[PATCH 09/13] platform: chrome: sensorhub: Add median filter

From: Gwendal Grignou <gwendal@chromium.org>
To: jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
	pmeerw@pmeerw.net, lee.jones@linaro.org, bleung@chromium.org,
	enric.balletbo@collabora.com, dianders@chromium.org,
	groeck@chromium.org, fabien.lahoudere@collabora.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	Gwendal Grignou <gwendal@chromium.org>
Subject: [PATCH 09/13] platform: chrome: sensorhub: Add median filter
Date: Sun, 22 Sep 2019 10:50:17 -0700	[thread overview]
Message-ID: <20190922175021.53449-10-gwendal@chromium.org> (raw)
In-Reply-To: <20190922175021.53449-1-gwendal@chromium.org>

Events are timestamped in EC time space, their timestamps need to be
converted in host time space.
The assumption is the time delta between when the interrupt is sent
by the EC and when it is receive by the host is a [small] constant.
This is not always true, even with hard-wired interrupt. To mitigate
worst offenders, add a median filter to weed out bigger than expected
delays.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 .../platform/chrome/cros_ec_sensorhub_ring.c  | 485 +++++++++++++++++-
 .../linux/platform_data/cros_ec_sensorhub.h   |  65 +++
 2 files changed, 533 insertions(+), 17 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_sensorhub_ring.c b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
index 48327e80a5a3..9955c80d0907 100644
--- a/drivers/platform/chrome/cros_ec_sensorhub_ring.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -69,9 +69,11 @@ int cros_ec_sensorhub_ring_fifo_toggle(
 		struct cros_ec_sensorhub *sensorhub,
 		bool on)
 {
-	int ret;
+	int ret, i;
 
 	mutex_lock(&sensorhub->cmd_lock);
+	for (i = 0; i < CROS_EC_SENSOR_MAX; i++)
+		sensorhub->last_batch_len[i] = 0;
 	sensorhub->params->cmd = MOTIONSENSE_CMD_FIFO_INT_ENABLE;
 	sensorhub->params->fifo_int_enable.enable = on;
 
