[6/7] ASoC: amd: ACP powergating should be done by controller
diff mbox series

Message ID 1571432760-3008-6-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
State New
Headers show
Series
  • [1/7] ASoC: amd: Create multiple I2S platform device endpoints.
Related show

Commit Message

Ravulapati Vishnu vardhan rao Oct. 18, 2019, 9:05 p.m. UTC
ACP power gating should be done by ACP-PCI.previous it was
handled in DMA driver which is not authorised to do.Moving
it to ACP-PCI.

Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
---
 sound/soc/amd/raven/acp3x-pcm-dma.c | 141 +----------------------------------
 sound/soc/amd/raven/acp3x.h         |   7 ++
 sound/soc/amd/raven/pci-acp3x.c     | 145 +++++++++++++++++++++++++++++++++++-
 3 files changed, 153 insertions(+), 140 deletions(-)

Comments

Dan Carpenter Oct. 18, 2019, 10:39 a.m. UTC | #1
On Sat, Oct 19, 2019 at 02:35:44AM +0530, Ravulapati Vishnu vardhan rao wrote:
> diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c
> index 7f435b3..b74ecf6 100644
> --- a/sound/soc/amd/raven/pci-acp3x.c
> +++ b/sound/soc/amd/raven/pci-acp3x.c
> @@ -19,11 +19,140 @@ struct acp3x_dev_data {
>  	struct platform_device *pdev[ACP3x_DEVS];
>  };
>  
> +static int acp3x_power_on(void __iomem *acp3x_base)
> +{
> +	u32 val;
> +	u32 timeout = 0;
> +	int ret = 0;
> +
> +	val = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
> +	if (val) {

Just flip this around.

	if (val == 0)
		return 0;

> +		if (!((val & ACP_PGFSM_STATUS_MASK) ==
> +				ACP_POWER_ON_IN_PROGRESS))
> +			rv_writel(ACP_PGFSM_CNTL_POWER_ON_MASK,
> +				acp3x_base + mmACP_PGFSM_CONTROL);
> +		while (true) {

while (++timeout < 500) {


> +			val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
> +			if (!val)
> +				break;

return 0;

> +			udelay(1);
> +			if (timeout > 500) {
> +				pr_err("ACP is Not Powered ON\n");
> +				ret = -ETIMEDOUT;
> +				break;
> +			}
> +			timeout++;
> +		}
> +		if (ret) {
> +			pr_err("ACP is not powered on status:%d\n", ret);

Just one error message is enough.

	pr_err("ACP is Not Powered ON\n");
	return -ETIMEDOUT;


> +			return ret;
> +		}
> +	}
> +	return ret;
> +}
> +
> +static int acp3x_power_off(void __iomem *acp3x_base)
> +{
> +	u32 val;
> +	u32 timeout = 0;
> +	int ret = 0;
> +
> +	val = rv_readl(acp3x_base + mmACP_PGFSM_CONTROL);

val is not used.  We want to turn on set but not used warnings
eventually.

> +	rv_writel(ACP_PGFSM_CNTL_POWER_OFF_MASK,
> +			acp3x_base + mmACP_PGFSM_CONTROL);
> +	while (true) {
> +		val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
> +		if ((val & ACP_PGFSM_STATUS_MASK) == ACP_POWERED_OFF)
> +			break;
> +		udelay(1);
> +		if (timeout > 500) {
> +			pr_err("ACP is Not Powered OFF\n");
> +			ret = -ETIMEDOUT;
> +			break;
> +		}
> +		timeout++;
> +	}
> +	if (ret)
> +		pr_err("ACP is not powered off status:%d\n", ret);
> +	return ret;

Same as above.

> +}
> +
> +
> +static int acp3x_reset(void __iomem *acp3x_base)
> +{
> +	u32 val, timeout;
> +
> +	rv_writel(1, acp3x_base + mmACP_SOFT_RESET);
> +	timeout = 0;
> +	while (true) {

	while (++timeout < 100) {

> +		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
> +		if ((val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK) ||
> +							timeout > 100) {
> +			if (val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK)
> +				break;


Duplicated needlessly.

