From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Matthew Wilcox <willy@infradead.org>,
"David S . Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
netdev@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH -net] staging: octeon: se "(uintptr_t)" to cast from pointer to int
Date: Thu, 19 Sep 2019 11:25:26 +0200 [thread overview]
Message-ID: <20190919092526.27564-1-geert@linux-m68k.org> (raw)
On 32-bit:
In file included from drivers/staging/octeon/octeon-ethernet.h:41,
from drivers/staging/octeon/ethernet-tx.c:25:
drivers/staging/octeon/octeon-stubs.h: In function ‘cvmx_phys_to_ptr’:
drivers/staging/octeon/octeon-stubs.h:1205:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
return (void *)(physical_address);
^
drivers/staging/octeon/ethernet-tx.c: In function ‘cvm_oct_xmit’:
drivers/staging/octeon/ethernet-tx.c:264:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
^
drivers/staging/octeon/octeon-stubs.h:2:30: note: in definition of macro ‘XKPHYS_TO_PHYS’
#define XKPHYS_TO_PHYS(p) (p)
^
drivers/staging/octeon/ethernet-tx.c:268:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
^
drivers/staging/octeon/octeon-stubs.h:2:30: note: in definition of macro ‘XKPHYS_TO_PHYS’
#define XKPHYS_TO_PHYS(p) (p)
^
drivers/staging/octeon/ethernet-tx.c:276:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
XKPHYS_TO_PHYS((u64)skb_frag_address(fs));
^
drivers/staging/octeon/octeon-stubs.h:2:30: note: in definition of macro ‘XKPHYS_TO_PHYS’
#define XKPHYS_TO_PHYS(p) (p)
^
drivers/staging/octeon/ethernet-tx.c:280:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
^
drivers/staging/octeon/octeon-stubs.h:2:30: note: in definition of macro ‘XKPHYS_TO_PHYS’
#define XKPHYS_TO_PHYS(p) (p)
^
Fix this by replacing casts to "u64" by casts to "uintptr_t", which is
either 32-bit or 64-bit, and adding an intermediate cast to "uintptr_t"
where needed.
Exposed by commit 171a9bae68c72f2d ("staging/octeon: Allow test build on
!MIPS").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/staging/octeon/ethernet-tx.c | 9 +++++----
drivers/staging/octeon/octeon-stubs.h | 2 +-
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index c64728fc21f229d8..7021ff07ba2a0b70 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -261,11 +261,11 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
/* Build the PKO buffer pointer */
hw_buffer.u64 = 0;
if (skb_shinfo(skb)->nr_frags == 0) {
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
hw_buffer.s.pool = 0;
hw_buffer.s.size = skb->len;
} else {
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
hw_buffer.s.pool = 0;
hw_buffer.s.size = skb_headlen(skb);
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
@@ -273,11 +273,12 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
skb_frag_t *fs = skb_shinfo(skb)->frags + i;
hw_buffer.s.addr =
- XKPHYS_TO_PHYS((u64)skb_frag_address(fs));
+ XKPHYS_TO_PHYS((uintptr_t)skb_frag_address(fs));
hw_buffer.s.size = skb_frag_size(fs);
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+ hw_buffer.s.addr =
+ XKPHYS_TO_PHYS((uintptr_t)CVM_OCT_SKB_CB(skb));
hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
pko_command.s.gather = 1;
diff --git a/drivers/staging/octeon/octeon-stubs.h b/drivers/staging/octeon/octeon-stubs.h
index a4ac3bfb62a85e65..b78ce9eaab85d310 100644
--- a/drivers/staging/octeon/octeon-stubs.h
+++ b/drivers/staging/octeon/octeon-stubs.h
@@ -1202,7 +1202,7 @@ static inline int cvmx_wqe_get_grp(cvmx_wqe_t *work)
static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
{
- return (void *)(physical_address);
+ return (void *)(uintptr_t)(physical_address);
}
static inline uint64_t cvmx_ptr_to_phys(void *ptr)
--
2.17.1
reply other threads:[~2019-09-19 9:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919092526.27564-1-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=davem@davemloft.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).