From: James Tai <james.tai@realtek.com>
To: "Andreas Färber" <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"'DTML'" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-realtek-soc@lists.infradead.org"
<linux-realtek-soc@lists.infradead.org>
Subject: [PATCH v3 2/2] arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB
Date: Tue, 12 Nov 2019 15:45:22 +0000 [thread overview]
Message-ID: <73fb8106ec1a4665b59a2d187a576b71@realtek.com> (raw)
Add Device Trees for Realtek RTD1619 SoC family, RTD1619 SoC and
Realtek Mjolnir EVB.
Signed-off-by: James Tai <james.tai@realtek.com>
---
arch/arm64/boot/dts/realtek/Makefile | 2 +
.../boot/dts/realtek/rtd1619-mjolnir.dts | 40 +++++
arch/arm64/boot/dts/realtek/rtd1619.dtsi | 12 ++
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 163 ++++++++++++++++++
4 files changed, 217 insertions(+)
create mode 100644 arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1619.dtsi
create mode 100644 arch/arm64/boot/dts/realtek/rtd16xx.dtsi
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index 555638ada721..fb5f05978ecc 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -7,3 +7,5 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
new file mode 100644
index 000000000000..6ab791af3896
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+/dts-v1/;
+
+#include "rtd1619.dtsi"
+
+/ {
+ compatible = "realtek,rtd1619", "realtek,mjolnir";
+ model= "Realtek Mjolnir EVB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0; /* The UART0 is debug console */
+ serial1 = &uart1; /* The UART1 is on M.2 slot */
+ serial2 = &uart2; /* The UART2 is on GPIO connector */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart2 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
new file mode 100644
index 000000000000..e52bf708b04e
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1619 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd16xx.dtsi"
+
+/ {
+ compatible = "realtek,rtd1619";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
new file mode 100644
index 000000000000..d9b572a870f5
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD16xx SoC family
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l3>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ next-level-cache = <&l3>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ next-level-cache = <&l3>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x400>;
+ enable-method = "psci";
+ next-level-cache = <&l3>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x500>;
+ enable-method = "psci";
+ next-level-cache = <&l3>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&l3>;
+
+ };
+
+ l3: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ arm_pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "osc27M";
+ #clock-cells = <0>;
+ };
+
+ soc@98000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x98000000 0x98000000 0x68000000>;
+
+ rbus: r-bus@98000000 {
+ compatible = "simple-bus";
+ reg = <0x98000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000000 0x200000>;
+
+ uart0: serial0@7800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x7800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+
+ uart1: serial1@1b200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b200 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial2@1b400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x1b400 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@ff100000 {
+ compatible = "arm,gic-v3";
+ reg = <0xff100000 0x10000>,
+ <0xff140000 0xc0000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
+
+&arm_pmu {
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
+ <&cpu3>, <&cpu4>, <&cpu5>;
+};
--
2.24.0
next reply other threads:[~2019-11-12 15:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 15:45 James Tai [this message]
2019-11-13 23:20 ` [PATCH v3 2/2] arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB Andreas Färber
2019-11-15 14:52 ` James Tai
2019-11-15 15:29 ` Andreas Färber
2019-12-28 14:25 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=73fb8106ec1a4665b59a2d187a576b71@realtek.com \
--to=james.tai@realtek.com \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-realtek-soc@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).