From: Anson Huang <Anson.Huang@nxp.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V2] gpio: mxc: Only getting second IRQ when there is more than one IRQ
Date: Thu, 19 Sep 2019 17:39:17 +0800 [thread overview]
Message-ID: <1568885957-2968-1-git-send-email-Anson.Huang@nxp.com> (raw)
On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each
GPIO bank, so it is better to check the IRQ count before getting
second IRQ to avoid below error message during probe:
[ 1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[ 1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found
[ 1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found
[ 1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found
[ 1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found
[ 1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found
[ 1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found
[ 1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
- use local variable irq_count instead or err to avoid confusion.
---
drivers/gpio/gpio-mxc.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 7907a87..c77d474 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -411,6 +411,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
+ int irq_count;
int irq_base;
int err;
@@ -426,9 +427,15 @@ static int mxc_gpio_probe(struct platform_device *pdev)
if (IS_ERR(port->base))
return PTR_ERR(port->base);
- port->irq_high = platform_get_irq(pdev, 1);
- if (port->irq_high < 0)
- port->irq_high = 0;
+ irq_count = platform_irq_count(pdev);
+ if (irq_count < 0)
+ return irq_count;
+
+ if (irq_count > 1) {
+ port->irq_high = platform_get_irq(pdev, 1);
+ if (port->irq_high < 0)
+ port->irq_high = 0;
+ }
port->irq = platform_get_irq(pdev, 0);
if (port->irq < 0)
--
2.7.4
next reply other threads:[~2019-09-19 9:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 9:39 Anson Huang [this message]
2019-09-19 14:16 ` [PATCH V2] gpio: mxc: Only getting second IRQ when there is more than one IRQ Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568885957-2968-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).