From: <Tudor.Ambarus@microchip.com>
To: <vigneshr@ti.com>, <boris.brezillon@collabora.com>,
<marek.vasut@gmail.com>, <linux-mtd@lists.infradead.org>,
<geert+renesas@glider.be>, <jonas@norrbonn.se>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<miquel.raynal@bootlin.com>, <richard@nod.at>, <joel@jms.id.au>,
<andrew@aj.id.au>, <matthias.bgg@gmail.com>, <vz@mleia.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<Tudor.Ambarus@microchip.com>
Subject: [PATCH v2 21/22] mtd: spi-nor: Update sr2_bit7_quad_enable()
Date: Tue, 24 Sep 2019 07:47:00 +0000 [thread overview]
Message-ID: <20190924074533.6618-22-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190924074533.6618-1-tudor.ambarus@microchip.com>
From: Tudor Ambarus <tudor.ambarus@microchip.com>
Rename the method to spi_nor_sr2_bit7_quad_enable(). Do the
read back test on all the eight bits of the Status Register,
not just the QE one.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 8fd1c04f75d9..a53e2cdc564c 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2038,7 +2038,7 @@ static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
}
/**
- * sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
* @nor: pointer to a 'struct spi_nor'
*
* Set the Quad Enable (QE) bit in the Status Register 2.
@@ -2049,10 +2049,11 @@ static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
*
* Return: 0 on success, -errno otherwise.
*/
-static int sr2_bit7_quad_enable(struct spi_nor *nor)
+static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
{
u8 *sr2 = nor->bouncebuf;
int ret;
+ u8 sr2_written;
/* Check current Quad Enable bit value. */
ret = spi_nor_read_sr2(nor, sr2);
@@ -2069,13 +2070,15 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
if (ret)
return ret;
+ sr2_written = *sr2;
+
/* Read back and check it. */
ret = spi_nor_read_sr2(nor, sr2);
if (ret)
return ret;
- if (!(*sr2 & SR2_QUAD_EN_BIT7)) {
- dev_err(nor->dev, "SR2 Quad bit not set\n");
+ if (*sr2 != sr2_written) {
+ dev_err(nor->dev, "Read back test failed\n");
return -EIO;
}
@@ -3649,7 +3652,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
case BFPT_DWORD15_QER_SR2_BIT7:
nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- flash->quad_enable = sr2_bit7_quad_enable;
+ flash->quad_enable = spi_nor_sr2_bit7_quad_enable;
break;
case BFPT_DWORD15_QER_SR2_BIT1:
--
2.9.5
next prev parent reply other threads:[~2019-09-24 7:47 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-24 7:45 [PATCH v2 00/22] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus
2019-09-24 7:45 ` [PATCH v2 01/22] mtd: spi-nor: hisi-sfc: Drop nor->erase NULL assignment Tudor.Ambarus
2019-10-10 6:49 ` Boris Brezillon
2019-10-23 21:24 ` Tudor.Ambarus
2019-09-24 7:45 ` [PATCH v2 02/22] mtd: spi-nor: Introduce 'struct spi_nor_controller_ops' Tudor.Ambarus
2019-10-10 6:51 ` Boris Brezillon
2019-10-23 21:24 ` Tudor.Ambarus
2019-09-24 7:45 ` [PATCH v2 03/22] mtd: spi-nor: cadence-quadspi: Fix cqspi_command_read() definition Tudor.Ambarus
2019-10-10 6:54 ` Boris Brezillon
2019-10-23 21:25 ` Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 04/22] mtd: spi-nor: Rename nor->params to nor->flash Tudor.Ambarus
2019-10-10 7:05 ` Boris Brezillon
2019-10-23 21:34 ` Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 05/22] mtd: spi-nor: Rework read_sr() Tudor.Ambarus
2019-10-10 7:13 ` Boris Brezillon
2019-09-24 7:46 ` [PATCH v2 06/22] mtd: spi-nor: Rework read_fsr() Tudor.Ambarus
2019-10-10 7:14 ` Boris Brezillon
2019-09-24 7:46 ` [PATCH v2 07/22] mtd: spi-nor: Rework read_cr() Tudor.Ambarus
2019-10-10 7:16 ` Boris Brezillon
2019-10-10 7:16 ` Boris Brezillon
2019-09-24 7:46 ` [PATCH v2 08/22] mtd: spi-nor: Rework write_enable/disable() Tudor.Ambarus
2019-10-10 7:21 ` Boris Brezillon
2019-10-23 23:39 ` Tudor.Ambarus
2019-10-24 6:04 ` Boris Brezillon
2019-10-24 11:01 ` Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 09/22] mtd: spi-nor: Fix retlen handling in sst_write() Tudor.Ambarus
2019-10-10 7:33 ` Boris Brezillon
2019-10-25 7:34 ` Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 10/22] mtd: spi-nor: Rework write_sr() Tudor.Ambarus
2019-10-04 9:39 ` John Garry
2019-10-04 10:03 ` Tudor.Ambarus
2019-10-04 10:26 ` John Garry
2019-10-04 10:47 ` [PATCH] mtd: spi-nor: Fix direction of the write_sr() transfer Tudor.Ambarus
2019-10-04 10:48 ` Tudor.Ambarus
2019-10-04 11:31 ` John Garry
2019-10-04 15:17 ` John Garry
2019-10-04 15:50 ` Tudor.Ambarus
2019-10-04 16:06 ` Vignesh Raghavendra
2019-10-04 16:09 ` Miquel Raynal
2019-09-24 7:46 ` [PATCH v2 11/22] mtd: spi-nor: Rework spi_nor_read/write_sr2() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 12/22] mtd: spi-nor: Report error in spi_nor_xread_sr() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 13/22] mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 14/22] mtd: spi-nor: Drop duplicated new line Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 15/22] mtd: spi-nor: Drop spansion_quad_enable() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 16/22] mtd: spi-nor: Fix errno on quad_enable methods Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 17/22] mtd: spi-nor: Check all the bits written, not just the BP ones Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 18/22] mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 19/22] mtd: spi-nor: Rework macronix_quad_enable() Tudor.Ambarus
2019-09-24 7:46 ` [PATCH v2 20/22] mtd: spi-nor: Rework spansion(_no)_read_cr_quad_enable() Tudor.Ambarus
2019-09-24 7:47 ` Tudor.Ambarus [this message]
2019-09-24 7:47 ` [PATCH v2 22/22] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-09-25 10:11 ` [PATCH v2 00/22] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190924074533.6618-22-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=andrew@aj.id.au \
--cc=boris.brezillon@collabora.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=geert+renesas@glider.be \
--cc=joel@jms.id.au \
--cc=jonas@norrbonn.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=matthias.bgg@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).