[1/2] dt-bindings: iio: stm32-adc: add max clock rate property
diff mbox series

Message ID 1572279108-25916-2-git-send-email-fabrice.gasnier@st.com
State Accepted
Commit a1acbc223a0c000edc5353f0710d0001772c158d
Headers show
Series
  • iio: adc: stm32: add max clock rate
Related show

Commit Message

Fabrice Gasnier Oct. 28, 2019, 4:11 p.m. UTC
Add optional dt property to tune maximum desired analog clock rate.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring Nov. 6, 2019, 3:29 a.m. UTC | #1
On Mon, 28 Oct 2019 17:11:47 +0100, Fabrice Gasnier wrote:
> Add optional dt property to tune maximum desired analog clock rate.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Jonathan Cameron Nov. 9, 2019, 12:36 p.m. UTC | #2
On Tue, 5 Nov 2019 21:29:17 -0600
Rob Herring <robh@kernel.org> wrote:

> On Mon, 28 Oct 2019 17:11:47 +0100, Fabrice Gasnier wrote:
> > Add optional dt property to tune maximum desired analog clock rate.
> > 
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> > ---
> >  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >   
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to the togreg branch of iio.git.  Whether I get a pull request
out for this cycle or this hits early in next is dependent on whether
Linus hints at an rc8 and gives an extra week.

Thanks,

Jonathan

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 4c0da8c..8de9331 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -53,6 +53,8 @@  Optional properties:
   analog input switches on stm32mp1.
 - st,syscfg: Phandle to system configuration controller. It can be used to
   control the analog circuitry on stm32mp1.
+- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
+  circuitry.
 
 Contents of a stm32 adc child node:
 -----------------------------------