[9/9] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera
diff mbox series

Message ID 20191018154849.3127-10-bparrot@ti.com
State Superseded
Headers show
Series
  • ARM: dts: dra7: add cal nodes
Related show

Commit Message

Benoit Parrot Oct. 18, 2019, 3:48 p.m. UTC
Add support for the OV5640 CSI camera:
- add the OV5640 nodes
- add the CAL node linkage
- enable CAL node

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 .../arm64/boot/dts/ti/k3-am654-base-board.dts | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1102b84f853d..918601c18f85 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -53,6 +53,12 @@ 
 			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	clk_ov5640_fixed: clk_ov5640_fixed {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &wkup_pmx0 {
@@ -184,6 +190,23 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &main_i2c2 {
@@ -280,3 +303,16 @@ 
 &pcie1_ep {
 	status = "disabled";
 };
+
+&cal {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint@0 {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
+