[RESEND Patch v3 02/20] dt-bindings: media: cal: update binding example

From: Benoit Parrot <bparrot@ti.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com>
Subject: [RESEND Patch v3 02/20] dt-bindings: media: cal: update binding example
Date: Tue, 12 Nov 2019 08:53:29 -0600	[thread overview]
Message-ID: <20191112145347.23519-3-bparrot@ti.com> (raw)
In-Reply-To: <20191112145347.23519-1-bparrot@ti.com>

Update binding example to show proper endpoint properties and linkage.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 .../devicetree/bindings/media/ti-cal.txt      | 31 ++++++++++---------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
index 93096d924786..7e960cf26e23 100644
--- a/Documentation/devicetree/bindings/media/ti-cal.txt
+++ b/Documentation/devicetree/bindings/media/ti-cal.txt
@@ -27,7 +27,6 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
 Example:
 	cal: cal@4845b000 {
 		compatible = "ti,dra72-cal";
-		ti,hwmods = "cal";
 		reg = <0x4845B000 0x400>,
 		      <0x4845B800 0x40>,
 		      <0x4845B900 0x40>;
@@ -45,9 +44,10 @@ Example:
 
 			csi2_0: port@0 {
 				reg = <0>;
-				endpoint {
-					slave-mode;
-					remote-endpoint = <&ar0330_1>;
+				csi2_phy0: endpoint {
+					remote-endpoint = <&csi2_cam0>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
 				};
 			};
 			csi2_1: port@1 {
@@ -57,19 +57,20 @@ Example:
 	};
 
 	i2c5: i2c@4807c000 {
-		ar0330@10 {
-			compatible = "ti,ar0330";
-			reg = <0x10>;
+		clock-frequency = <400000>;
 
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
+		camera-sensor@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+
+			clocks = <&clk_fixed>;
+			clock-names = "xclk";
 
-				ar0330_1: endpoint {
-					reg = <0>;
-					clock-lanes = <1>;
-					data-lanes = <0 2 3 4>;
-					remote-endpoint = <&csi2_0>;
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2_phy0>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
 				};
 			};
 		};
-- 
2.17.1

