From: Krzysztof Kozlowski <krzk@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Subject: [PATCH v2] auxdisplay: Fix Kconfig indentation
Date: Thu, 21 Nov 2019 04:20:41 +0100 [thread overview]
Message-ID: <1574306441-29723-1-git-send-email-krzk@kernel.org> (raw)
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
---
drivers/auxdisplay/Kconfig | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index b8313a04422d..48efa7a047f3 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -111,7 +111,7 @@ config CFAG12864B
If unsure, say N.
config CFAG12864B_RATE
- int "Refresh rate (hertz)"
+ int "Refresh rate (hertz)"
depends on CFAG12864B
default "20"
---help---
@@ -329,7 +329,7 @@ config PANEL_LCD_PROTO
config PANEL_LCD_PIN_E
depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
- int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
range -17 17
default 14
---help---
@@ -344,7 +344,7 @@ config PANEL_LCD_PIN_E
config PANEL_LCD_PIN_RS
depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
- int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
range -17 17
default 17
---help---
@@ -359,7 +359,7 @@ config PANEL_LCD_PIN_RS
config PANEL_LCD_PIN_RW
depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
- int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
range -17 17
default 16
---help---
@@ -374,7 +374,7 @@ config PANEL_LCD_PIN_RW
config PANEL_LCD_PIN_SCL
depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
- int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
range -17 17
default 1
---help---
@@ -389,7 +389,7 @@ config PANEL_LCD_PIN_SCL
config PANEL_LCD_PIN_SDA
depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
- int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
range -17 17
default 2
---help---
@@ -404,12 +404,12 @@ config PANEL_LCD_PIN_SDA
config PANEL_LCD_PIN_BL
depends on PANEL_PROFILE="0" && PANEL_LCD="1"
- int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
+ int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
range -17 17
default 0
---help---
This describes the number of the parallel port pin to which the LCD 'BL' signal
- has been connected. It can be :
+ has been connected. It can be :
0 : no connection (eg: connected to ground)
1..17 : directly connected to any of these pins on the DB25 plug
--
2.7.4
next reply other threads:[~2019-11-21 3:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 3:20 Krzysztof Kozlowski [this message]
2020-03-06 21:04 ` [PATCH v2] auxdisplay: Fix Kconfig indentation Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574306441-29723-1-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miguel.ojeda.sandonis@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).