From: Forest Crossman <cyrozap@gmail.com>
To: linux-media@vger.kernel.org
Cc: Forest Crossman <cyrozap@gmail.com>,
linux-kernel@vger.kernel.org, mchehab@kernel.org
Subject: [PATCH] media: cx23885: Add support for AVerMedia CE310B
Date: Sat, 16 Nov 2019 16:38:40 -0600 [thread overview]
Message-ID: <20191116223840.2150-1-cyrozap@gmail.com> (raw)
The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.
I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:
* Sometimes when I switch inputs the video signal turns black and can't
be recovered until the system is rebooted. I haven't been able to
determine the cause of this behavior, nor have I found a solution to
fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
and some of the VBI data appears as noise at the top of the frame, but
I assume that to be a result of my very noisy RF environment and the
card's unshielded input traces rather than a configuration issue.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
---
drivers/media/pci/cx23885/cx23885-cards.c | 24 +++++++++++++++++++++++
drivers/media/pci/cx23885/cx23885-video.c | 3 ++-
drivers/media/pci/cx23885/cx23885.h | 1 +
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 8644205d3cd3..8e5a2c580821 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -801,6 +801,25 @@ struct cx23885_board cx23885_boards[] = {
.name = "Hauppauge WinTV-Starburst2",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_AVERMEDIA_CE310B] = {
+ .name = "AVerMedia CE310B",
+ .porta = CX23885_ANALOG_VIDEO,
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN1_CH1 |
+ CX25840_NONE_CH2 |
+ CX25840_NONE0_CH3,
+ .amux = CX25840_AUDIO7,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN8_CH1 |
+ CX25840_NONE_CH2 |
+ CX25840_VIN7_CH3 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -1124,6 +1143,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x0070,
.subdevice = 0xf02a,
.card = CX23885_BOARD_HAUPPAUGE_STARBURST2,
+ }, {
+ .subvendor = 0x1461,
+ .subdevice = 0x3100,
+ .card = CX23885_BOARD_AVERMEDIA_CE310B,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -2348,6 +2371,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_T982:
case CX23885_BOARD_VIEWCAST_260E:
case CX23885_BOARD_VIEWCAST_460E:
+ case CX23885_BOARD_AVERMEDIA_CE310B:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
index 8098b15493de..7fc408ee4934 100644
--- a/drivers/media/pci/cx23885/cx23885-video.c
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -257,7 +257,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
(dev->board == CX23885_BOARD_MYGICA_X8507) ||
(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
- (dev->board == CX23885_BOARD_VIEWCAST_460E)) {
+ (dev->board == CX23885_BOARD_VIEWCAST_460E) ||
+ (dev->board == CX23885_BOARD_AVERMEDIA_CE310B)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index a95a2e4c6a0d..c472498e57c4 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -101,6 +101,7 @@
#define CX23885_BOARD_HAUPPAUGE_STARBURST2 59
#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
+#define CX23885_BOARD_AVERMEDIA_CE310B 62
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
2.24.0
reply other threads:[~2019-11-16 22:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191116223840.2150-1-cyrozap@gmail.com \
--to=cyrozap@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).