From: Hanna Hawa <hhhawa@amazon.com>
To: <bp@alien8.de>, <mchehab@kernel.org>, <mark.rutland@arm.com>,
<james.morse@arm.com>, <robh+dt@kernel.org>,
<frowand.list@gmail.com>, <davem@davemloft.net>,
<gregkh@linuxfoundation.org>, <linus.walleij@linaro.org>,
<daniel@iogearbox.net>, <paulmck@linux.ibm.com>,
<Sudeep.Holla@arm.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-edac@vger.kernel.org>,
<devicetree@vger.kernel.org>, <dwmw@amazon.co.uk>,
<benh@amazon.com>, <ronenk@amazon.com>, <talel@amazon.com>,
<jonnyc@amazon.com>, <hanochu@amazon.com>, <hhhawa@amazon.com>
Subject: [PATCH v7 1/3] edac: Add support for Amazon's Annapurna Labs L1 EDAC
Date: Tue, 15 Oct 2019 13:09:25 +0100 [thread overview]
Message-ID: <20191015120927.10470-2-hhhawa@amazon.com> (raw)
In-Reply-To: <20191015120927.10470-1-hhhawa@amazon.com>
Adds support for Amazon's Annapurna Labs L1 EDAC driver to detect and
report L1 errors.
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
---
MAINTAINERS | 5 +
drivers/edac/Kconfig | 8 ++
drivers/edac/Makefile | 1 +
drivers/edac/al_l1_edac.c | 190 ++++++++++++++++++++++++++++++++++++++
4 files changed, 204 insertions(+)
create mode 100644 drivers/edac/al_l1_edac.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 77eae44bf5de..7887a62dc843 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -743,6 +743,11 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
+AMAZON ANNAPURNA LABS L1 EDAC
+M: Hanna Hawa <hhhawa@amazon.com>
+S: Maintained
+F: drivers/edac/al_l1_edac.c
+
AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
M: Talel Shenhar <talel@amazon.com>
S: Maintained
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 200c04ce5b0e..e26c54216519 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -74,6 +74,14 @@ config EDAC_GHES
In doubt, say 'Y'.
+config EDAC_AL_L1
+ tristate "Amazon's Annapurna Labs L1 EDAC"
+ depends on (ARM64 && ARCH_ALPINE) || COMPILE_TEST
+ help
+ Support for L1 error detection and correction
+ for Amazon's Annapurna Labs SoCs.
+ This driver detects errors of L1 caches.
+
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64)"
depends on AMD_NB && EDAC_DECODE_MCE
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 165ca65e1a3a..caa2dc91e8a0 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_EDAC_GHES) += ghes_edac.o
edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o
+obj-$(CONFIG_EDAC_AL_L1) += al_l1_edac.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
diff --git a/drivers/edac/al_l1_edac.c b/drivers/edac/al_l1_edac.c
new file mode 100644
index 000000000000..e363a80b4d13
--- /dev/null
+++ b/drivers/edac/al_l1_edac.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <asm/sysreg.h>
+#include <linux/bitfield.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include "edac_device.h"
+#include "edac_module.h"
+
+#define DRV_NAME "al_l1_edac"
+
+/* Same bit assignments of CPUMERRSR_EL1 in ARM CA57/CA72 */
+#define ARM_CA57_CPUMERRSR_EL1 sys_reg(3, 1, 15, 2, 2)
+#define ARM_CA57_CPUMERRSR_RAM_ID GENMASK(30, 24)
+#define ARM_CA57_L1_I_TAG_RAM 0x00
+#define ARM_CA57_L1_I_DATA_RAM 0x01
+#define ARM_CA57_L1_D_TAG_RAM 0x08
+#define ARM_CA57_L1_D_DATA_RAM 0x09
+#define ARM_CA57_L2_TLB_RAM 0x18
+#define ARM_CA57_CPUMERRSR_VALID BIT(31)
+#define ARM_CA57_CPUMERRSR_REPEAT GENMASK_ULL(39, 32)
+#define ARM_CA57_CPUMERRSR_OTHER GENMASK_ULL(47, 40)
+#define ARM_CA57_CPUMERRSR_FATAL BIT_ULL(63)
+
+#define AL_L1_EDAC_MSG_MAX 256
+
+static void al_l1_edac_cpumerrsr_read_status(void *arg)
+{
+ struct edac_device_ctl_info *edac_dev = arg;
+ int cpu, i, space, count;
+ u32 ramid, repeat, other, fatal;
+ u64 val;
+ char msg[AL_L1_EDAC_MSG_MAX];
+ char *p;
+
+ val = read_sysreg_s(ARM_CA57_CPUMERRSR_EL1);
+ if (!(FIELD_GET(ARM_CA57_CPUMERRSR_VALID, val)))
+ return;
+
+ write_sysreg_s(0, ARM_CA57_CPUMERRSR_EL1);
+
+ cpu = smp_processor_id();
+ ramid = FIELD_GET(ARM_CA57_CPUMERRSR_RAM_ID, val);
+ repeat = FIELD_GET(ARM_CA57_CPUMERRSR_REPEAT, val);
+ other = FIELD_GET(ARM_CA57_CPUMERRSR_OTHER, val);
+ fatal = FIELD_GET(ARM_CA57_CPUMERRSR_FATAL, val);
+
+ space = sizeof(msg);
+ p = msg;
+ count = scnprintf(p, space, "CPU%d L1 %serror detected", cpu,
+ (fatal) ? "Fatal " : "");
+ p += count;
+ space -= count;