@@ -86,6 +88,227 @@ int cros_ec_sensorhub_ring_fifo_toggle(
 	return ret;
 }
 
+static int cros_ec_ring_median_cmp(const void *pv1, const void *pv2)
+{
+	s64 v1 = *(s64 *)pv1;
+	s64 v2 = *(s64 *)pv2;
+
+	if (v1 > v2)
+		return 1;
+	else if (v1 < v2)
+		return -1;
+	else
+		return 0;
+}
+
+/*
+ * cros_ec_ring_median: Gets median of an array of numbers
+ *
+ * For now it's implemented using an inefficient > O(n) sort then return
+ * the middle element. A more optimal method would be something like
+ * quickselect, but given that n = 64 we can probably live with it in the
+ * name of clarity.
+ *
+ * Warning: the input array gets modified (sorted)!
+ */
+static s64 cros_ec_ring_median(s64 *array, size_t length)
+{
+	sort(array, length, sizeof(s64), cros_ec_ring_median_cmp, NULL);
+	return array[length / 2];
+}
+
+/*
+ * IRQ Timestamp Filtering
+ *
+ * Lower down in cros_ec_ring_process_event(), for each sensor event we have to
+ * calculate it's timestamp in the AP timebase. There are 3 time points:
+ *   a - EC timebase, sensor event
+ *   b - EC timebase, IRQ
+ *   c - AP timebase, IRQ
+ *   a' - what we want: sensor even in AP timebase
+ *
+ * While a and b are recorded at accurate times (due to the EC real time
+ * nature); c is pretty untrustworthy, even though it's recorded the
+ * first thing in ec_irq_handler(). There is a very good change we'll get
+ * added lantency due to:
+ *   other irqs
+ *   ddrfreq
+ *   cpuidle
+ *
+ * Normally a' = c - b + a, but if we do that naive math any jitter in c
+ * will get coupled in a', which we don't want. We want a function
+ * a' = cros_ec_ring_ts_filter(a) which will filter out outliers in c.
+ *
+ * Think of a graph of AP time(b) on the y axis vs EC time(c) on the x axis.
+ * The slope of the line won't be exactly 1, there will be some clock drift
+ * between the 2 chips for various reasons (mechanical stress, temperature,
+ * voltage). We need to extrapolate values for a future x, without trusting
+ * recent y values too much.
+ *
+ * We use a median filter for the slope, then another median filter for the
+ * y-intercept to calculate this function:
+ *   dx[n] = x[n-1] - x[n]
+ *   dy[n] = x[n-1] - x[n]
+ *   m[n] = dy[n] / dx[n]
+ *   median_m = median(m[n-k:n])
+ *   error[i] = y[n-i] - median_m * x[n-i]
+ *   median_error = median(error[:k])
+ *   predicted_y = median_m * x + median_error
+ *
+ * Implementation differences from above:
+ * - Redefined y to be actually c - b, this gives us a lot more precision
+ * to do the math. (c-b)/b variations are more obvious than c/b variations.
+ * - Since we don't have floating point, any operations involving slope are
+ * done using fixed point math (*M_PRECISION)
+ * - Since x and y grow with time, we keep zeroing the graph (relative to
+ * the last sample), this way math involving *x[n-i] will not overflow
+ * - EC timestamps are kept in us, it improves the slope calculation precision
+ */
+
+/*
+ * cros_ec_ring_ts_filter_update: Given a new IRQ timestamp pair (EC and
+ * AP timebases), add it to the filter history.
+ *
+ * @b IRQ timestamp, EC timebase (us)
+ * @c IRQ timestamp, AP timebase (ns)
+ */
+static void cros_ec_ring_ts_filter_update(
+			struct cros_ec_sensors_ts_filter_state *state,
+			s64 b, s64 c)
+{
+	s64 x, y;
+	s64 dx, dy;
+	s64 m; /* stored as *M_PRECISION */
+	s64 *m_history_copy = state->temp_buf;
+	s64 *error = state->temp_buf;
+	int i;
+
+	/* we trust b the most, that'll be our independent variable */
+	x = b;
+	/* y is the offset between AP and EC times, in ns */
+	y = c - b * 1000;
+
+	dx = (state->x_history[0] + state->x_offset) - x;
+	if (dx == 0)
+		return; /* we already have this irq in the history */
+	dy = (state->y_history[0] + state->y_offset) - y;
+	m = div64_s64(dy * M_PRECISION, dx);
+
+	/* Empty filter if we haven't seen any action in a while. */
+	if (-dx > TS_HISTORY_BORED_US)
+		state->history_len = 0;
+
+	/* Move everything over, also update offset to all absolute coords .*/
+	for (i = state->history_len - 1; i >= 1; i--) {
+		state->x_history[i] = state->x_history[i-1] + dx;
+		state->y_history[i] = state->y_history[i-1] + dy;
+
+		state->m_history[i] = state->m_history[i-1];
+		/*
+		 * Also use the same loop to copy m_history for future
+		 * median extraction.
+		 */
+		m_history_copy[i] = state->m_history[i-1];
+	}
+
+	/* Store the x and y, but remember offset is actually last sample. */
+	state->x_offset = x;
+	state->y_offset = y;
+	state->x_history[0] = 0;
+	state->y_history[0] = 0;
+
+	state->m_history[0] = m;
+	m_history_copy[0] = m;
+
+	if (state->history_len < TS_HISTORY_SIZE)
+		state->history_len++;
+
+	/* Precalculate things for the filter. */
+	if (state->history_len > TS_HISTORY_THRESHOLD) {
+		state->median_m =
+		    cros_ec_ring_median(m_history_copy, state->history_len - 1);
+
+		/*
+		 * Calculate y-intercepts as if m_median is the slope and
+		 * points in the history are on the line. median_error will
+		 * still be in the offset coordinate system.
+		 */
+		for (i = 0; i < state->history_len; i++)
+			error[i] = state->y_history[i] -
+				div_s64(state->median_m * state->x_history[i],
+					M_PRECISION);
+		state->median_error =
+			cros_ec_ring_median(error, state->history_len);
+	} else {
+		state->median_m = 0;
+		state->median_error = 0;
+	}
+}
+
+/*
+ * cros_ec_ring_ts_filter: Translate EC timebase timestamp to AP timebase
+ *
+ * @x any ec timestamp (us):
+ *
+ * cros_ec_ring_ts_filter(a) => a' event timestamp, AP timebase
+ * cros_ec_ring_ts_filter(b) => calculated timestamp when the EC IRQ
+ *                           should have happened on the AP, with low jitter
+ *
+ * @returns timestamp in AP timebase (ns)
+ *
+ * Note: The filter will only activate once state->history_len goes
+ * over TS_HISTORY_THRESHOLD. Otherwise it'll just do the naive c - b + a
+ * transform.
+ *
+ * How to derive the formula, starting from:
+ *   f(x) = median_m * x + median_error
+ * That's the calculated AP - EC offset (at the x point in time)
+ * Undo the coordinate system transform:
+ *   f(x) = median_m * (x - x_offset) + median_error + y_offset
+ * Remember to undo the "y = c - b * 1000" modification:
+ *   f(x) = median_m * (x - x_offset) + median_error + y_offset + x * 1000
+ */
+static s64 cros_ec_ring_ts_filter(struct cros_ec_sensors_ts_filter_state *state,
+				  s64 x)
+{
+	return div_s64(state->median_m * (x - state->x_offset), M_PRECISION)
+	       + state->median_error + state->y_offset + x * 1000;
+}
+
+/*
+ * Since a and b were originally 32 bit values from the EC,
+ * they overflow relatively often, casting is not enough, so we need to
+ * add an offset.
+ */
+static void cros_ec_ring_fix_overflow(s64 *ts,
+		const s64 overflow_period,
+		struct cros_ec_sensors_ec_overflow_state *state)
+{
+	s64 adjust;
+
+	*ts += state->offset;
+	if (abs(state->last - *ts) > (overflow_period / 2)) {
+		adjust = state->last > *ts ? overflow_period : -overflow_period;
+		state->offset += adjust;
+		*ts += adjust;
+	}
+	state->last = *ts;
+}
+
+static void cros_ec_ring_check_for_past_timestamp(
+				struct cros_ec_sensorhub *sensorhub,
+				struct cros_ec_sensors_ring_sample *sample)
+{
+	const u8 sensor_id = sample->sensor_id;
+
+	// if this event is earlier than one we saw before...
+	if (sensorhub->newest_sensor_event[sensor_id] > sample->timestamp)
+		// mark it for spreading
+		sample->timestamp = sensorhub->last_batch_timestamp[sensor_id];
+	else
+		sensorhub->newest_sensor_event[sensor_id] = sample->timestamp;
+}
+
 /*
  * cros_ec_ring_process_event: process one EC FIFO event
  *
@@ -117,25 +340,47 @@ static bool cros_ec_ring_process_event(
 		s64 a = in->timestamp;
 		s64 b = fifo_info->info.timestamp;
 		s64 c = fifo_timestamp;
-		s64 new_timestamp;
 