> +			return -ENODEV;
> +		}
> +		timeout++;
> +		cpu_relax();
> +	}


	if (timeout == 100)
		return -ENODEV;

> +	rv_writel(0, acp3x_base + mmACP_SOFT_RESET);
> +	timeout = 0;
> +	while (true) {
> +		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);

Split the "if (!val) break;" into it's own condition instead of part of
the ||.

> +		if (!val || timeout > 100) {
> +			if (!val)
> +				break;
> +			return -ENODEV;
> +		}
> +		timeout++;
> +		cpu_relax();
> +	}
> +	return 0;
> +}
> +
> +static int acp3x_init(void __iomem *acp3x_base)
> +{
> +	int ret;
> +
> +	/* power on */
> +	ret = acp3x_power_on(acp3x_base);
> +	if (ret) {
> +		pr_err("ACP3x power on failed\n");
> +		return ret;
> +	}
> +	/* Reset */
> +	ret = acp3x_reset(acp3x_base);
> +	if (ret) {
> +		pr_err("ACP3x reset failed\n");
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +static int acp3x_deinit(void __iomem *acp3x_base)
> +{
> +	int ret;
> +
> +	/* Reset */
> +	ret = acp3x_reset(acp3x_base);
> +	if (ret) {
> +		pr_err("ACP3x reset failed\n");
> +		return ret;
> +	}
> +	/* power off */
> +	ret = acp3x_power_off(acp3x_base);
> +	if (ret) {
> +		pr_err("ACP3x power off failed\n");
> +		return ret;
> +	}
> +	return 0;
> +}
> +
>  static int snd_acp3x_probe(struct pci_dev *pci,
>  			   const struct pci_device_id *pci_id)
>  {
>  	int ret;
> -	u32 addr, val, i;
> +	u32 addr, val, i, status;
>  	struct acp3x_dev_data *adata;
>  	struct platform_device_info pdevinfo[ACP3x_DEVS];
>  	unsigned int irqflags;
> @@ -63,6 +192,10 @@ static int snd_acp3x_probe(struct pci_dev *pci,
>  	}
>  	pci_set_master(pci);
>  	pci_set_drvdata(pci, adata);
> +	status = acp3x_init(adata->acp3x_base);
> +	if (status)
> +		return -ENODEV;

Why do we need both "status" and "ret".  Preserve the error code?

> +
>  
>  	val = rv_readl(adata->acp3x_base + mmACP_I2S_PIN_CONFIG);
>  	switch (val) {
> @@ -132,6 +265,11 @@ static int snd_acp3x_probe(struct pci_dev *pci,
>  	return 0;
>  
>  unmap_mmio:
> +	status = acp3x_deinit(adata->acp3x_base);
> +	if (status)
> +		dev_err(&pci->dev, "ACP de-init failed\n");
> +	else
> +		dev_info(&pci->dev, "ACP de-initialized\n");
>  	for (i = 0 ; i < ACP3x_DEVS ; i++)
>  		platform_device_unregister(adata->pdev[i]);
>  	kfree(adata->res);
> @@ -153,6 +291,11 @@ static void snd_acp3x_remove(struct pci_dev *pci)
>  		for (i = 0 ; i <  ACP3x_DEVS ; i++)
>  			platform_device_unregister(adata->pdev[i]);
>  	}
> +	i = acp3x_deinit(adata->acp3x_base);

Please don't re-use "i" like this.  Declare "ret" or "status" or
something.

> +	if (i)
> +		dev_err(&pci->dev, "ACP de-init failed\n");
> +	else
> +		dev_info(&pci->dev, "ACP de-initialized\n");
>  	iounmap(adata->acp3x_base);
>  
>  	pci_disable_msi(pci);

