From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Icenowy Zheng <icenowy@aosc.io>,
Thomas Gleixner <tglx@linutronix.de>,
Arnd Bergmann <arnd@arndb.de>
Cc: Ondrej Jirman <megous@megous.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
Date: Tue, 29 Oct 2019 21:17:41 +0100 [thread overview]
Message-ID: <20191029201741.3820913-5-megous@megous.com> (raw)
In-Reply-To: <20191029201741.3820913-1-megous@megous.com>
Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
port. All four ports are exposed via USB3-A connectors. VBUS is
always on, since it's powered directly from DCIN (VCC-5V) and
not switchable.
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 2557cc6c8d50..32800204c22a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -95,6 +95,10 @@
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -304,3 +308,7 @@
usb3_vbus-supply = <®_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
--
2.23.0
prev parent reply other threads:[~2019-10-29 20:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 20:17 [PATCH v3 0/4] Add USB 3 support for H6 and Orange Pi 3 Ondrej Jirman
2019-10-29 20:17 ` [PATCH v3 1/4] dt-bindings: Add bindings for USB3 phy on Allwinner H6 Ondrej Jirman
2019-10-29 20:17 ` [PATCH v3 2/4] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC Ondrej Jirman
2019-10-29 20:17 ` [PATCH v3 3/4] arm64: dts: allwinner: h6: add USB3 device nodes Ondrej Jirman
2019-10-29 20:17 ` Ondrej Jirman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029201741.3820913-5-megous@megous.com \
--to=megous@megous.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=icenowy@aosc.io \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).