+		cros_ec_ring_fix_overflow(&a, 1LL << 32,
+				&sensorhub->overflow_a);
+		cros_ec_ring_fix_overflow(&b, 1LL << 32,
+				&sensorhub->overflow_b);
+
+		if (sensorhub->tight_timestamps) {
+			cros_ec_ring_ts_filter_update(&sensorhub->filter, b, c);
+			*current_timestamp =
+				cros_ec_ring_ts_filter(&sensorhub->filter, a);
+		} else {
+			s64 new_timestamp;
+			/*
+			 * disable filtering since we might add more jitter
+			 * if b is in a random point in time
+			 */
+			new_timestamp = c - b * 1000 + a * 1000;
+			/*
+			 * The timestamp can be stale if we had to use the fifo
+			 * info timestamp.
+			 */
+			if (new_timestamp - *current_timestamp > 0)
+				*current_timestamp = new_timestamp;
+		}
+	}
+
+	if (in->flags & MOTIONSENSE_SENSOR_FLAG_ODR) {
+		sensorhub->last_batch_len[in->sensor_num] =
+			sensorhub->penultimate_batch_len[in->sensor_num] = 0;
 		/*
-		 * disable filtering since we might add more jitter
-		 * if b is in a random point in time
-		 */
-		new_timestamp = c - b * 1000 + a * 1000;
-		/*
-		 * The timestamp can be stale if we had to use the fifo
-		 * info timestamp.
+		 * ODR change is only useful for the sensor_ring, it does not
+		 * convey information to clients.
 		 */
-		if (new_timestamp - *current_timestamp > 0)
-			*current_timestamp = new_timestamp;
+		return false;
 	}
 
