From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Jonathan Cameron <jic23@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-iio@vger.kernel.org
Subject: [PATCH] dt-bindings: Clean-up regulator '-supply' schemas
Date: Fri, 11 Oct 2019 14:02:31 -0500 [thread overview]
Message-ID: <20191011190231.9779-1-robh@kernel.org> (raw)
Regulator '*-supply' properties are always a single phandle, so
'maxItems: 1' or a $ref is not necessary. All that's needed is either
'true' or an optional 'description'. Following this clean-up, the
meta-schema will enforce this pattern.
There's one case in tree with 'innolux,n156bge-l21' having 2 phandles.
This appears to be a mistake or abuse of simple-panel as it's 2 different
voltage rails connected to 'power-supply'.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml | 2 --
Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 3 +--
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 3 +--
Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 3 +--
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml | 3 ---
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 5 +----
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 1 -
Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 1 -
.../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 4 +---
.../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 1 -
Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 --
.../devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml | 1 -
.../devicetree/bindings/regulator/fixed-regulator.yaml | 1 -
13 files changed, 5 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index fb747682006d..0da42ab8fd3a 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -79,8 +79,6 @@ properties:
hdmi-supply:
description: phandle to an external 5V regulator to power the HDMI logic
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
port@0:
type: object
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 5f1fd6d7ee0f..e50a0cc78fff 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -37,8 +37,7 @@ properties:
clocks:
maxItems: 1
- mali-supply:
- maxItems: 1
+ mali-supply: true
operating-points-v2: true
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 47bc1ac36426..5c576e5019c6 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -69,8 +69,7 @@ properties:
- const: core
- const: bus
- mali-supply:
- maxItems: 1
+ mali-supply: true
resets:
minItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index c5d93c5839d3..afde81be3c29 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -97,8 +97,7 @@ properties:
memory-region: true
- mali-supply:
- maxItems: 1
+ mali-supply: true
power-domains:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index 9692b7f719f5..e932d5aed02f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -45,15 +45,12 @@ properties:
refin1-supply:
description: refin1 supply can be used as reference for conversion.
- maxItems: 1
refin2-supply:
description: refin2 supply can be used as reference for conversion.
- maxItems: 1
avdd-supply:
description: avdd supply can be used as reference for conversion.
- maxItems: 1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cc544fdc38be..6eb33207a167 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -31,10 +31,7 @@ properties:
spi-cpha: true
- avcc-supply:
- description:
- Phandle to the Avcc power supply
- maxItems: 1
+ avcc-supply: true
interrupts:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index d1109416963c..9acde6d2e2d9 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -39,7 +39,6 @@ properties:
avdd-supply:
description:
The regulator supply for the ADC reference voltage.
- maxItems: 1
powerdown-gpios:
description:
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index d76ece97c76c..91ab9c842273 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -41,7 +41,6 @@ properties:
avdd-supply:
description:
Definition of the regulator used as analog supply
- maxItems: 1
clock-frequency:
minimum: 20000
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index b4c6c26681d9..9218b2efa62f 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -46,9 +46,7 @@ properties:
"#io-channel-cells":
const: 1
- vdd-supply:
- description: VDD input supply
- maxItems: 1
+ vdd-supply: true
samsung,syscon-phandle:
$ref: '/schemas/types.yaml#/definitions/phandle'
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index a551d3101f93..19e53930ebf6 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -25,7 +25,6 @@ properties:
vcc-supply:
description: regulator that provides power to the sensor
- maxItems: 1
plantower,set-gpios:
description: GPIO connected to the SET line
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index c6721a7e8938..519137e5c170 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -28,12 +28,10 @@ properties:
vddd-supply:
description:
digital voltage regulator (see regulator/regulator.txt)
- maxItems: 1
vdda-supply:
description:
analog voltage regulator (see regulator/regulator.txt)
- maxItems: 1
reset-gpios:
description:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 51254b4e65dd..57d8603076bd 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -36,7 +36,6 @@ properties:
const: 0
phy-supply:
- maxItems: 1
description:
Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence.
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index a78150c47aa2..e56d97b233f4 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -64,7 +64,6 @@ properties:
vin-supply:
description: Input supply phandle.
- $ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
--
2.20.1
next reply other threads:[~2019-10-11 19:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 19:02 Rob Herring [this message]
2019-10-12 9:44 ` [PATCH] dt-bindings: Clean-up regulator '-supply' schemas Jonathan Cameron
2019-10-18 19:50 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011190231.9779-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=khilman@baylibre.com \
--cc=kishon@ti.com \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).