regards,
dan carpenter
vishnu Nov. 6, 2019, 2:11 p.m. UTC | #2
On 18/10/19 4:09 PM, Dan Carpenter wrote:
> On Sat, Oct 19, 2019 at 02:35:44AM +0530, Ravulapati Vishnu vardhan rao wrote:
>> diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c
>> index 7f435b3..b74ecf6 100644
>> --- a/sound/soc/amd/raven/pci-acp3x.c
>> +++ b/sound/soc/amd/raven/pci-acp3x.c
>> @@ -19,11 +19,140 @@ struct acp3x_dev_data {
>>   	struct platform_device *pdev[ACP3x_DEVS];
>>   };
>>   
>> +static int acp3x_power_on(void __iomem *acp3x_base)
>> +{
>> +	u32 val;
>> +	u32 timeout = 0;
>> +	int ret = 0;
>> +
>> +	val = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
>> +	if (val) {
> 
> Just flip this around.
Will address this thanks.
> 
> 	if (val == 0)
> 		return 0;
> 
>> +		if (!((val & ACP_PGFSM_STATUS_MASK) ==
>> +				ACP_POWER_ON_IN_PROGRESS))
>> +			rv_writel(ACP_PGFSM_CNTL_POWER_ON_MASK,
>> +				acp3x_base + mmACP_PGFSM_CONTROL);
>> +		while (true) {
> 
> while (++timeout < 500) {
> 
> 
>> +			val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
>> +			if (!val)
>> +				break;
> 
> return 0;
> 
>> +			udelay(1);
>> +			if (timeout > 500) {
>> +				pr_err("ACP is Not Powered ON\n");
>> +				ret = -ETIMEDOUT;
>> +				break;
>> +			}
>> +			timeout++;
>> +		}
>> +		if (ret) {
>> +			pr_err("ACP is not powered on status:%d\n", ret);
> 
> Just one error message is enough.
Will address this thanks.
> 
> 	pr_err("ACP is Not Powered ON\n");
> 	return -ETIMEDOUT;
> 
> 
>> +			return ret;
>> +		}
>> +	}
>> +	return ret;
>> +}
>> +
>> +static int acp3x_power_off(void __iomem *acp3x_base)
>> +{
>> +	u32 val;
>> +	u32 timeout = 0;
>> +	int ret = 0;
>> +
>> +	val = rv_readl(acp3x_base + mmACP_PGFSM_CONTROL);
> 
> val is not used.  We want to turn on set but not used warnings
> eventually.
> 
Will address this thanks.
>> +	rv_writel(ACP_PGFSM_CNTL_POWER_OFF_MASK,
>> +			acp3x_base + mmACP_PGFSM_CONTROL);
>> +	while (true) {
>> +		val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
>> +		if ((val & ACP_PGFSM_STATUS_MASK) == ACP_POWERED_OFF)
>> +			break;
>> +		udelay(1);
>> +		if (timeout > 500) {
>> +			pr_err("ACP is Not Powered OFF\n");
>> +			ret = -ETIMEDOUT;
>> +			break;
>> +		}
>> +		timeout++;
>> +	}
>> +	if (ret)
>> +		pr_err("ACP is not powered off status:%d\n", ret);
>> +	return ret;
> 
> Same as above.
> 
Will address this thanks.
>> +}
>> +
>> +
>> +static int acp3x_reset(void __iomem *acp3x_base)
>> +{
>> +	u32 val, timeout;
>> +
>> +	rv_writel(1, acp3x_base + mmACP_SOFT_RESET);
>> +	timeout = 0;
>> +	while (true) {
> 
> 	while (++timeout < 100) {
> 
>> +		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
>> +		if ((val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK) ||
>> +							timeout > 100) {
>> +			if (val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK)
>> +				break;
> 
> 
> Duplicated needlessly.
Actually have the sequence like that.
First we have to set mmACP_SOFT_RESET with 1 then we need to check its 
effect from reading same register and wait till timeout if error occurs 
and then immediatly we need to reset with 0 and read the reset register 
if it is not reset we will wait till timeout and exit with error.