 	if (in->flags & MOTIONSENSE_SENSOR_FLAG_FLUSH) {
 		out->sensor_id = in->sensor_num;
 		out->timestamp = *current_timestamp;
 		out->flag = in->flags;
+		sensorhub->last_batch_len[out->sensor_id] = 0;
 		/*
 		 * No other payload information provided with
 		 * flush ack.
@@ -149,7 +394,22 @@ static bool cros_ec_ring_process_event(
 	/* Regular sample */
 	out->sensor_id = in->sensor_num;
 	if (*current_timestamp - now > 0) {
-		/* If the timestamp is in the future. */
+		/*
+		 * This fix is needed to overcome the timestamp filter putting
+		 * events in the future.
+		 */
+		sensorhub->future_timestamp_total_ns +=
+			*current_timestamp - now;
+		if (++sensorhub->future_timestamp_count ==
+				FUTURE_TS_ANALYTICS_COUNT_MAX) {
+			s64 avg = div_s64(sensorhub->future_timestamp_total_ns,
+					sensorhub->future_timestamp_count);
+			dev_warn(sensorhub->dev,
+					"100 timestamps in the future, %lldns shaved on average\n",
+					avg);
+			sensorhub->future_timestamp_count = 0;
+			sensorhub->future_timestamp_total_ns = 0;
+		}
 		out->timestamp = now;
 	} else {
 		out->timestamp = *current_timestamp;
@@ -157,13 +417,195 @@ static bool cros_ec_ring_process_event(
 	out->flag = in->flags;
 	for (axis = 0; axis < 3; axis++)
 		out->vector[axis] = in->data[axis];
+	if (sensorhub->tight_timestamps)
+		cros_ec_ring_check_for_past_timestamp(sensorhub, out);
 	return true;
 }
 
