From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, jhugo@codeaurora.org,
robh+dt@kernel.org, jonathan@marek.ca
Cc: ohad@wizery.com, mark.rutland@arm.com, p.zabel@pengutronix.de,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
agross@kernel.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 12/16] remoteproc: qcom: pas: Add auto_boot flag
Date: Mon, 18 Nov 2019 21:44:08 +0000 [thread overview]
Message-ID: <0101016e8079129e-50ebd142-fc69-4652-99fd-6abf3cd186af-000000@us-west-2.amazonses.com> (raw)
In-Reply-To: <20191118214250.14002-1-sibis@codeaurora.org>
Add auto_boot flag and set it to false for modem. This allows for
the delayed boot up of modem after the dependencies are met in
userspace.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 98e9336302844..b5b6aee6e54a3 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -33,6 +33,7 @@ struct adsp_data {
const char *firmware_name;
int pas_id;
bool has_aggre2_clk;
+ bool auto_boot;
char **active_pd_names;
char **proxy_pd_names;
@@ -388,6 +389,8 @@ static int adsp_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ rproc->auto_boot = desc->auto_boot;
+
adsp = (struct qcom_adsp *)rproc->priv;
adsp->dev = &pdev->dev;
adsp->rproc = rproc;
@@ -471,6 +474,7 @@ static const struct adsp_data adsp_resource_init = {
.firmware_name = "adsp.mdt",
.pas_id = 1,
.has_aggre2_clk = false,
+ .auto_boot = true,
.ssr_name = "lpass",
.sysmon_name = "adsp",
.ssctl_id = 0x14,
@@ -481,6 +485,7 @@ static const struct adsp_data msm8998_adsp_resource = {
.firmware_name = "adsp.mdt",
.pas_id = 1,
.has_aggre2_clk = false,
+ .auto_boot = true,
.proxy_pd_names = (char*[]){
"cx",
NULL
@@ -495,6 +500,7 @@ static const struct adsp_data sm8150_adsp_resource = {
.firmware_name = "adsp.mdt",
.pas_id = 1,
.has_aggre2_clk = false,
+ .auto_boot = true,
.active_pd_names = (char*[]){
"load_state",
NULL
@@ -513,6 +519,7 @@ static const struct adsp_data cdsp_resource_init = {
.firmware_name = "cdsp.mdt",
.pas_id = 18,
.has_aggre2_clk = false,
+ .auto_boot = true,
.ssr_name = "cdsp",
.sysmon_name = "cdsp",
.ssctl_id = 0x17,
@@ -523,6 +530,7 @@ static const struct adsp_data sm8150_cdsp_resource = {
.firmware_name = "cdsp.mdt",
.pas_id = 18,
.has_aggre2_clk = false,
+ .auto_boot = true,
.active_pd_names = (char*[]){
"load_state",
NULL
@@ -541,6 +549,7 @@ static const struct adsp_data mpss_resource_init = {
.firmware_name = "modem.mdt",
.pas_id = 4,
.has_aggre2_clk = false,
+ .auto_boot = false,
.active_pd_names = (char*[]){
"load_state",
NULL
@@ -560,6 +569,7 @@ static const struct adsp_data slpi_resource_init = {
.firmware_name = "slpi.mdt",
.pas_id = 12,
.has_aggre2_clk = true,
+ .auto_boot = true,
.ssr_name = "dsps",
.sysmon_name = "slpi",
.ssctl_id = 0x16,
@@ -570,6 +580,7 @@ static const struct adsp_data msm8998_slpi_resource = {
.firmware_name = "slpi.mdt",
.pas_id = 12,
.has_aggre2_clk = true,
+ .auto_boot = true,
.proxy_pd_names = (char*[]){
"ssc_cx",
NULL
@@ -584,6 +595,7 @@ static const struct adsp_data sm8150_slpi_resource = {
.firmware_name = "slpi.mdt",
.pas_id = 12,
.has_aggre2_clk = false,
+ .auto_boot = true,
.active_pd_names = (char*[]){
"load_state",
NULL
@@ -602,6 +614,7 @@ static const struct adsp_data wcss_resource_init = {
.crash_reason_smem = 421,
.firmware_name = "wcnss.mdt",
.pas_id = 6,
+ .auto_boot = true,
.ssr_name = "mpss",
.sysmon_name = "wcnss",
.ssctl_id = 0x12,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-11-18 21:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191118214250.14002-1-sibis@codeaurora.org>
2019-11-18 21:43 ` [PATCH 01/16] remoteproc: q6v5-mss: fixup MSM8998 MSS out of reset sequence Sibi Sankar
2019-11-18 21:54 ` Jeffrey Hugo
2019-11-19 15:25 ` Sibi Sankar
[not found] ` <0101016e844504f1-d8bd27a5-c0bf-4b0b-8301-7bd8a890be80-000000@us-west-2.amazonses.com>
2019-11-19 15:43 ` Jeffrey Hugo
2019-11-20 12:01 ` Sibi Sankar
2019-11-18 21:43 ` [PATCH 02/16] remoteproc: q6v5-mss: Streamline the " Sibi Sankar
2019-11-18 21:43 ` [PATCH 03/16] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180 Sibi Sankar
2019-11-22 23:12 ` Rob Herring
2019-11-18 21:43 ` [PATCH 04/16] remoteproc: mss: q6v5-mss: Add modem support on SC7180 Sibi Sankar
2019-11-18 21:43 ` [PATCH 05/16] remoteproc: qcom: pas: Disable interrupt on clock enable failure Sibi Sankar
2019-11-18 21:43 ` [PATCH 06/16] dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS Sibi Sankar
2019-11-22 23:15 ` Rob Herring
2019-11-18 21:43 ` [PATCH 07/16] remoteproc: qcom: pas: Vote for active/proxy power domains Sibi Sankar
2019-11-18 21:43 ` [PATCH 08/16] dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC Sibi Sankar
2019-12-03 22:01 ` Rob Herring
2019-11-18 21:43 ` [PATCH 09/16] remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support Sibi Sankar
2019-11-18 21:43 ` [PATCH 10/16] dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS " Sibi Sankar
2019-12-03 22:02 ` Rob Herring
2019-11-18 21:43 ` [PATCH 11/16] remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem " Sibi Sankar
2019-11-18 21:44 ` Sibi Sankar [this message]
2019-11-18 21:44 ` [PATCH 13/16] arm64: dts: qcom: msm8998: Update reserved memory map Sibi Sankar
2019-11-18 22:04 ` Jeffrey Hugo
2019-11-19 12:28 ` sibis
2019-11-18 21:44 ` [PATCH 14/16] arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes Sibi Sankar
2019-11-18 22:07 ` Jeffrey Hugo
2019-11-19 12:29 ` sibis
2019-11-18 21:44 ` [PATCH 15/16] arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p Sibi Sankar
2019-11-18 21:44 ` [PATCH 16/16] arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs Sibi Sankar
2019-12-17 0:19 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0101016e8079129e-50ebd142-fc69-4652-99fd-6abf3cd186af-000000@us-west-2.amazonses.com \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jhugo@codeaurora.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).