Will address this by changing the duplication code thanks.
> 
>> +			return -ENODEV;
>> +		}
>> +		timeout++;
>> +		cpu_relax();
>> +	}
> 
> 
> 	if (timeout == 100)
> 		return -ENODEV;
> 
>> +	rv_writel(0, acp3x_base + mmACP_SOFT_RESET);
>> +	timeout = 0;
>> +	while (true) {
>> +		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
> 
> Split the "if (!val) break;" into it's own condition instead of part of
> the ||.
> 
Will address this thanks.
>> +		if (!val || timeout > 100) {
>> +			if (!val)
>> +				break;
>> +			return -ENODEV;
>> +		}
>> +		timeout++;
>> +		cpu_relax();
>> +	}
>> +	return 0;
>> +}
>> +
>> +static int acp3x_init(void __iomem *acp3x_base)
>> +{
>> +	int ret;
>> +
>> +	/* power on */
>> +	ret = acp3x_power_on(acp3x_base);
>> +	if (ret) {
>> +		pr_err("ACP3x power on failed\n");
>> +		return ret;
>> +	}
>> +	/* Reset */
>> +	ret = acp3x_reset(acp3x_base);
>> +	if (ret) {
>> +		pr_err("ACP3x reset failed\n");
>> +		return ret;
>> +	}
>> +	return 0;
>> +}
>> +
>> +static int acp3x_deinit(void __iomem *acp3x_base)
>> +{
>> +	int ret;
>> +
>> +	/* Reset */
>> +	ret = acp3x_reset(acp3x_base);
>> +	if (ret) {
>> +		pr_err("ACP3x reset failed\n");
>> +		return ret;
>> +	}
>> +	/* power off */
>> +	ret = acp3x_power_off(acp3x_base);
>> +	if (ret) {
>> +		pr_err("ACP3x power off failed\n");
>> +		return ret;
>> +	}
>> +	return 0;
>> +}
>> +
>>   static int snd_acp3x_probe(struct pci_dev *pci,
>>   			   const struct pci_device_id *pci_id)
>>   {
>>   	int ret;
>> -	u32 addr, val, i;
>> +	u32 addr, val, i, status;
>>   	struct acp3x_dev_data *adata;
>>   	struct platform_device_info pdevinfo[ACP3x_DEVS];
>>   	unsigned int irqflags;
>> @@ -63,6 +192,10 @@ static int snd_acp3x_probe(struct pci_dev *pci,
>>   	}
>>   	pci_set_master(pci);
>>   	pci_set_drvdata(pci, adata);
>> +	status = acp3x_init(adata->acp3x_base);
>> +	if (status)
>> +		return -ENODEV;
> 
> Why do we need both "status" and "ret".  Preserve the error code?
> 
Will address this thanks.
>> +
>>   
>>   	val = rv_readl(adata->acp3x_base + mmACP_I2S_PIN_CONFIG);
>>   	switch (val) {
>> @@ -132,6 +265,11 @@ static int snd_acp3x_probe(struct pci_dev *pci,
>>   	return 0;
>>   
>>   unmap_mmio:
>> +	status = acp3x_deinit(adata->acp3x_base);
>> +	if (status)
>> +		dev_err(&pci->dev, "ACP de-init failed\n");
>> +	else
>> +		dev_info(&pci->dev, "ACP de-initialized\n");
>>   	for (i = 0 ; i < ACP3x_DEVS ; i++)
>>   		platform_device_unregister(adata->pdev[i]);
>>   	kfree(adata->res);
>> @@ -153,6 +291,11 @@ static void snd_acp3x_remove(struct pci_dev *pci)
>>   		for (i = 0 ; i <  ACP3x_DEVS ; i++)
>>   			platform_device_unregister(adata->pdev[i]);
>>   	}
>> +	i = acp3x_deinit(adata->acp3x_base);
> 
> Please don't re-use "i" like this.  Declare "ret" or "status" or
> something.
> 
Will address this thanks.
>> +	if (i)
>> +		dev_err(&pci->dev, "ACP de-init failed\n");
>> +	else
>> +		dev_info(&pci->dev, "ACP de-initialized\n");
>>   	iounmap(adata->acp3x_base);
>>   
>>   	pci_disable_msi(pci);
> 
> regards,
> dan carpenter
> 
Regards,
Vishnu

Patch
diff mbox series

diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c
index a000ac4..11189ac 100644
--- a/sound/soc/amd/raven/acp3x-pcm-dma.c
+++ b/sound/soc/amd/raven/acp3x-pcm-dma.c
@@ -58,106 +58,6 @@  static const struct snd_pcm_hardware acp3x_pcm_hardware_capture = {
 	.periods_max = CAPTURE_MAX_NUM_PERIODS,
 };
 