 /*
- * cros_ec_ring_spread_add: Calculate proper timestamps then
+ * cros_ec_ring_spread_add: Calculate proper timestamps then add to ringbuffer.
+ *
+ * Note: This is the new spreading code, assumes every sample's timestamp
+ * preceeds the sample. Run if tight_timestamps == true.
+ *
+ * Sometimes the EC receives only one interrupt (hence timestamp) for
+ * a batch of samples. Only the first sample will have the correct
+ * timestamp. So we must interpolate the other samples.
+ * We use the previous batch timestamp and our current batch timestamp
+ * as a way to calculate period, then spread the samples evenly.
+ *
+ * s0 int, 0ms
+ * s1 int, 10ms
+ * s2 int, 20ms
+ * 30ms point goes by, no interrupt, previous one is still asserted
+ * downloading s2 and s3
+ * s3 sample, 20ms (incorrect timestamp)
+ * s4 int, 40ms
+ *
+ * The batches are [(s0), (s1), (s2, s3), (s4)]. Since the 3rd batch
+ * has 2 samples in them, we adjust the timestamp of s3.
+ * s2 - s1 = 10ms, so s3 must be s2 + 10ms => 20ms. If s1 would have
+ * been part of a bigger batch things would have gotten a little
+ * more complicated.
+ *
+ * Note: we also assume another sensor sample doesn't break up a batch
+ * in 2 or more partitions. Example, there can't ever be a sync sensor
+ * in between S2 and S3. This simplifies the following code.
+ */
+static void cros_ec_ring_spread_add(
+				struct cros_ec_sensorhub *sensorhub,
+				unsigned long sensor_mask,
+				struct cros_ec_sensors_ring_sample *last_out)
+{
+	struct cros_ec_sensors_ring_sample *batch_start, *next_batch_start;
+	int id;
+
+	for_each_set_bit(id, &sensor_mask, BITS_PER_LONG) {
+		for (batch_start = sensorhub->ring; batch_start < last_out;
+		     batch_start = next_batch_start) {
+			/*
+			 * For each batch (where all samples have the same
+			 * timestamp).
+			 */
+			int batch_len, sample_idx;
+			struct cros_ec_sensors_ring_sample *batch_end =
+				batch_start;
+			struct cros_ec_sensors_ring_sample *s;
+			s64 batch_timestamp = batch_start->timestamp;
+			s64 sample_period;
+
+			/*
+			 * Skip over batches that start with the sensor types
+			 * we're not looking at right now.
+			 */
+			if (batch_start->sensor_id != id) {
+				next_batch_start = batch_start + 1;
+				continue;
+			}
+
+			/*
+			 * TODO(gwendal): can not send out flush packets
+			 * anymore.
+			 * Do not start a batch
+			 * from a flush, as it happens asynchronously to the
+			 * regular flow of events.
+			 */
+			if (batch_start->flag &
+				MOTIONSENSE_SENSOR_FLAG_FLUSH) {
+				next_batch_start = batch_start + 1;
+				continue;
+			}
+
+			if (batch_start->timestamp <=
+				sensorhub->last_batch_timestamp[id]) {
+
+				batch_timestamp =
+					sensorhub->last_batch_timestamp[id];
+				batch_len = sensorhub->last_batch_len[id];
+
+				sample_idx = batch_len;
+
+				sensorhub->last_batch_timestamp[id] =
+				  sensorhub->penultimate_batch_timestamp[id];
+				sensorhub->last_batch_len[id] =
+				  sensorhub->penultimate_batch_len[id];
+			} else {
+				/*
+				 * Push first sample in the batch to the,
+				 * kifo, it's guaranteed to be correct, the
+				 * rest will follow later on.
+				 */
+				sample_idx = batch_len = 1;
+				cros_sensorhub_send_sample(
+						sensorhub, batch_start);
+				batch_start++;
+			}
+
+			/* Find all samples have the same timestamp. */
+			for (s = batch_start; s < last_out; s++) {
+				if (s->sensor_id != id)
+					/*
+					 * Skip over other sensor types that
+					 * are interleaved, don't count them.
+					 */
+					continue;
+				if (s->timestamp != batch_timestamp)
+					/* we discovered the next batch */
+					break;
+				if (s->flag & MOTIONSENSE_SENSOR_FLAG_FLUSH)
+					/* break on flush packets */
+					break;
+				batch_end = s;
+				batch_len++;
+			}
+
+			if (batch_len == 1)
+				goto done_with_this_batch;
+
+			/* Can we calculate period? */
+			if (sensorhub->last_batch_len[id] == 0) {
+				dev_warn(sensorhub->dev, "Sensor %d: lost %d samples when spreading\n",
+						id, batch_len - 1);
+				goto done_with_this_batch;
+				/*
+				 * Note: we're dropping the rest of the samples
+				 * in this batch since we have no idea where
+				 * they're supposed to go without a period
+				 * calculation.
+				 */
+			}
+
+			sample_period = div_s64(batch_timestamp -
+					sensorhub->last_batch_timestamp[id],
+					sensorhub->last_batch_len[id]);
+			dev_dbg(sensorhub->dev,
+					"Adjusting %d samples, sensor %d last_batch @%lld (%d samples) batch_timestamp=%lld => period=%lld\n",
+					batch_len, id,
+					sensorhub->last_batch_timestamp[id],
+					sensorhub->last_batch_len[id],
+					batch_timestamp,
+					sample_period);
+
+			/*
+			 * Adjust timestamps of the samples then push them to
+			 * kfifo.
+			 */
+			for (s = batch_start; s <= batch_end; s++) {
+				if (s->sensor_id != id)
+					/*
+					 * Skip over other sensor types that
+					 * are interleaved, don't change them.
+					 */
+					continue;
+
+				s->timestamp = batch_timestamp +
+					sample_period * sample_idx;
+				sample_idx++;
+
+				cros_sensorhub_send_sample(sensorhub, s);
+			}
+
+done_with_this_batch:
+			sensorhub->penultimate_batch_timestamp[id] =
+				sensorhub->last_batch_timestamp[id];
+			sensorhub->penultimate_batch_len[id] =
+				sensorhub->last_batch_len[id];
+
+			sensorhub->last_batch_timestamp[id] = batch_timestamp;
+			sensorhub->last_batch_len[id] = batch_len;
+
+			next_batch_start = batch_end + 1;
+		}
+	}
+}
+
+/*
+ * cros_ec_ring_spread_add_legacy: Calculate proper timestamps then
  * add to ringbuffer (legacy).
  *
+ * Note: This assumes we're running old firmware, where every sample's timestamp
+ * is after the sample. Run if tight_timestamps == false.
+ *
  * If there is a sample with a proper timestamp
  *                        timestamp | count
  * older_unprocess_out --> TS1      | 1
@@ -181,7 +623,7 @@ static bool cros_ec_ring_process_event(
  * out -->                 TS1      | 3
  * We know have [TS1+1/3, TS1+2/3, current timestamp]
  */
-static void cros_ec_ring_spread_add(
+static void cros_ec_ring_spread_add_legacy(
 				struct cros_ec_sensorhub *sensorhub,
 				unsigned long sensor_mask,
 				s64 current_timestamp,
@@ -355,7 +797,8 @@ static void cros_ec_sensorhub_ring_handler(struct cros_ec_sensorhub *sensorhub)
 	 * the AP is slow to respond to the IRQ, the EC may have added new
 	 * samples. Use the FIFO info timestamp as last timestamp then.
 	 */
-	if ((last_out-1)->timestamp == current_timestamp)
+	if (!sensorhub->tight_timestamps &&
+	    (last_out-1)->timestamp == current_timestamp)
 		current_timestamp = fifo_timestamp;
 
