019-09-25 16:18 ` Adam Thomson
2019-09-26 8:09 ` Marco Felsch
2019-09-26 10:17 ` Adam Thomson
2019-09-26 11:43 ` Marco Felsch
2019-09-26 14:04 ` Adam Thomson
2019-09-26 14:38 ` Marco Felsch
2019-09-30 9:53 ` Adam Thomson
2019-10-02 13:45 ` Marco Felsch
2019-10-22 10:22 ` Marco Felsch
2019-09-17 12:42 ` [PATCH 3/5] regulator: da9062: add voltage selection gpio support Marco Felsch
2019-09-17 14:22 ` kbuild test robot
2019-09-17 14:34 ` Marco Felsch
2019-09-24 9:48 ` Adam Thomson
2019-09-25 15:59 ` Marco Felsch
2019-10-04 19:41 ` Linus Walleij
2019-10-07 8:59 ` Marco Felsch
2019-09-17 12:42 ` Marco Felsch [this message]
2019-09-17 12:42 ` [PATCH 5/5] regulator: da9062: add gpio based regulator dis-/enable support Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917124246.11732-5-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).