-static int acp3x_power_on(void __iomem *acp3x_base, bool on)
-{
-	u16 val, mask;
-	u32 timeout;
-
-	if (on == true) {
-		val = 1;
-		mask = ACP3x_POWER_ON;
-	} else {
-		val = 0;
-		mask = ACP3x_POWER_OFF;
-	}
-
-	rv_writel(val, acp3x_base + mmACP_PGFSM_CONTROL);
-	timeout = 0;
-	while (true) {
-		val = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
-		if ((val & ACP3x_POWER_OFF_IN_PROGRESS) == mask)
-			break;
-		if (timeout > 100) {
-			pr_err("ACP3x power state change failure\n");
-			return -ENODEV;
-		}
-		timeout++;
-		cpu_relax();
-	}
-	return 0;
-}
-
-static int acp3x_reset(void __iomem *acp3x_base)
-{
-	u32 val, timeout;
-
-	rv_writel(1, acp3x_base + mmACP_SOFT_RESET);
-	timeout = 0;
-	while (true) {
-		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
-		if ((val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK) ||
-		     timeout > 100) {
-			if (val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK)
-				break;
-			return -ENODEV;
-		}
-		timeout++;
-		cpu_relax();
-	}
-
-	rv_writel(0, acp3x_base + mmACP_SOFT_RESET);
-	timeout = 0;
-	while (true) {
-		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
-		if (!val || timeout > 100) {
-			if (!val)
-				break;
-			return -ENODEV;
-		}
-		timeout++;
-		cpu_relax();
-	}
-	return 0;
-}
-
-static int acp3x_init(void __iomem *acp3x_base)
-{
-	int ret;
-
-	/* power on */
-	ret = acp3x_power_on(acp3x_base, true);
-	if (ret) {
-		pr_err("ACP3x power on failed\n");
-		return ret;
-	}
-	/* Reset */
-	ret = acp3x_reset(acp3x_base);
-	if (ret) {
-		pr_err("ACP3x reset failed\n");
-		return ret;
-	}
-	return 0;
-}
-
-static int acp3x_deinit(void __iomem *acp3x_base)
-{
-	int ret;
-
-	/* Reset */
-	ret = acp3x_reset(acp3x_base);
-	if (ret) {
-		pr_err("ACP3x reset failed\n");
-		return ret;
-	}
-	/* power off */
-	ret = acp3x_power_on(acp3x_base, false);
-	if (ret) {
-		pr_err("ACP3x power off failed\n");
-		return ret;
-	}
-	return 0;
-}
-
 static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
 {
 	u16 play_flag, cap_flag;
@@ -555,63 +455,37 @@  static int acp3x_audio_probe(struct platform_device *pdev)
 	adata->i2ssp_capture_stream = NULL;
 
 	dev_set_drvdata(&pdev->dev, adata);
-	/* Initialize ACP */
-	status = acp3x_init(adata->acp3x_base);
-	if (status)
-		return -ENODEV;
 	status = devm_snd_soc_register_component(&pdev->dev,
 						 &acp3x_i2s_component,
 						 NULL, 0);
 	if (status) {
 		dev_err(&pdev->dev, "Fail to register acp i2s component\n");
-		goto dev_err;
+		return -ENODEV;
 	}
 	status = devm_request_irq(&pdev->dev, adata->i2s_irq, i2s_irq_handler,
 				  irqflags, "ACP3x_I2S_IRQ", adata);
 	if (status) {
 		dev_err(&pdev->dev, "ACP3x I2S IRQ request failed\n");
-		goto dev_err;
+		return -ENODEV;
 	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 10000);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 	return 0;
-dev_err:
-	status = acp3x_deinit(adata->acp3x_base);
-	if (status)
-		dev_err(&pdev->dev, "ACP de-init failed\n");
-	else
-		dev_info(&pdev->dev, "ACP de-initialized\n");
-	/*ignore device status and return driver probe error*/
-	return -ENODEV;
 }
 
 static int acp3x_audio_remove(struct platform_device *pdev)
 {
-	int ret;
-	struct i2s_dev_data *adata = dev_get_drvdata(&pdev->dev);
-
-	ret = acp3x_deinit(adata->acp3x_base);
-	if (ret)
-		dev_err(&pdev->dev, "ACP de-init failed\n");
-	else
-		dev_info(&pdev->dev, "ACP de-initialized\n");
-
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
 
 static int acp3x_resume(struct device *dev)
 {
-	int status;
 	u32 val;
 	struct i2s_dev_data *adata = dev_get_drvdata(dev);
 
