[v2] arm64: dts: rockchip: Enable PCIe for Radxa Rock Pi 4 board
diff mbox series

Message ID 20191117101545.6406-1-matwey@sai.msu.ru
State New
Headers show
Series
  • [v2] arm64: dts: rockchip: Enable PCIe for Radxa Rock Pi 4 board
Related show

Commit Message

Matwey V. Kornilov Nov. 17, 2019, 10:15 a.m. UTC
Radxa Rock Pi 4 is equipped with M.2 PCIe slot,
so enable PCIe for the board.

The changes has been tested with Intel SSD 660p series device.

    01:00.0 Class 0108: Device 8086:f1a8 (rev 03)

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
---

Changes since v1:
 - add vpcie3v3-supply

 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Heiko Stuebner Nov. 18, 2019, 12:46 a.m. UTC | #1
Hi Matwey,

Am Sonntag, 17. November 2019, 11:15:37 CET schrieb Matwey V. Kornilov:
> Radxa Rock Pi 4 is equipped with M.2 PCIe slot,
> so enable PCIe for the board.
> 
> The changes has been tested with Intel SSD 660p series device.
> 
>     01:00.0 Class 0108: Device 8086:f1a8 (rev 03)
> 
> Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>

applied the patch, but you could do a follow-up that mimics
https://lore.kernel.org/linux-arm-kernel/20191117140728.917-1-linux.amoon@gmail.com/

aka find out from the schematics where the 0.9 and 1.8 supplies come from.

Thanks
Heiko
Matwey V. Kornilov Nov. 18, 2019, 6:40 p.m. UTC | #2
пн, 18 нояб. 2019 г. в 03:46, Heiko Stuebner <heiko@sntech.de>:
>
> Hi Matwey,
>
> Am Sonntag, 17. November 2019, 11:15:37 CET schrieb Matwey V. Kornilov:
> > Radxa Rock Pi 4 is equipped with M.2 PCIe slot,
> > so enable PCIe for the board.
> >
> > The changes has been tested with Intel SSD 660p series device.
> >
> >     01:00.0 Class 0108: Device 8086:f1a8 (rev 03)
> >
> > Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
>
> applied the patch, but you could do a follow-up that mimics
> https://lore.kernel.org/linux-arm-kernel/20191117140728.917-1-linux.amoon@gmail.com/
>
> aka find out from the schematics where the 0.9 and 1.8 supplies come from.

Current schematics
(https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdf)
is controversial on 1.8 supply:

On sheet 15 it says that 1.8 is supplied by VCC_1V8
at the same time on sheet 3 it says that it is supplied by VCCA_1V8

>
> Thanks
> Heiko
>
>
Tom Cubie Nov. 19, 2019, 12:44 a.m. UTC | #3
Hi, Matwey

On Tue, Nov 19, 2019 at 2:41 AM Matwey V. Kornilov
<matwey.kornilov@gmail.com> wrote:
>
> Current schematics
> (https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4_v13_sch_20181112.pdf)
> is controversial on 1.8 supply:
>
> On sheet 15 it says that 1.8 is supplied by VCC_1V8
> at the same time on sheet 3 it says that it is supplied by VCCA_1V8

I am sorry for the confusion of the schematic. Please ignore the power
tree on sheet 3, it's from the original reference design, I think we
have different power paths on ROCK Pi 4. Please refer the circuits
starting from sheet 5 below. It reflects the real hardware. We will
fix the power tree and upload a new version of the schematic.

>
> >
> > Thanks
> > Heiko
> >
> >
>
>
> --
> With best regards,
> Matwey V. Kornilov
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 1ae1ebd4efdd..01f8effd8206 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -463,6 +463,21 @@ 
 	pmu1830-supply = <&vcc_3v0>;
 };
 
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {