linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <linux-arm-kernel@lists.infradead.org>,
	<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>
Cc: <ludovic.desroches@microchip.com>, <linus.walleij@linaro.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<robh+dt@kernel.org>, <claudiu.beznea@microchip.com>,
	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: [PATCH] pinctrl: at91: Enable slewrate by default on SAM9X60
Date: Thu, 24 Oct 2019 20:22:34 +0300	[thread overview]
Message-ID: <20191024172234.5267-1-codrin.ciubotariu@microchip.com> (raw)

On SAM9X60, slewrate should be enabled on pins with a switching frequency
below 50Mhz. Since most of our pins do not exceed this value, we enable
slewrate by default. Pins with a switching value that exceeds 50Mhz will
have to explicitly disable slewrate.

Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 drivers/pinctrl/pinctrl-at91.c     | 4 ++--
 include/dt-bindings/pinctrl/at91.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 117075b5798f..c135149e84e9 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -85,8 +85,8 @@ enum drive_strength_bit {
 					 DRIVE_STRENGTH_SHIFT)
 
 enum slewrate_bit {
-	SLEWRATE_BIT_DIS,
 	SLEWRATE_BIT_ENA,
+	SLEWRATE_BIT_DIS,
 };
 
 #define SLEWRATE_BIT_MSK(name)		(SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
@@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin,
 {
 	unsigned int tmp;
 
-	if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA)
+	if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS)
 		return;
 
 	tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 3831f91fb3ba..e8e117306b1b 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -27,8 +27,8 @@
 #define AT91_PINCTRL_DRIVE_STRENGTH_MED			(0x2 << 5)
 #define AT91_PINCTRL_DRIVE_STRENGTH_HI			(0x3 << 5)
 
-#define AT91_PINCTRL_SLEWRATE_DIS	(0x0 << 9)
-#define AT91_PINCTRL_SLEWRATE_ENA	(0x1 << 9)
+#define AT91_PINCTRL_SLEWRATE_ENA	(0x0 << 9)
+#define AT91_PINCTRL_SLEWRATE_DIS	(0x1 << 9)
 
 #define AT91_PIOA	0
 #define AT91_PIOB	1
-- 
2.20.1


             reply	other threads:[~2019-10-24 17:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 17:22 Codrin Ciubotariu [this message]
2019-10-29 21:37 ` [PATCH] pinctrl: at91: Enable slewrate by default on SAM9X60 Rob Herring
2019-10-30  8:53   ` Ludovic Desroches
2019-10-30 13:15     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024172234.5267-1-codrin.ciubotariu@microchip.com \
    --to=codrin.ciubotariu@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).