From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [stable 4.19+][PATCH 15/20] ASoC: stm32: i2s: fix dma configuration
Date: Fri, 15 Nov 2019 15:33:51 -0700 [thread overview]
Message-ID: <20191115223356.27675-15-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20191115223356.27675-1-mathieu.poirier@linaro.org>
From: Olivier Moysan <olivier.moysan@st.com>
commit 1ac2bd16448997d9ec01922423486e1e85535eda upstream
DMA configuration is not balanced on start/stop.
Move DMA configuration to trigger callback.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
sound/soc/stm/stm32_i2s.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 6d0bf78d114d..449bb7049a28 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -488,7 +488,7 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
{
struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
int format = params_width(params);
- u32 cfgr, cfgr_mask, cfg1, cfg1_mask;
+ u32 cfgr, cfgr_mask, cfg1;
unsigned int fthlv;
int ret;
@@ -529,15 +529,11 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
if (ret < 0)
return ret;
- cfg1 = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
- cfg1_mask = cfg1;
-
fthlv = STM32_I2S_FIFO_SIZE * I2S_FIFO_TH_ONE_QUARTER / 4;
- cfg1 |= I2S_CFG1_FTHVL_SET(fthlv - 1);
- cfg1_mask |= I2S_CFG1_FTHVL_MASK;
+ cfg1 = I2S_CFG1_FTHVL_SET(fthlv - 1);
return regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
- cfg1_mask, cfg1);
+ I2S_CFG1_FTHVL_MASK, cfg1);
}
static int stm32_i2s_startup(struct snd_pcm_substream *substream,
@@ -589,6 +585,10 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
/* Enable i2s */
dev_dbg(cpu_dai->dev, "start I2S\n");
+ cfg1_mask = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
+ regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
+ cfg1_mask, cfg1_mask);
+
ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
I2S_CR1_SPE, I2S_CR1_SPE);
if (ret < 0) {
--
2.17.1
next prev parent reply other threads:[~2019-11-15 22:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 22:33 [stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 02/20] ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 03/20] mailbox: stm32_ipcc: add spinlock to fix channels concurrent access Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 04/20] crypto: stm31/hash - Fix hmac issue more than 256 bytes Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 05/20] media: stm32-dcmi: fix DMA corruption when stopping streaming Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 06/20] media: stm32-dcmi: fix check of pm_runtime_get_sync return value Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 07/20] hwrng: stm32 - fix unbalanced pm_runtime_enable Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 08/20] remoteproc: fix rproc_da_to_va in case of unallocated carveout Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 09/20] clk: stm32mp1: fix HSI divider flag Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 10/20] clk: stm32mp1: fix mcu divider table Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 11/20] clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 12/20] clk: stm32mp1: parent clocks update Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 13/20] mailbox: mailbox-test: fix null pointer if no mmio Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 14/20] pinctrl: stm32: fix memory leak issue Mathieu Poirier
2019-11-15 22:33 ` Mathieu Poirier [this message]
2019-11-15 22:33 ` [stable 4.19+][PATCH 16/20] ASoC: stm32: i2s: fix 16 bit format support Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 17/20] ASoC: stm32: i2s: fix IRQ clearing Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 18/20] ASoC: stm32: sai: add missing put_device() Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 19/20] media: ov5640: fix framerate update Mathieu Poirier
2019-11-15 22:33 ` [stable 4.19+][PATCH 20/20] dmaengine: stm32-dma: check whether length is aligned on FIFO threshold Mathieu Poirier
2019-11-21 20:35 ` [stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode Greg KH
2019-11-22 16:27 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191115223356.27675-15-mathieu.poirier@linaro.org \
--to=mathieu.poirier@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).