From: Benoit Parrot <bparrot@ti.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 11/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage
Date: Mon, 7 Oct 2019 10:09:59 -0500 [thread overview]
Message-ID: <20191007151009.22095-12-bparrot@ti.com> (raw)
In-Reply-To: <20191007151009.22095-1-bparrot@ti.com>
v4l2-compliance fails with this message:
fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
fail: v4l2-test-formats.cpp(736): \
Video Capture Multiplanar is valid, \
but TRY_FMT failed to return a format
test VIDIOC_TRY_FMT: FAIL
This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.
VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/media/platform/ti-vpe/vpdma.h | 1 +
drivers/media/platform/ti-vpe/vpe.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index bce17329c4c9..393fcbb3cb40 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -57,6 +57,7 @@ struct vpdma_data_format {
* line stride of source and dest
* buffers should be 16 byte aligned
*/
+#define VPDMA_MAX_STRIDE 65520 /* Max line stride 16 byte aligned */
#define VPDMA_DTD_DESC_SIZE 32 /* 8 words */
#define VPDMA_CFD_CTD_DESC_SIZE 16 /* 4 words */
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 7aa83026fb6c..0a7cf9c820c6 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1694,6 +1694,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
if (stride > plane_fmt->bytesperline)
plane_fmt->bytesperline = stride;
+ plane_fmt->bytesperline = clamp_t(u32, plane_fmt->bytesperline,
+ stride,
+ VPDMA_MAX_STRIDE);
+
plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline,
VPDMA_STRIDE_ALIGN);
--
2.17.1
next prev parent reply other threads:[~2019-10-07 15:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 15:09 [Patch v3 00/21] media: vpe: maintenance Benoit Parrot
2019-10-07 15:09 ` [Patch v3 01/21] media: ti-vpe: Fix a parallel build issue Benoit Parrot
2019-10-07 15:09 ` [Patch v3 02/21] media: ti-vpe: vpe: Fix Motion Vector vpdma stride Benoit Parrot
2019-10-07 15:09 ` [Patch v3 03/21] media: ti-vpe: vpe: Add missing null pointer checks Benoit Parrot
2019-10-07 15:09 ` [Patch v3 04/21] media: ti-vpe: vpe: Remove unnecessary use of container_of Benoit Parrot
2019-10-07 15:09 ` [Patch v3 05/21] media: ti-vpe: Add support for SEQ_BT Benoit Parrot
2019-10-07 15:09 ` [Patch v3 06/21] media: ti-vpe: Add support for NV21 format Benoit Parrot
2019-10-07 15:09 ` [Patch v3 07/21] media: ti-vpe: Set MAX height supported to 2048 pixels Benoit Parrot
2019-10-07 15:09 ` [Patch v3 08/21] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic Benoit Parrot
2019-10-07 15:09 ` [Patch v3 09/21] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format Benoit Parrot
2019-10-07 15:09 ` [Patch v3 10/21] media: ti-vpe: vpe: Make sure YUYV is set as default format Benoit Parrot
2019-10-07 15:09 ` Benoit Parrot [this message]
2019-10-07 15:10 ` [Patch v3 12/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number Benoit Parrot
2019-10-07 15:10 ` [Patch v3 13/21] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases Benoit Parrot
2019-10-07 15:10 ` [Patch v3 14/21] media: ti-vpe: vpdma: Use fixed type for address in descriptor Benoit Parrot
2019-10-07 15:10 ` [Patch v3 15/21] media: ti-vpe: Set the DMA mask and coherent mask Benoit Parrot
2019-10-07 15:10 ` [Patch v3 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields Benoit Parrot
2019-10-07 15:10 ` [Patch v3 17/21] media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func Benoit Parrot
2019-10-07 15:10 ` [Patch v3 18/21] media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong Benoit Parrot
2019-10-07 15:10 ` [Patch v3 19/21] media: v4l2-common: add pixel encoding support Benoit Parrot
2019-10-07 15:10 ` [Patch v3 20/21] media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info Benoit Parrot
2019-10-07 15:10 ` [Patch v3 21/21] media: ti-vpe: vpe: don't rely on colorspace member for conversion Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191007151009.22095-12-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).