linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Eric Auger <eric.auger@redhat.com>,
	James Morse <james.morse@arm.com>,
	Julien Thierry <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Murray <Andrew.Murray@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Jayachandran C <jnair@marvell.com>,
	Robert Richter <rrichter@marvell.com>
Subject: [PATCH v2 23/36] irqchip/gic-v4.1: Map the ITS SGIR register page
Date: Sun, 27 Oct 2019 14:42:21 +0000	[thread overview]
Message-ID: <20191027144234.8395-24-maz@kernel.org> (raw)
In-Reply-To: <20191027144234.8395-1-maz@kernel.org>

One of the new features of GICv4.1 is to allow virtual SGIs to be
directly signaled to a VPE. For that, the ITS has grown a new
64kB page containing only a single register that is used to
signal a SGI to a given VPE.

Add a second mapping covering this new 64kB range, and take this
opportunity to limit the original mapping to 64kB, which is enough
to cover the span of the ITS registers.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 6483f8051b3e..991a70b457b4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -97,6 +97,7 @@ struct its_node {
 	struct mutex		dev_alloc_lock;
 	struct list_head	entry;
 	void __iomem		*base;
+	void __iomem		*sgir_base;
 	phys_addr_t		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
@@ -4166,7 +4167,7 @@ static int __init its_probe_one(struct resource *res,
 	struct page *page;
 	int err;
 
-	its_base = ioremap(res->start, resource_size(res));
+	its_base = ioremap(res->start, SZ_64K);
 	if (!its_base) {
 		pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start);
 		return -ENOMEM;
@@ -4217,6 +4218,13 @@ static int __init its_probe_one(struct resource *res,
 
 		if (is_v4_1(its)) {
 			u32 svpet = FIELD_GET(GITS_TYPER_SVPET, typer);
+
+			its->sgir_base = ioremap(res->start + SZ_128K, SZ_64K);
+			if (!its->sgir_base) {
+				err = -ENOMEM;
+				goto out_free_its;
+			}
+
 			its->mpidr = readl_relaxed(its_base + GITS_MPIDR);
 
 			pr_info("ITS@%pa: Using GICv4.1 mode %08x %08x\n",
@@ -4230,7 +4238,7 @@ static int __init its_probe_one(struct resource *res,
 				get_order(ITS_CMD_QUEUE_SZ));
 	if (!page) {
 		err = -ENOMEM;
-		goto out_free_its;
+		goto out_unmap_sgir;
 	}
 	its->cmd_base = (void *)page_address(page);
 	its->cmd_write = its->cmd_base;
@@ -4297,6 +4305,9 @@ static int __init its_probe_one(struct resource *res,
 	its_free_tables(its);
 out_free_cmd:
 	free_pages((unsigned long)its->cmd_base, get_order(ITS_CMD_QUEUE_SZ));
+out_unmap_sgir:
+	if (its->sgir_base)
+		iounmap(its->sgir_base);
 out_free_its:
 	kfree(its);
 out_unmap:
-- 
2.20.1


  parent reply	other threads:[~2019-10-27 14:45 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-27 14:41 [PATCH v2 00/36] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-10-27 14:41 ` [PATCH v2 01/36] KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 02/36] irqchip/gic-v3-its: Factor out wait_for_syncr primitive Marc Zyngier
2019-10-28  9:20   ` Zenghui Yu
2019-11-20 13:21   ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 03/36] irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface Marc Zyngier
2019-10-31  8:49   ` Zenghui Yu
2019-11-01 13:26     ` Marc Zyngier
2019-11-05 10:30       ` Zenghui Yu
2019-11-05 12:12         ` Marc Zyngier
2019-11-20 13:21   ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 04/36] irqchip/gic-v3-its: Make is_v4 use a TYPER copy Marc Zyngier
2019-10-28  9:34   ` Zenghui Yu
2019-10-28 10:52     ` Marc Zyngier
2019-11-20 13:21   ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 05/36] irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead Marc Zyngier
2019-10-28  9:40   ` Zenghui Yu
2019-11-20 13:21   ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 06/36] irqchip/gic-v3-its: Kill its->device_ids " Marc Zyngier
2019-10-31  6:33   ` Zenghui Yu
2019-10-31  8:30     ` Marc Zyngier
2019-10-31  9:08       ` Zenghui Yu
2019-11-20 13:21   ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 07/36] irqchip/gic-v3-its: Add get_vlpi_map() helper Marc Zyngier
2019-10-31  3:54   ` Zenghui Yu
2019-11-20 13:21   ` [tip: irq/core] irqchip/gic-v3-its: Add its_vlpi_map helpers tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 08/36] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2019-10-31 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 09/36] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2019-10-31 12:02   ` Zenghui Yu
2019-11-01 15:13     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 10/36] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-15  9:55   ` [tip: irq/urgent] irqchip/gic-v3: Workaround Cavium erratum 38539 " tip-bot2 for Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 11/36] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2019-12-24  7:10   ` Zenghui Yu
2019-12-24  9:19     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 12/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2019-11-01 10:58   ` Zenghui Yu
2019-11-13  8:02   ` Zenghui Yu
2019-11-13  9:47     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 13/36] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2019-11-01 11:05   ` Zenghui Yu
2019-12-18 14:39     ` Marc Zyngier
2019-12-19  3:05       ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 14/36] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2019-11-01 11:10   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 15/36] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2019-11-01 11:13   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 16/36] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2019-11-01 11:23   ` Zenghui Yu
2019-12-18 15:06     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 17/36] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2019-11-01 11:34   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 18/36] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2019-11-01 11:39   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 19/36] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2019-11-01 11:51   ` Zenghui Yu
2019-12-18 14:18     ` Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 20/36] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2019-11-01 12:17   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 21/36] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2019-11-01 12:30   ` Zenghui Yu
2019-10-27 14:42 ` [PATCH v2 22/36] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-11-01 12:55   ` Zenghui Yu
2019-12-18 14:48     ` Marc Zyngier
2019-10-27 14:42 ` Marc Zyngier [this message]
2019-10-27 14:42 ` [PATCH v2 24/36] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 25/36] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 26/36] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 27/36] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 28/36] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 29/36] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 30/36] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 31/36] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 32/36] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 33/36] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 34/36] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 35/36] KVM: arm64: GICv4.1: Configure SGIs as HW interrupts Marc Zyngier
2019-10-27 14:42 ` [PATCH v2 36/36] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191027144234.8395-24-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=Andrew.Murray@arm.com \
    --cc=eric.auger@redhat.com \
    --cc=james.morse@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=jnair@marvell.com \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rrichter@marvell.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tglx@linutronix.de \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).