 	/* Warn on lost samples. */
@@ -367,6 +810,7 @@ static void cros_ec_sensorhub_ring_handler(struct cros_ec_sensorhub *sensorhub)
 				dev_warn(sensorhub->dev,
 					"Sensor %d: lost: %d out of %d\n", i,
 					lost, fifo_info->info.total_lost);
+				sensorhub->last_batch_len[i] = 0;
 			}
 		}
 	}
@@ -374,8 +818,11 @@ static void cros_ec_sensorhub_ring_handler(struct cros_ec_sensorhub *sensorhub)
 	/*
 	 * Spread samples in case of batching, then add them to the ringbuffer.
 	 */
-	cros_ec_ring_spread_add(sensorhub, sensor_mask,
-			current_timestamp, last_out);
+	if (sensorhub->tight_timestamps)
+		cros_ec_ring_spread_add(sensorhub, sensor_mask, last_out);
+	else
+		cros_ec_ring_spread_add_legacy(sensorhub, sensor_mask,
+					       current_timestamp, last_out);
 
 ring_handler_end:
 	sensorhub->fifo_timestamp[LAST_TS] = current_timestamp;
@@ -436,6 +883,10 @@ int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub)
 
 	sensorhub->fifo_timestamp[LAST_TS] = cros_ec_get_time_ns();
 
