From: Jiada Wang <jiada_wang@mentor.com>
To: <jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<rydberg@bitmath.org>, <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jiada_wang@mentor.com>, <erosca@de.adit-jv.com>,
<Andrew_Gabbasov@mentor.com>
Subject: [PATCH v4 48/48] Input: atmel_mxt_ts - Fix compilation warning
Date: Tue, 29 Oct 2019 16:20:10 +0900 [thread overview]
Message-ID: <20191029072010.8492-49-jiada_wang@mentor.com> (raw)
In-Reply-To: <20191029072010.8492-1-jiada_wang@mentor.com>
fix "make W=1" compilation warnings from Atmel driver
as per the compilation logs.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f89382343c08..5cf303371103 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2049,7 +2049,7 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
byte_offset = reg + i - cfg->start_ofs;
- if (byte_offset >= 0 && byte_offset < cfg->mem_size) {
+ if (byte_offset < cfg->mem_size) {
*(cfg->mem + byte_offset) = val;
} else {
dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
--
2.17.1
prev parent reply other threads:[~2019-10-29 7:23 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 7:19 [PATCH v4 00/48] atmel_mxt_ts misc Jiada Wang
2019-10-29 7:19 ` [PATCH v4 01/48] Input: introduce input_mt_report_slot_inactive Jiada Wang
2019-10-29 17:13 ` Henrik Rydberg
2019-10-30 23:23 ` Dmitry Torokhov
2019-10-31 8:01 ` Henrik Rydberg
2019-11-06 5:00 ` Jiada Wang
2019-10-29 7:19 ` [PATCH v4 02/48] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2019-10-29 7:19 ` [PATCH v4 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2019-10-29 7:19 ` [PATCH v4 04/48] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2019-10-29 7:19 ` [PATCH v4 05/48] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2019-10-29 7:19 ` [PATCH v4 06/48] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2019-10-29 7:19 ` [PATCH v4 07/48] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2019-10-29 7:19 ` [PATCH v4 08/48] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2019-10-29 7:19 ` [PATCH v4 09/48] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2019-10-29 7:19 ` [PATCH v4 10/48] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2019-10-29 7:19 ` [PATCH v4 11/48] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2019-10-31 1:36 ` kbuild test robot
2019-10-29 7:19 ` [PATCH v4 12/48] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2019-10-29 7:19 ` [PATCH v4 13/48] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2019-10-29 7:19 ` [PATCH v4 14/48] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2019-10-29 7:19 ` [PATCH v4 15/48] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2019-10-29 7:19 ` [PATCH v4 16/48] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2019-10-29 7:19 ` [PATCH v4 17/48] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2019-10-29 7:19 ` [PATCH v4 18/48] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2019-10-29 7:19 ` [PATCH v4 19/48] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2019-10-29 7:19 ` [PATCH v4 20/48] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2019-10-29 7:19 ` [PATCH v4 21/48] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2019-10-29 7:19 ` [PATCH v4 22/48] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2019-10-29 7:19 ` [PATCH v4 23/48] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2019-10-29 7:19 ` [PATCH v4 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2019-10-31 5:42 ` Nathan Chancellor
2019-10-29 7:19 ` [PATCH v4 25/48] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2019-10-29 7:19 ` [PATCH v4 26/48] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2019-10-29 7:19 ` [PATCH v4 27/48] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2019-10-29 7:19 ` [PATCH v4 28/48] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2019-10-29 7:19 ` [PATCH v4 29/48] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2019-10-29 7:19 ` [PATCH v4 30/48] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2019-10-29 7:19 ` [PATCH v4 31/48] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2019-10-29 7:19 ` [PATCH v4 32/48] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2019-10-29 7:19 ` [PATCH v4 33/48] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2019-10-29 7:19 ` [PATCH v4 34/48] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2019-10-29 7:19 ` [PATCH v4 35/48] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2019-10-29 7:19 ` [PATCH v4 36/48] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2019-10-29 7:19 ` [PATCH v4 37/48] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2019-10-29 7:20 ` [PATCH v4 38/48] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2019-10-29 7:20 ` [PATCH v4 39/48] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2019-10-29 7:20 ` [PATCH v4 40/48] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2019-10-29 7:20 ` [PATCH v4 41/48] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2019-10-29 7:20 ` [PATCH v4 42/48] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2019-10-29 7:20 ` [PATCH v4 43/48] Input: Atmel: use T44 object to process " Jiada Wang
2019-10-29 7:20 ` [PATCH v4 44/48] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2019-10-29 7:20 ` [PATCH v4 45/48] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2019-10-29 7:20 ` [PATCH v4 46/48] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2019-10-29 7:20 ` [PATCH v4 47/48] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2019-10-29 7:20 ` Jiada Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029072010.8492-49-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).