From: Rishi Gupta <gupt21@gmail.com>
To: jic23@kernel.org
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
gregkh@linuxfoundation.org, tglx@linutronix.de,
allison@lohutok.net, alexios.zavras@intel.com, angus@akkea.ca,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
hslester96@gmail.com, wsa+renesas@sang-engineering.com,
Rishi Gupta <gupt21@gmail.com>
Subject: [RESEND PATCH v2 3/3] iio: documentation: light: Add veml6030 sysfs documentation
Date: Tue, 24 Sep 2019 16:21:58 +0530 [thread overview]
Message-ID: <35614391cf5e79765a6151ce998a213544562a37.1569321085.git.gupt21@gmail.com> (raw)
In-Reply-To: <cover.1569321085.git.gupt21@gmail.com>
In-Reply-To: <cover.1569321085.git.gupt21@gmail.com>
The driver for veml6030 light sensor provides custom sysfs entries
used to know parameters supported by the driver and to configure
sensor like setting power saving mode and persistence etc. This
commit document them.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
---
Changes in v2:
* Nothing has changed in this file
.../ABI/testing/sysfs-bus-iio-light-veml6030 | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-veml6030
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-veml6030 b/Documentation/ABI/testing/sysfs-bus-iio-light-veml6030
new file mode 100644
index 0000000..13589c9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-veml6030
@@ -0,0 +1,49 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_psm_available
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ Provides list of valid values that can be used to activate a
+ particular power saving mode in sensor. For ex; 1 means psm
+ mode 1 and 2 means psm mode 2.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_psm
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ Writing '1' will activate power saving mode 1 in sensor.
+ Similarly, 2 is to activate psm mode 2 and so on.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_period_available
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ List of valid values available in multiples of integration time
+ for which the light intensity must be above the cutoff level
+ before interrupt is asserted. This refers to persistence values.
+
+What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_thresh_either_period
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ Value in multiple of integration time for which the light intensity must
+ be above the cutoff level before interrupt is asserted.
+
+What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_thresh_rising_value
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ Raw threshold value from 0 to 0xffffffff. An interrupt will be asserted whenever
+ light intensity is above this value.
+
+What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_thresh_falling_value
+Date: September 2019
+KernelVersion: 5.3.1
+Contact: Rishi Gupta <gupt21@gmail.com>
+Description:
+ Raw threshold value from 0 to 0xffffffff. An interrupt will be asserted whenever
+ light intensity is below this value.
--
2.7.4
next prev parent reply other threads:[~2019-09-24 10:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-24 10:51 [RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor Rishi Gupta
2019-09-24 10:51 ` [RESEND PATCH v2 1/3] iio: light: add " Rishi Gupta
2019-10-05 14:08 ` Jonathan Cameron
2019-10-21 13:28 ` [PATCH v3 " Rishi Gupta
2019-10-22 3:57 ` [PATCH v4 " Rishi Gupta
2019-10-22 10:00 ` Jonathan Cameron
2019-10-22 12:32 ` rishi gupta
2019-10-27 9:26 ` Jonathan Cameron
2019-09-24 10:51 ` [RESEND PATCH v2 2/3] dt-bindings: iio: light: add veml6030 ALS bindings Rishi Gupta
2019-10-05 14:14 ` Jonathan Cameron
2019-10-21 13:31 ` [PATCH v3 " Rishi Gupta
2019-10-21 17:28 ` Rob Herring
2019-10-22 3:57 ` [PATCH v4 " Rishi Gupta
2019-09-24 10:51 ` Rishi Gupta [this message]
2019-10-05 14:11 ` [RESEND PATCH v2 3/3] iio: documentation: light: Add veml6030 sysfs documentation Jonathan Cameron
2019-10-21 13:31 ` [PATCH v3 " Rishi Gupta
2019-10-22 3:58 ` [PATCH v4 " Rishi Gupta
2019-10-22 9:48 ` Jonathan Cameron
2019-10-05 14:08 ` [RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor Jonathan Cameron
2019-10-21 13:37 ` rishi gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35614391cf5e79765a6151ce998a213544562a37.1569321085.git.gupt21@gmail.com \
--to=gupt21@gmail.com \
--cc=alexios.zavras@intel.com \
--cc=allison@lohutok.net \
--cc=angus@akkea.ca \
--cc=gregkh@linuxfoundation.org \
--cc=hslester96@gmail.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=tglx@linutronix.de \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).