linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <vigneshr@ti.com>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<Tudor.Ambarus@microchip.com>
Subject: [PATCH v4 15/20] mtd: spi-nor: Extend the QE Read Back test to both SR1 and SR2
Date: Sat, 2 Nov 2019 11:23:50 +0000	[thread overview]
Message-ID: <20191102112316.20715-16-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20191102112316.20715-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

In case of 16-bit Write Status Register, check that both SR1 and
SR2 were written correctly.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 08fd2c97897d..8f11c00e8ae5 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2067,6 +2067,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
 {
 	u8 *sr_cr = nor->bouncebuf;
 	int ret;
+	u8 sr_written;
 
 	/* Keep the current value of the Status Register. */
 	ret = spi_nor_read_sr(nor, sr_cr);
@@ -2075,7 +2076,22 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
 
 	sr_cr[1] = CR_QUAD_EN_SPAN;
 
-	return spi_nor_write_sr(nor, sr_cr, 2);
+	ret = spi_nor_write_sr(nor, sr_cr, 2);
+	if (ret)
+		return ret;
+
+	sr_written = sr_cr[0];
+
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	if (sr_cr[0] != sr_written) {
+		dev_err(nor->dev, "SR: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
 }
 
 /**
@@ -2116,6 +2132,17 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
+	sr_written = sr_cr[0];
+
+	ret = spi_nor_read_sr(nor, sr_cr);
+	if (ret)
+		return ret;
+
+	if (sr_written != sr_cr[0]) {
+		dev_err(nor->dev, "SR: Read back test failed\n");
+		return -EIO;
+	}
+
 	sr_written = sr_cr[1];
 
 	/* Read back and check it. */
-- 
2.9.5


  parent reply	other threads:[~2019-11-02 11:24 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-02 11:23 [PATCH v4 00/20] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 01/20] mtd: spi-nor: Use dev_dbg insted of dev_err for low level info Tudor.Ambarus
2019-11-05 12:12   ` Vignesh Raghavendra
2019-11-06  7:07     ` Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 02/20] mtd: spi-nor: Print debug info inside Reg Ops methods Tudor.Ambarus
2019-11-05 12:13   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 03/20] mtd: spi-nor: Check for errors after each Register Operation Tudor.Ambarus
2019-11-06  9:19   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 04/20] mtd: spi-nor: Rename label as it is no longer generic Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 05/20] mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr() Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 06/20] mtd: spi-nor: Move the WE and wait calls inside Write SR methods Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 07/20] mtd: spi-nor: Merge spi_nor_write_sr() and spi_nor_write_sr_cr() Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 08/20] mtd: spi-nor: Describe all the Reg Ops Tudor.Ambarus
2019-11-05 12:21   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 09/20] mtd: spi-nor: Drop spansion_quad_enable() Tudor.Ambarus
2019-11-05 12:35   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 10/20] mtd: spi-nor: Fix errno on Quad Enable methods Tudor.Ambarus
2019-11-05 12:36   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 11/20] mtd: spi-nor: Check all the bits written, not just the BP ones Tudor.Ambarus
2019-11-05 12:21   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 12/20] mtd: spi-nor: Print debug message when the read back test fails Tudor.Ambarus
2019-11-05 12:37   ` Vignesh Raghavendra
2019-11-06  7:24     ` Tudor.Ambarus
2019-11-06  7:39       ` Vignesh Raghavendra
2019-11-07  5:58         ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 13/20] mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() Tudor.Ambarus
2019-11-05 17:07   ` Vignesh Raghavendra
2019-11-06  8:33     ` Tudor.Ambarus
2019-11-06 16:26       ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 14/20] mtd: spi-nor: Extend the QE Read Back test to the entire SR byte Tudor.Ambarus
2019-11-02 11:23 ` Tudor.Ambarus [this message]
2019-11-05 16:06   ` [PATCH v4 15/20] mtd: spi-nor: Extend the QE Read Back test to both SR1 and SR2 Vignesh Raghavendra
2019-11-06  8:41     ` Tudor.Ambarus
2019-11-02 11:23 ` [PATCH v4 16/20] mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1 Tudor.Ambarus
2019-11-06  5:45   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 17/20] mtd: spi-nor: Merge spansion Quad Enable methods Tudor.Ambarus
2019-11-06  5:46   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 18/20] mtd: spi-nor: Rename macronix_quad_enable to spi_nor_sr1_bit6_quad_enable Tudor.Ambarus
2019-11-06  6:00   ` Vignesh Raghavendra
2019-11-02 11:23 ` [PATCH v4 19/20] mtd: spi-nor: Prepend "spi_nor_" to "sr2_bit7_quad_enable" Tudor.Ambarus
2019-11-02 11:24 ` [PATCH v4 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-11-07  6:27 ` [PATCH v4 00/20] mtd: spi-nor: Quad Enable and (un)lock methods Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191102112316.20715-16-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).