+	sensorhub->tight_timestamps = cros_ec_check_features(ec,
+		EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS);
+
+
 	/* register the notifier that will act as a top half interrupt. */
 	sensorhub->notifier.notifier_call = cros_ec_sensorhub_event;
 	ret = blocking_notifier_chain_register(&ec->ec_dev->event_notifier,
diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h
index 18cda568c58a..df67f2015da9 100644
--- a/include/linux/platform_data/cros_ec_sensorhub.h
+++ b/include/linux/platform_data/cros_ec_sensorhub.h
@@ -53,6 +53,42 @@ struct cros_ec_sensors_ring_sample {
 	s64      timestamp;
 } __packed;
 
+/* State used for cros_ec_ring_fix_overflow */
+struct cros_ec_sensors_ec_overflow_state {
+	s64 offset;
+	s64 last;
+};
+
+/* Precision of fixed point for the m values from the filter */
+#define M_PRECISION (1 << 23)
+
+/* Length of the filter, how long to remember entries for */
+#define TS_HISTORY_SIZE 64
+
+/* Only activate the filter once we have at least this many elements. */
+#define TS_HISTORY_THRESHOLD 8
+
+/*
+ * If we don't have any history entries for this long, empty the filter to
+ * make sure there are no big discontinuities.
+ */
+#define TS_HISTORY_BORED_US 500000
+
+struct cros_ec_sensors_ts_filter_state {
+	s64 x_offset, y_offset;
+	s64 x_history[TS_HISTORY_SIZE]; /* stored relative to x_offset */
+	s64 y_history[TS_HISTORY_SIZE]; /* stored relative to y_offset */
+	s64 m_history[TS_HISTORY_SIZE]; /* stored as *M_PRECISION */
+	int history_len;
+
+	s64 temp_buf[TS_HISTORY_SIZE];
+
+	s64 median_m;
+	s64 median_error;
+};
+
+#define FUTURE_TS_ANALYTICS_COUNT_MAX 100
+
 /**
  * struct cros_ec_sensorhub - Sensor Hub device data.
  */
@@ -76,6 +112,35 @@ struct cros_ec_sensorhub {
 	struct cros_ec_fifo_info fifo_info;
 	int    fifo_size;
 
+	/* Used for timestamp spreading calculations when a batch shows up */
+	s64 penultimate_batch_timestamp[CROS_EC_SENSOR_MAX];
+	int penultimate_batch_len[CROS_EC_SENSOR_MAX];
+	s64 last_batch_timestamp[CROS_EC_SENSOR_MAX];
+	int last_batch_len[CROS_EC_SENSOR_MAX];
+	s64 newest_sensor_event[CROS_EC_SENSOR_MAX];
+
+	struct cros_ec_sensors_ec_overflow_state overflow_a;
+	struct cros_ec_sensors_ec_overflow_state overflow_b;
+
+	struct cros_ec_sensors_ts_filter_state filter;
+
+	/*
+	 * The timestamps reported from the EC have low jitter.
+	 * Timestamps also come before every sample.
+	 * Set either by feature bits coming from the EC or userspace.
+	 */
+	bool tight_timestamps;
+
+	/*
+	 * Statistics used to compute shaved time. This occures when
+	 * timestamp interpolation from EC time to AP time accidentally
+	 * puts timestamps in the future. These timestamps are clamped
+	 * to `now` and these count/total_ns maintain the statistics for
+	 * how much time was removed in a given period..
+	 */
+	s32 future_timestamp_count;
+	s64 future_timestamp_total_ns;
+
 	/*
 	 * Dynamic array to be able to spread datum to iio sensor objects.
 	 */
-- 
2.23.0.351.gc4317032e6-goog

