From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
Support Opensource <support.opensource@diasemi.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
kernel@collabora.com,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv2 6/6] ASoC: da7213: Add default clock handling
Date: Wed, 20 Nov 2019 16:24:06 +0100 [thread overview]
Message-ID: <20191120152406.2744-7-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20191120152406.2744-1-sebastian.reichel@collabora.com>
This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
sound/soc/codecs/da7213.c | 75 ++++++++++++++++++++++++++++++++++++---
sound/soc/codecs/da7213.h | 2 ++
2 files changed, 73 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
index 3e6ad996741b..ff1a936240be 100644
--- a/sound/soc/codecs/da7213.c
+++ b/sound/soc/codecs/da7213.c
@@ -1156,6 +1156,7 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
+ struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
u8 dai_ctrl = 0;
u8 fs;
@@ -1181,33 +1182,43 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
switch (params_rate(params)) {
case 8000:
fs = DA7213_SR_8000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
case 11025:
fs = DA7213_SR_11025;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
break;
case 12000:
fs = DA7213_SR_12000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
case 16000:
fs = DA7213_SR_16000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
case 22050:
fs = DA7213_SR_22050;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
break;
case 32000:
fs = DA7213_SR_32000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
case 44100:
fs = DA7213_SR_44100;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
break;
case 48000:
fs = DA7213_SR_48000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
case 88200:
fs = DA7213_SR_88200;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
break;
case 96000:
fs = DA7213_SR_96000;
+ da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
break;
default:
return -EINVAL;
@@ -1392,9 +1403,9 @@ static int da7213_set_component_sysclk(struct snd_soc_component *component,
}
/* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
-static int da7213_set_component_pll(struct snd_soc_component *component,
- int pll_id, int source,
- unsigned int fref, unsigned int fout)
+static int _da7213_set_component_pll(struct snd_soc_component *component,
+ int pll_id, int source,
+ unsigned int fref, unsigned int fout)
{
struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
@@ -1503,6 +1514,16 @@ static int da7213_set_component_pll(struct snd_soc_component *component,
return 0;
}
+static int da7213_set_component_pll(struct snd_soc_component *component,
+ int pll_id, int source,
+ unsigned int fref, unsigned int fout)
+{
+ struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+ da7213->fixed_clk_auto_pll = false;
+
+ return _da7213_set_component_pll(component, pll_id, source, fref, fout);
+}
+
/* DAI operations */
static const struct snd_soc_dai_ops da7213_dai_ops = {
.hw_params = da7213_hw_params,
@@ -1532,6 +1553,43 @@ static struct snd_soc_dai_driver da7213_dai = {
.symmetric_rates = 1,
};
+static int da7213_set_auto_pll(struct snd_soc_component *component, bool enable)
+{
+ struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+ int mode;
+
+ if (!da7213->fixed_clk_auto_pll)
+ return 0;
+
+ da7213->mclk_rate = clk_get_rate(da7213->mclk);
+
+ if (enable)
+ mode = DA7213_SYSCLK_PLL;
+ else
+ mode = DA7213_SYSCLK_MCLK;
+
+ switch (da7213->out_rate) {
+ case DA7213_PLL_FREQ_OUT_90316800:
+ if (da7213->mclk_rate == 11289600 ||
+ da7213->mclk_rate == 22579200 ||
+ da7213->mclk_rate == 45158400)
+ mode = DA7213_SYSCLK_MCLK;
+ break;
+ case DA7213_PLL_FREQ_OUT_98304000:
+ if (da7213->mclk_rate == 12288000 ||
+ da7213->mclk_rate == 24576000 ||
+ da7213->mclk_rate == 49152000)
+ mode = DA7213_SYSCLK_MCLK;
+
+ break;
+ default:
+ return -1;
+ }
+
+ return _da7213_set_component_pll(component, 0, mode,
+ da7213->mclk_rate, da7213->out_rate);
+}
+
static int da7213_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
@@ -1551,6 +1609,8 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
"Failed to enable mclk\n");
return ret;
}
+
+ da7213_set_auto_pll(component, true);
}
}
break;
@@ -1562,8 +1622,10 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
DA7213_VMID_EN | DA7213_BIAS_EN);
} else {
/* Remove MCLK */
- if (da7213->mclk)
+ if (da7213->mclk) {
+ da7213_set_auto_pll(component, false);
clk_disable_unprepare(da7213->mclk);
+ }
}
break;
case SND_SOC_BIAS_OFF:
@@ -1829,6 +1891,11 @@ static int da7213_probe(struct snd_soc_component *component)
return PTR_ERR(da7213->mclk);
else
da7213->mclk = NULL;
+ } else {
+ /* Do automatic PLL handling assuming fixed clock until
+ * set_pll() has been called. This makes the codec usable
+ * with the simple-audio-card driver. */
+ da7213->fixed_clk_auto_pll = true;
}
return 0;
diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
index 3890829dfb6e..97ccf0ddd2be 100644
--- a/sound/soc/codecs/da7213.h
+++ b/sound/soc/codecs/da7213.h
@@ -535,10 +535,12 @@ struct da7213_priv {
struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES];
struct clk *mclk;
unsigned int mclk_rate;
+ unsigned int out_rate;
int clk_src;
bool master;
bool alc_calib_auto;
bool alc_en;
+ bool fixed_clk_auto_pll;
struct da7213_platform_data *pdata;
};
--
2.24.0
next prev parent reply other threads:[~2019-11-20 15:24 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 15:24 [PATCHv2 0/6] ASoC: da7213: support for usage with simple-card Sebastian Reichel
2019-11-20 15:24 ` [PATCHv2 1/6] ASoC: da7213: Add da7212 DT compatible Sebastian Reichel
2019-11-21 20:10 ` Adam Thomson
2019-11-22 17:20 ` Sebastian Reichel
2019-11-20 15:24 ` [PATCHv2 2/6] ASoC: da7213: Add regulator support Sebastian Reichel
2019-11-21 21:15 ` Adam Thomson
2019-11-22 17:09 ` Sebastian Reichel
2019-11-26 17:02 ` Adam Thomson
2019-11-20 15:24 ` [PATCHv2 3/6] ASoC: da7213: Provide selectable option Sebastian Reichel
2019-11-26 17:05 ` Adam Thomson
2019-11-20 15:24 ` [PATCHv2 4/6] ASoC: da7213: Move set_sysclk to codec level Sebastian Reichel
2019-11-26 17:09 ` Adam Thomson
2019-11-20 15:24 ` [PATCHv2 5/6] ASoC: da7213: Move set_pll " Sebastian Reichel
2019-11-26 17:10 ` Adam Thomson
2019-11-20 15:24 ` Sebastian Reichel [this message]
2019-11-21 21:49 ` [PATCHv2 6/6] ASoC: da7213: Add default clock handling Adam Thomson
2019-11-26 16:55 ` Adam Thomson
2019-11-26 17:08 ` Mark Brown
2019-11-26 17:39 ` Adam Thomson
2019-11-26 17:50 ` Mark Brown
2019-11-27 11:32 ` Adam Thomson
2019-11-27 12:33 ` Mark Brown
2019-11-27 13:42 ` Adam Thomson
2019-11-27 15:40 ` Mark Brown
2019-11-27 16:33 ` Adam Thomson
2019-11-27 16:41 ` Mark Brown
2019-11-27 18:10 ` Adam Thomson
2019-11-28 13:13 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120152406.2744-7-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kernel@collabora.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=support.opensource@diasemi.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).