linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Saravana Kannan <saravanak@google.com>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>,
	kernel-team@android.com, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1] clk: Keep boot clocks on for multiple consumers
Date: Mon, 18 Nov 2019 15:42:28 -0800	[thread overview]
Message-ID: <20191118234229.54085-1-saravanak@google.com> (raw)

Clocks can turned on (by the hardware, bootloader, etc) upon a
reset/boot of a hardware platform. These "boot clocks" could be clocking
devices that are active before the kernel starts running. For example,
clocks needed for the interconnects, UART console, display, CPUs, DDR,
etc.

When a boot clock is used by more than one consumer or multiple boot
clocks share a parent clock, the boot clock (or the common parent) can
be turned off when the first consumer probes. This can potentially crash
the device or cause poor user experience.

This patch fixes this by explicitly enabling the boot clocks during
clock registration and then disabling them at late_initcall_sync(). This
gives all the consumers until late_initcall() to put their "votes" in to
keep any of the boot clocks on past late_initcall().

Signed-off-by: Saravana Kannan <saravanak@google.com>
---
 drivers/clk/clk.c            | 62 ++++++++++++++++++++++++++++++++++++
 include/linux/clk-provider.h |  1 +
 2 files changed, 63 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1c677d7f7f53..a1b09c9f8845 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -72,6 +72,8 @@ struct clk_core {
 	unsigned long		flags;
 	bool			orphan;
 	bool			rpm_enabled;
+	bool			state_held;
+	bool			boot_enabled;
 	unsigned int		enable_count;
 	unsigned int		prepare_count;
 	unsigned int		protect_count;
@@ -1300,6 +1302,36 @@ static int clk_disable_unused(void)
 }
 late_initcall_sync(clk_disable_unused);
 
+static void clk_unprepare_disable_subtree(struct clk_core *core)
+{
+	struct clk_core *child;
+
+	lockdep_assert_held(&prepare_lock);
+
+	hlist_for_each_entry(child, &core->children, child_node)
+		clk_unprepare_disable_subtree(child);
+
+	if (!core->state_held)
+		return;
+
+	clk_core_disable_unprepare(core);
+}
+
+static int clk_release_boot_state(void)
+{
+	struct clk_core *core;
+
+	clk_prepare_lock();
+
+	hlist_for_each_entry(core, &clk_root_list, child_node)
+		clk_unprepare_disable_subtree(core);
+
+	clk_prepare_unlock();
+
+	return 0;
+}
+late_initcall_sync(clk_release_boot_state);
+
 static int clk_core_determine_round_nolock(struct clk_core *core,
 					   struct clk_rate_request *req)
 {
@@ -1674,6 +1706,30 @@ static int clk_fetch_parent_index(struct clk_core *core,
 	return i;
 }
 
+static void clk_core_hold_state(struct clk_core *core)
+{
+	if (core->state_held || !core->boot_enabled ||
+	    core->flags & CLK_DONT_HOLD_STATE)
+		return;
+
+	WARN(core->orphan, "%s: Can't hold state for orphan clk\n", core->name);
+
+	core->state_held = !clk_core_prepare_enable(core);
+}
+
+static void __clk_core_update_orphan_hold_state(struct clk_core *core)
+{
+	struct clk_core *child;
+
+	if (core->orphan)
+		return;
+
+	clk_core_hold_state(core);
+
+	hlist_for_each_entry(child, &core->children, child_node)
+		__clk_core_update_orphan_hold_state(child);
+}
+
 /*
  * Update the orphan status of @core and all its children.
  */
@@ -3374,6 +3430,8 @@ static int __clk_core_init(struct clk_core *core)
 		rate = 0;
 	core->rate = core->req_rate = rate;
 
+	core->boot_enabled = clk_core_is_enabled(core);
+
 	/*
 	 * Enable CLK_IS_CRITICAL clocks so newly added critical clocks
 	 * don't get accidentally disabled when walking the orphan tree and
@@ -3389,6 +3447,9 @@ static int __clk_core_init(struct clk_core *core)
 		clk_enable_unlock(flags);
 	}
 
+	if (!core->orphan)
+		clk_core_hold_state(core);
+
 	/*
 	 * walk the list of orphan clocks and reparent any that newly finds a
 	 * parent.
@@ -3408,6 +3469,7 @@ static int __clk_core_init(struct clk_core *core)
 			__clk_set_parent_after(orphan, parent, NULL);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
+			__clk_core_update_orphan_hold_state(orphan);
 		}
 	}
 
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 2fdfe8061363..f0e522ea793f 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -32,6 +32,7 @@
 #define CLK_OPS_PARENT_ENABLE	BIT(12)
 /* duty cycle call may be forwarded to the parent clock */
 #define CLK_DUTY_CYCLE_PARENT	BIT(13)
+#define CLK_DONT_HOLD_STATE	BIT(14) /* Don't hold state */
 
 struct clk;
 struct clk_hw;
-- 
2.24.0.432.g9d3f5f5b63-goog


             reply	other threads:[~2019-11-18 23:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-18 23:42 Saravana Kannan [this message]
2019-11-26  1:40 ` [PATCH v1] clk: Keep boot clocks on for multiple consumers Saravana Kannan
2020-01-14 17:15 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191118234229.54085-1-saravanak@google.com \
    --to=saravanak@google.com \
    --cc=kernel-team@android.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).