-	status = acp3x_init(adata->acp3x_base);
-	if (status)
-		return -ENODEV;
-
 	if (adata->play_stream && adata->play_stream->runtime) {
 		struct i2s_stream_instance *rtd =
 			adata->play_stream->runtime->private_data;
@@ -656,15 +530,8 @@  static int acp3x_resume(struct device *dev)
 
 static int acp3x_pcm_runtime_suspend(struct device *dev)
 {
-	int status;
 	struct i2s_dev_data *adata = dev_get_drvdata(dev);
 
-	status = acp3x_deinit(adata->acp3x_base);
-	if (status)
-		dev_err(dev, "ACP de-init failed\n");
-	else
-		dev_info(dev, "ACP de-initialized\n");
-
 	rv_writel(0, adata->acp3x_base + mmACP_EXTERNAL_INTR_ENB);
 
 	return 0;
@@ -672,12 +539,8 @@  static int acp3x_pcm_runtime_suspend(struct device *dev)
 
 static int acp3x_pcm_runtime_resume(struct device *dev)
 {
-	int status;
 	struct i2s_dev_data *adata = dev_get_drvdata(dev);
 
-	status = acp3x_init(adata->acp3x_base);
-	if (status)
-		return -ENODEV;
 	rv_writel(1, adata->acp3x_base + mmACP_EXTERNAL_INTR_ENB);
 	return 0;
 }
diff --git a/sound/soc/amd/raven/acp3x.h b/sound/soc/amd/raven/acp3x.h
index dba7065..48669f4 100644
--- a/sound/soc/amd/raven/acp3x.h
+++ b/sound/soc/amd/raven/acp3x.h
@@ -65,6 +65,13 @@ 
 #define SLOT_WIDTH_16 0x10
 #define SLOT_WIDTH_24 0x18
 #define SLOT_WIDTH_32 0x20
+#define ACP_PGFSM_CNTL_POWER_ON_MASK	0x01
+#define ACP_PGFSM_CNTL_POWER_OFF_MASK	0x00
+#define ACP_PGFSM_STATUS_MASK		0x03
+#define ACP_POWERED_ON			0x00
+#define ACP_POWER_ON_IN_PROGRESS	0x01
+#define ACP_POWERED_OFF			0x02
+#define ACP_POWER_OFF_IN_PROGRESS	0x03
 
 struct acp3x_platform_info {
 	u16 play_i2s_instance;
diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c
index 7f435b3..b74ecf6 100644
--- a/sound/soc/amd/raven/pci-acp3x.c
+++ b/sound/soc/amd/raven/pci-acp3x.c
@@ -19,11 +19,140 @@  struct acp3x_dev_data {
 	struct platform_device *pdev[ACP3x_DEVS];
 };
 
