From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Zumeng Chen <zumeng.chen@windriver.com>,
Quanyang Wang <quanyang.wang@windriver.com>,
Mark Rutland <mark.rutland@arm.com>,
Peter Crosthwaite <peter.crosthwaite@xilinx.com>,
Rob Herring <robh+dt@kernel.org>, Rob Herring <robh@kernel.org>,
Rob Herring <robherring2@gmail.com>,
Steffen Trumtrar <s.trumtrar@pengutronix.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
u-boot@lists.denx.de
Subject: [PATCH] ARM: dts: zynq: enablement of coresight topology
Date: Wed, 9 Oct 2019 16:07:22 +0200 [thread overview]
Message-ID: <a38ab93d870a3b1b341a5c0da14fc7f3d4056684.1570630040.git.michal.simek@xilinx.com> (raw)
From: Zumeng Chen <zumeng.chen@windriver.com>
This patch is to build the coresight topology structure of zynq-7000
series according to the docs of coresight and userguide of zynq-7000.
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/zynq-7000.dtsi | 158 +++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ca6425ad794c..86430ad76fee 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -59,6 +59,40 @@
regulator-always-on;
};
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+ in-ports {
+ /* replicator input port */
+ port {
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
amba: amba {
compatible = "simple-bus";
#address-cells = <1>;
@@ -365,5 +399,129 @@
reg = <0xf8005000 0x1000>;
timeout-sec = <10>;
};
+
+ etb@f8801000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0xf8801000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ tpiu@f8803000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xf8803000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@f8804000 {
+ compatible = "arm,coresight-static-funnel", "arm,primecell";
+ reg = <0xf8804000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ /* funnel output ports */
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ funnel0_in_port3: endpoint {
+ remote-endpoint = <&itm_out_port>;
+ };
+ };
+ /* The other input ports are not connect to anything */
+ };
+ };
+
+ /* ITM is not supported by kernel, only leave device node here */
+ itm@f8805000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf8805000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ out-ports {
+ port {
+ itm_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
+ };
+ };
+ };
+
+ ptm@f889c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889c000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@f889d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889d000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+ };
+ };
};
};
--
2.17.1
next reply other threads:[~2019-10-09 14:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 14:07 Michal Simek [this message]
2019-10-10 7:35 ` [PATCH] ARM: dts: zynq: enablement of coresight topology qwang2
2019-10-23 17:32 ` Mathieu Poirier
2019-10-24 7:05 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a38ab93d870a3b1b341a5c0da14fc7f3d4056684.1570630040.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=monstr@monstr.eu \
--cc=peter.crosthwaite@xilinx.com \
--cc=quanyang.wang@windriver.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=robherring2@gmail.com \
--cc=s.trumtrar@pengutronix.de \
--cc=u-boot@lists.denx.de \
--cc=zumeng.chen@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).