+
+ switch (ramid) {
+ case ARM_CA57_L1_I_TAG_RAM:
+ count = scnprintf(p, space, " RAMID='L1-I Tag RAM'");
+ break;
+ case ARM_CA57_L1_I_DATA_RAM:
+ count = scnprintf(p, space, " RAMID='L1-I Data RAM'");
+ break;
+ case ARM_CA57_L1_D_TAG_RAM:
+ count = scnprintf(p, space, " RAMID='L1-D Tag RAM'");
+ break;
+ case ARM_CA57_L1_D_DATA_RAM:
+ count = scnprintf(p, space, " RAMID='L1-D Data RAM'");
+ break;
+ case ARM_CA57_L2_TLB_RAM:
+ count = scnprintf(p, space, " RAMID='L2 TLB RAM'");
+ break;
+ default:
+ count = scnprintf(p, space, " RAMID='unknown'");
+ break;
+ }
+
+ p += count;
+ space -= count;
+ count = scnprintf(p, space,
+ " repeat=%d, other=%d (CPUMERRSR_EL1=0x%llx)",
+ repeat, other, val);
+
+ for (i = 0; i < repeat; i++) {
+ if (fatal)
+ edac_device_handle_ue(edac_dev, 0, 0, msg);
+ else
+ edac_device_handle_ce(edac_dev, 0, 0, msg);
+ }
+}
+
+static void al_l1_edac_check(struct edac_device_ctl_info *edac_dev)
+{
+ on_each_cpu(al_l1_edac_cpumerrsr_read_status, edac_dev, 1);
+}
+
+static int al_l1_edac_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ edac_dev = edac_device_alloc_ctl_info(0, DRV_NAME, 1, "L", 1, 1, NULL,
+ 0, edac_device_alloc_index());
+ if (!edac_dev)
+ return -ENOMEM;
+
+ edac_dev->edac_check = al_l1_edac_check;
+ edac_dev->dev = dev;
+ edac_dev->mod_name = DRV_NAME;
+ edac_dev->dev_name = dev_name(dev);
+ edac_dev->ctl_name = "L1_cache";
+ platform_set_drvdata(pdev, edac_dev);
+
+ ret = edac_device_add_device(edac_dev);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_err(dev, "Failed to add L1 edac device (%d)\n", ret);
+ edac_device_free_ctl_info(edac_dev);
+
+ return ret;
+}
+
+static int al_l1_edac_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
+
+ edac_device_del_device(edac_dev->dev);
+ edac_device_free_ctl_info(edac_dev);
+
+ return 0;
+}
+
+static const struct of_device_id al_l1_edac_of_match[] = {
+ { .compatible = "al,alpine-v2" },
+ { .compatible = "amazon,alpine-v3" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, al_l1_edac_of_match);
+
+static struct platform_driver al_l1_edac_driver = {
+ .probe = al_l1_edac_probe,
+ .remove = al_l1_edac_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static struct platform_device *edac_l1_device;
+
+static int __init al_l1_init(void)
+{
+ struct device_node *root = of_find_node_by_path("/");
+ int ret;
+
+ if (!of_match_node(al_l1_edac_of_match, root))
+ return 0;
+
+ ret = platform_driver_register(&al_l1_edac_driver);
+ if (ret) {
+ pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
+ return ret;
+ }
+
+ edac_l1_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(edac_l1_device)) {
+ pr_err("Failed to register EDAC AL L1 platform device\n");
+ return PTR_ERR(edac_l1_device);
+ }
+
+ return 0;
+}
+
+static void __exit al_l1_exit(void)
+{
+ platform_device_unregister(edac_l1_device);
+ platform_driver_unregister(&al_l1_edac_driver);
+}
+
+late_initcall(al_l1_init);
+module_exit(al_l1_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hanna Hawa <hhhawa@amazon.com>");
+MODULE_DESCRIPTION("Amazon's Annapurna Lab's L1 EDAC Driver");
--
2.17.1
next prev parent reply other threads:[~2019-10-15 12:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 12:09 [PATCH v7 0/3] Add support for Amazon's Annapurna Labs EDAC for L1/L2 Hanna Hawa
2019-10-15 12:09 ` Hanna Hawa [this message]
2020-01-15 18:49 ` [PATCH v7 1/3] edac: Add support for Amazon's Annapurna Labs L1 EDAC James Morse
2020-01-20 14:41 ` Hawa, Hanna
2019-10-15 12:09 ` [PATCH v7 2/3] of: EXPORT_SYMBOL_GPL of_find_next_cache_node Hanna Hawa
2019-10-17 14:09 ` Rob Herring
2019-10-15 12:09 ` [PATCH v7 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC Hanna Hawa
2020-01-15 18:50 ` James Morse
2020-01-20 14:52 ` Hawa, Hanna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191015120927.10470-2-hhhawa@amazon.com \
--to=hhhawa@amazon.com \
--cc=Sudeep.Holla@arm.com \
--cc=benh@amazon.com \
--cc=bp@alien8.de \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hanochu@amazon.com \
--cc=james.morse@arm.com \
--cc=jonnyc@amazon.com \
--cc=linus.walleij@linaro.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=paulmck@linux.ibm.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).