+static int acp3x_power_on(void __iomem *acp3x_base)
+{
+	u32 val;
+	u32 timeout = 0;
+	int ret = 0;
+
+	val = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
+	if (val) {
+		if (!((val & ACP_PGFSM_STATUS_MASK) ==
+				ACP_POWER_ON_IN_PROGRESS))
+			rv_writel(ACP_PGFSM_CNTL_POWER_ON_MASK,
+				acp3x_base + mmACP_PGFSM_CONTROL);
+		while (true) {
+			val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
+			if (!val)
+				break;
+			udelay(1);
+			if (timeout > 500) {
+				pr_err("ACP is Not Powered ON\n");
+				ret = -ETIMEDOUT;
+				break;
+			}
+			timeout++;
+		}
+		if (ret) {
+			pr_err("ACP is not powered on status:%d\n", ret);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static int acp3x_power_off(void __iomem *acp3x_base)
+{
+	u32 val;
+	u32 timeout = 0;
+	int ret = 0;
+
+	val = rv_readl(acp3x_base + mmACP_PGFSM_CONTROL);
+	rv_writel(ACP_PGFSM_CNTL_POWER_OFF_MASK,
+			acp3x_base + mmACP_PGFSM_CONTROL);
+	while (true) {
+		val  = rv_readl(acp3x_base + mmACP_PGFSM_STATUS);
+		if ((val & ACP_PGFSM_STATUS_MASK) == ACP_POWERED_OFF)
+			break;
+		udelay(1);
+		if (timeout > 500) {
+			pr_err("ACP is Not Powered OFF\n");
+			ret = -ETIMEDOUT;
+			break;
+		}
+		timeout++;
+	}
+	if (ret)
+		pr_err("ACP is not powered off status:%d\n", ret);
+	return ret;
+}
+
+
+static int acp3x_reset(void __iomem *acp3x_base)
+{
+	u32 val, timeout;
+
+	rv_writel(1, acp3x_base + mmACP_SOFT_RESET);
+	timeout = 0;
+	while (true) {
+		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
+		if ((val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK) ||
+							timeout > 100) {
+			if (val & ACP3x_SOFT_RESET__SoftResetAudDone_MASK)
+				break;
+			return -ENODEV;
+		}
+		timeout++;
+		cpu_relax();
+	}
+	rv_writel(0, acp3x_base + mmACP_SOFT_RESET);
+	timeout = 0;
+	while (true) {
+		val = rv_readl(acp3x_base + mmACP_SOFT_RESET);
+		if (!val || timeout > 100) {
+			if (!val)
+				break;
+			return -ENODEV;
+		}
+		timeout++;
+		cpu_relax();
+	}
+	return 0;
+}
+
+static int acp3x_init(void __iomem *acp3x_base)
+{
+	int ret;
+
+	/* power on */
+	ret = acp3x_power_on(acp3x_base);
+	if (ret) {
+		pr_err("ACP3x power on failed\n");
+		return ret;
+	}
+	/* Reset */
+	ret = acp3x_reset(acp3x_base);
+	if (ret) {
+		pr_err("ACP3x reset failed\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int acp3x_deinit(void __iomem *acp3x_base)
+{
+	int ret;
+
+	/* Reset */
+	ret = acp3x_reset(acp3x_base);
+	if (ret) {
+		pr_err("ACP3x reset failed\n");
+		return ret;
+	}
+	/* power off */
+	ret = acp3x_power_off(acp3x_base);
+	if (ret) {
+		pr_err("ACP3x power off failed\n");
+		return ret;
+	}
+	return 0;
+}
+
 static int snd_acp3x_probe(struct pci_dev *pci,
 			   const struct pci_device_id *pci_id)
 {
 	int ret;
-	u32 addr, val, i;
+	u32 addr, val, i, status;
 	struct acp3x_dev_data *adata;
 	struct platform_device_info pdevinfo[ACP3x_DEVS];
 	unsigned int irqflags;
@@ -63,6 +192,10 @@  static int snd_acp3x_probe(struct pci_dev *pci,
 	}
 	pci_set_master(pci);
 	pci_set_drvdata(pci, adata);
+	status = acp3x_init(adata->acp3x_base);
+	if (status)
+		return -ENODEV;
+
 
 	val = rv_readl(adata->acp3x_base + mmACP_I2S_PIN_CONFIG);
 	switch (val) {
@@ -132,6 +265,11 @@  static int snd_acp3x_probe(struct pci_dev *pci,
 	return 0;
 
 unmap_mmio:
+	status = acp3x_deinit(adata->acp3x_base);
+	if (status)
+		dev_err(&pci->dev, "ACP de-init failed\n");
+	else
+		dev_info(&pci->dev, "ACP de-initialized\n");
 	for (i = 0 ; i < ACP3x_DEVS ; i++)
 		platform_device_unregister(adata->pdev[i]);
 	kfree(adata->res);
@@ -153,6 +291,11 @@  static void snd_acp3x_remove(struct pci_dev *pci)
 		for (i = 0 ; i <  ACP3x_DEVS ; i++)
 			platform_device_unregister(adata->pdev[i]);
 	}
+	i = acp3x_deinit(adata->acp3x_base);
+	if (i)
+		dev_err(&pci->dev, "ACP de-init failed\n");
+	else
+		dev_info(&pci->dev, "ACP de-initialized\n");
 	iounmap(adata->acp3x_base);
 
 	pci_disable_msi(pci);